scholarly journals Numerical Investigation of Powered Jet Effects by RANS/LES Hybrid Methods

2019 ◽  
Vol 37 (3) ◽  
pp. 565-571
Author(s):  
Zhibin Gong ◽  
Jie Li ◽  
Jixiang Shan ◽  
Heng Zhang
Keyword(s):  
Numerical Investigation ◽  
Hybrid Methods ◽  
Three Dimensional ◽  
Jet Flow ◽  
Weno Scheme ◽  
Detached Eddy Simulation ◽  
Turbulent Structures ◽  
Ambient Flow ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

For the high-precision simulation of engine jet effects, an improved delayed detached eddy simulation (IDDES) method based on the two-equation shear stress transport (SST) model is developed, and the fifth-order finite-volume weighted essentially non-oscillatory (WENO) scheme is employed to enhance accuracy of spatial discretization, and then numerical investigation of powered jet effects by RANS/LES hybrid methods is carried out. The effects of the grid distributions and the accuracy of the spatial schemes are discussed during the RANS/LES validation analysis on the fully expanded jet flow and Acoustic Reference Nozzle (ARN) jet flow. The results show that, by enlarging the grid density and improving the accuracy of the spatial schemes, the velocity distributions in the jet flow can be better predicted, the non-physical steady flow after the jet nozzle can be shortened, the instantaneous flow structures are clearer and the turbulent intensities are more accurate. Then IDDES simulation of turbofan engine jet flow is carried out. The mixing characteristics of the external fan jet flow and internal core jet flow as well as the ambient flow are obtained, and the three-dimensional turbulent structures are also given.

scholarly journals Numerical Analysis of Side-loads Reduction in a Sub-scale Dual-bell Rocket Nozzle

2021 ◽  
Author(s):  
M. Cimini ◽  
E. Martelli ◽  
M. Bernardini
Keyword(s):  
Inflection Point ◽  
Pressure Ratio ◽  
Mean Value ◽  
Detached Eddy Simulation ◽  
Turbulent Structures ◽  
Eddy Simulation ◽  
Separation Shock ◽  
Delayed Detached Eddy Simulation ◽  
Controlled Flow ◽  
Dual Bell

AbstractA calibrated delayed detached eddy simulation of a sub-scale cold-gas dual-bell nozzle flow at high Reynolds number and in sea-level mode is carried out at nozzle pressure ratio NPR = 45.7. In this regime the over-expanded flow exhibits a symmetric and controlled flow separation at the inflection point, that is the junction between the two bells, leading to the generation of a low content of aerodynamic side loads with respect to conventional bell nozzles. The nozzle wall-pressure signature is analyzed in the frequency domain and compared with the experimental data available in the literature for the same geometry and flow conditions. The Fourier spectra in time and space (azimuthal wavenumber) show the presence of a persistent tone associated to the symmetric shock movement. Asymmetric modes are only slightly excited by the shock and the turbulent structures. The low mean value of the side-loads magnitude is in good agreement with the experiments and confirms that the inflection point dampens the aero-acoustic interaction between the separation-shock and the detached shear layer.

scholarly journals Prediction and measurement of the aerodynamic performance of a wind turbine

2018 ◽  
Vol 240 ◽  
pp. 04001
Author(s):  
Ali Cemal Benim ◽  
Michael Diederich ◽  
Fethi Gül
Keyword(s):  
Wind Turbine ◽  
Transport Model ◽  
Three Dimensional ◽  
Detached Eddy Simulation ◽  
Simulation Framework ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Shear Stress Transport Model ◽  
Flow Turbulence ◽  
Good Agreement

Aerodynamic behavior of a small wind turbine is analyzed, both experimentally and numerically. Mainly, an unsteady three-dimensional formulation is adopted, where the flow turbulence is modelled by an Improved Delayed Detached Eddy Simulation framework, using the four-equation transitional Shear Stress Transport model, as the turbulence model. A quite good agreement between the measurements and calculations is observed.

Improved Delayed Detached Eddy Simulation (IDDES) of a 1.5 Stage Axial Compressor Non-Synchronous Vibration

2020 ◽  
Author(s):  
Purvic Patel ◽  
Yunchao Yang ◽  
Gecheng Zha
Keyword(s):  
Rotor Blade ◽  
High Speed ◽  
Stokes Equations ◽  
Axial Compressor ◽  
Suction Side ◽  
Tip Vortex ◽  
Weno Scheme ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

Abstract This paper utilizes the Improved Delayed Detached Eddy Simulation (IDDES) to investigate the non-synchronous vibration (NSV) mechanism of a 1.5 stage high-speed axial compressor. The NSV occurs at a part speed in the rig test. A low diffusion E-CUSP approximate Riemann solver with a third order Weighted Essentially Non-Oscillating (WENO) scheme for the inviscid flux and a second order central differencing scheme for the viscous flux are employed to solve the 3D time accurate Navier-Stokes equations. The fully conservative sliding boundary condition is used to preserve the wake-propagation. The aerodynamic instability in the tip region induces two alternating low pressure regions near the leading and the trailing edge on the suction side of the rotor blade. It is observed that the circumferential tip vortex motion in the rotor passage above 75 % span and its coupling forces cause NSV at the operating speed. This instability moves in the counter-rotating direction in the rotational frame. The NSV results using URANS simulation is also presented for comparison. The predicted frequency with the IDDES and URANS using rigid blades agrees well with the measured frequency in the rig test. In addition to the NSV, the IDDES solver also captures the dominant engine order frequencies. The tip flow structures show the vortex filament with one end on the suction side of the rotor blade and other side terminating on the casing or the pressure side of the rotor blade.

scholarly journals Simulation of transonic buffet with an automated zonal DES approach

2020 ◽  
Vol 11 (4) ◽  
pp. 1025-1036
Author(s):  
Maximilian Ehrle ◽  
Andreas Waldmann ◽  
Thorsten Lutz ◽  
Ewald Krämer
Keyword(s):  
Three Dimensional ◽  
Reynolds Numbers ◽  
Research Model ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Shock Motion ◽  
Convection Speed ◽  
Transonic Buffet ◽  
Simulation Time

Abstract A study of transonic buffet on the NASA Common Research Model at flight Reynolds numbers is presented. The ability of two different hybrid RANS/LES models as well as the URANS approach for resolving three-dimensional buffet motion was evaluated by means of spectral analysis. Automated Zonal DES and URANS simulations show similar results in terms of buffet frequency and spanwise propagation of buffet cells, whereas the Delayed Detached Eddy Simulation results indicate a strong interaction between flow separation and shock motion. The extracted characteristic frequencies which are associated with transonic buffet are located in a range of Sr = 0.2–0.65 for URANS and AZDES and are therefore in accordance with findings from related recent research. Furthermore, the simulation time series were investigated and a structure of spanwise moving buffet cells with varying convection speed and wavelength could be observed.

Sign in / Sign up

Export Citation Format

Share Document