scholarly journals Analytical analysis of the stress-strain state of the system “mechanized equipment complex - support – rock mass” in the bottomhole area of the shaft

2018 ◽  
Vol 193 ◽  
pp. 02026 ◽  
Author(s):  
Alexander Pankratenko ◽  
Mikhail Pleshko ◽  
Alexander Isaev
Keyword(s):  
Rock Mass ◽  
Strain State ◽  
Payback Period ◽  
System Support ◽  
Capital Investments ◽  
Underground Structures ◽  
System Operation ◽  
Technological Factors ◽  
Geotechnical System ◽  
Planar Contact

The development of new deposits requires the construction of deep and super deep vertical shafts. The duration of their construction reaches 8 - 10 years with multi-billion capital investments. To reduce the payback period of these costs, it is necessary to develop and implement effective solutions to increase the speed of sinking operations through the wide introduction of brand-new mechanized equipment complexes. In response to the sinking in the bottomhole area of the shaft, the following geotechnical system is being formed: “tunnelling system - support - rock mass”, the regularities of which require further study. For these purposes, an analytical method for calculating the shaft support can be used in the context of consideration of a planar contact problem at various phases of the system operation. The mutual coordination of individual phases in accordance with the classical concepts of the underground structures mechanics is possible using a correction factor to the magnitude of horizontal stresses in the rock mass. In this paper, we developed the algorithm which determines this coefficient, taking into account the influence of the main technological factors: the pressure of the jack system of the complex and the speed of sinking.

scholarly journals The Analysis of the Stress-Strain State of the System “Equipment Complex - Support - Rock Mass” in the Bottomhole Area of the Shaft

2018 ◽  
Vol 41 ◽  
pp. 01038
Author(s):  
Alexander Pankratenko ◽  
Alexander Isaev
Keyword(s):  
Rock Mass ◽  
Payback Period ◽  
System Support ◽  
Capital Investments ◽  
Underground Structures ◽  
System Operation ◽  
Technological Factors ◽  
Tunneling System ◽  
System Pressure ◽  
Planar Contact

The development of new deposits enterprises requires the construction of deep and super deep vertical shafts. The duration of their construction reaches 8 - 10 years with multi-billion capital investments. To reduce the payback period of these costs, it is necessary to develop and implement effective solutions to increase the speed of sinking operations through the wide introduction of brand-new mechanized equipment complexes. In response to the sinking in the bottomhole area of the shaft a complex, the following geotechnological system is being formed: "tunneling system - support - rock mass", the regularities of which require further study. For these purposes, an analytical method for calculating the shaft support can be used in the context of consideration of a planar contact problem at various phases of the system operation. The mutual coordination of individual phases in accordance with the classical concepts of the underground structures mechanics is possible with the help of a correction factor to the magnitude of horizontal stresses in the rock mass. In this paper we developed the algorithm which determines this coefficient, taking into account the influence of the main technological factors: the jack system pressure of the complex and the speed of sinking.

Application of Numerical and Block Geomechanical Modelling to Determine Parameters of Large-Section Chambers

2021 ◽  
pp. 127-131
Author(s):  
M.A. Sonnov ◽  
A.V. Trofimov ◽  
A.E. Rumyantsev ◽  
S.V. Shpilev
Keyword(s):  
Rock Mass ◽  
Strain State ◽  
Stress And Strain ◽  
Underground Structures ◽  
Geomechanical Model ◽  
Principal Stresses ◽  
Mine Support ◽  
History Of ◽  
Crushing Plant ◽  
Ore Pass

