scholarly journals Phenomenological Constitutive Equations for Numerical Simulations of SMA's Structures. Effects of Thermomechanical Couplings

1996 ◽  
Vol 06 (C1) ◽  
pp. C1-347-C1-356 ◽  
Author(s):  
R. Peyroux ◽  
A. Chrysochoos ◽  
C. Licht ◽  
M. Löbel
2020 ◽  
Vol 45 (3) ◽  
pp. 223-246
Author(s):  
Roula Al Nahas ◽  
Alexandre Charles ◽  
Benoît Panicaud ◽  
Emmanuelle Rouhaud ◽  
Israa Choucair ◽  
...  

AbstractThe question of frame-indifference of the thermomechanical models has to be addressed to deal correctly with the behavior of matter undergoing finite transformations. In this work, we propose to test a spacetime formalism to investigate the benefits of the covariance principle for application to covariant modeling and numerical simulations for finite transformations. Several models especially for heat conduction are proposed following this framework and next compared to existing models. This article also investigates numerical simulations using the heat equation with two different thermal dissipative models for heat conduction, without thermomechanical couplings. The numerical comparison between the spacetime thermal models derived in this work and the corresponding Newtonian thermal models, which adds the time as a discretized variable, is also performed through an example to investigate their advantages and drawbacks.


2016 ◽  
Vol 716 ◽  
pp. 251-261 ◽  
Author(s):  
Nicholas J. Politis ◽  
Denis J. Politis ◽  
Catrin Mair Davies ◽  
Jian Guo Lin

Constitutive equations have been used extensively to accurately describe material properties over a wide range of temperatures and strain rates in numerical simulations. In this paper, an algorithmic method of determining the constants of such constitutive equations is presented. The Genetic Algorithm implementation utilising MATLAB is described, and example fits to experimental data are presented.


2009 ◽  
Vol 1188 ◽  
Author(s):  
Charles Brugger ◽  
Marc C. Fivel ◽  
Yves Bréchet

AbstractPlanar assemblies of interlocked cubic blocs have been tested in indentation. Experiments are performed on blocs made of plaster. Influence of key parameters such as the surface roughness, the compression stress and the number of blocs are investigated. A numerical modeling is then proposed based on discrete element method. Each bloc is represented by its centre coordinates. Constitutive equations obtained by finite element simulations are introduced to model the contact between the blocs. The numerical tool is then applied to the case of indentation loading. It is found that the model reproduces all the experimental tendencies.


2020 ◽  
Vol 640 ◽  
pp. A53
Author(s):  
L. Löhnert ◽  
S. Krätschmer ◽  
A. G. Peeters

Here, we address the turbulent dynamics of the gravitational instability in accretion disks, retaining both radiative cooling and irradiation. Due to radiative cooling, the disk is unstable for all values of the Toomre parameter, and an accurate estimate of the maximum growth rate is derived analytically. A detailed study of the turbulent spectra shows a rapid decay with an azimuthal wave number stronger than ky−3, whereas the spectrum is more broad in the radial direction and shows a scaling in the range kx−3 to kx−2. The radial component of the radial velocity profile consists of a superposition of shocks of different heights, and is similar to that found in Burgers’ turbulence. Assuming saturation occurs through nonlinear wave steepening leading to shock formation, we developed a mixing-length model in which the typical length scale is related to the average radial distance between shocks. Furthermore, since the numerical simulations show that linear drive is necessary in order to sustain turbulence, we used the growth rate of the most unstable mode to estimate the typical timescale. The mixing-length model that was obtained agrees well with numerical simulations. The model gives an analytic expression for the turbulent viscosity as a function of the Toomre parameter and cooling time. It predicts that relevant values of α = 10−3 can be obtained in disks that have a Toomre parameter as high as Q ≈ 10.


2007 ◽  
Vol 17 (4) ◽  
pp. 347-380 ◽  
Author(s):  
Mohammad P. Fard ◽  
Denise Levesque ◽  
Stuart Morrison ◽  
Nasser Ashgriz ◽  
J. Mostaghimi

Sign in / Sign up

Export Citation Format

Share Document