The study is exemplified by complex workings of a main ore pass that include a variety of underground structures, usually with unique dimensions which depend on the function and size of the equipment placed. The technical solutions for the underground crushing plant and associated structures envisage construction of chambers with the height of up to 35 m and the width of up to 20 m at the depths exceeding 800-1000 m. Such conditions call for a closer attention to be paid to the mine support parameters, especially the bolting depth. A block geomechanical model was designed in the Micromine Mining Software for the rock mass of the new main ore pass. Geotechnical boreholes logs and results of physical and mechanical rock tests were used as the input data for the model. Four domains were identified in the block geomechanical model for subsequent numerical modelling. A 3D model of the stress-and-strain state of the rock mass was made using the CAE Fidesys software based on the Micromine wire-frame model of the main ore pass. The history of the rock mass incremental loading was reconstructed for correct simulation of its stress-and-strain state. Prior to the excavation, the rock mass is pre-stressed by the weight of the rock strata. The excavation phase was then simulated in the stepwise manner. An array of points with the values of maximum principal stresses was downloaded from the numerical model post-processing program and interpolated into the block geomechanical model to refine the SRF parameter of the Barton's Q rating. Based on the obtained Q values, the mine support parameters for chambers were determined using the Barton, Hutchinson and Potvin empirical methods.

scholarly journals Substantiating the optimal type of mine working fastening based on mathematical modeling of the stress condition of underground structures

2021 ◽  
pp. 57-63
Author(s):  
A.K Matayev ◽  
V.H Lozynskyi ◽  
A Musin ◽  
R.M Abdrashev ◽  
A.S Kuantay ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Rock Mass ◽  
Mine Working ◽  
Strain State ◽  
Processing Plant ◽  
Underground Structures ◽  
Stress Strain ◽  
Initial Stress Field ◽  
Stress Strain State ◽  
Mine Workings

Purpose. Predicting the formation of a stress-strain state (SSS) in the rock mass within the boundaries of influence of stope operations on the horizon -480 m in axes 2028 at the 10th Anniversary of Kazakhstans Independence (DNK) Mine. Methodology. An engineering-geological data on the host rocks properties are analyzed based on the international ISRM standard. Numerical modelling of the rock mass stress-strain state and the calculation of the load-bearing capacity of the compound support (roof-bolt+shotcrete+mesh) and arch support used at the mine are performed with the help of the RS2 software. This program, based on the Finite Element Method in a two-dimensional formulation, makes it possible to take into account a significant number of factors influencing the rock mass state. Findings. The calculations performed indicate that the support resistance is incommensurably low in comparison with the values of the initial stress field components in the rock mass. In such conditions, it may be more effective to strengthen the mass in the vicinity of mine working than setting more frames or using more massive support profiles. Originality. The paper presents the results of mathematical modeling and calculation of the stress-strain state of the underground supporting aquifer rock mass structures developed for complex mining-and-geological and geomechanical conditions of driving, supporting and operating mine workings on deep horizons of the mines at Donskoy Ore Mining and Processing Plant. Based on the performed research, the preliminary (advanced) strengthening of the border rock mass in the zone of inelastic (destructive) deformations has been substantiated, as a priority method to control the stability of mine workings. Practical value. The research results can be used when creating a geomechanical model of the field and designing stable parameters of mine working support.

scholarly journals PRINCIPLES OF CALCULATION AND MONITORING OF STRESS-STRAIN STATE OF THE GRADE-SEPARATED TRAFFIC INTERCHANGES IN MINSK

2017 ◽  
Vol 2 (49) ◽  
pp. 126-134
Author(s):  
G. P. Pastushkov ◽  
V. G. Pastushkov
Keyword(s):  
Data Transmission ◽  
Work Performance ◽  
Strain State ◽  
Calculation Model ◽  
Continuous Control ◽  
Building Structures ◽  
Underground Structures ◽  
Construction Monitoring ◽  
Online Mode ◽  
Surrounding Soil

The results of scientific accompaniment and monitoring of construction of the transport interchange at the intersection of Independence Avenue and Filimonova Street over tunnels and other structures of Minsk subway. In order to ensure (in three shifts) the construction and installation works at construction of transport interchange around a number of innovative technologies in both for designing and work performance has been used. Construction monitoring envisaged continuous control of deformations and stresses of constructions of underground tunnels in the online mode and data transmission to all interested organizations. The calculation model of the existing tunnels has been developed, which includes the design of the lining and the surrounding soil massif. A theory for calculating underground structures based on the deformation of materials of building structures and geomechanical models composing a soil massif has been proposed.

scholarly journals Research into stress-strain state of the rock mass condition in the process of the operation of double-unit longwalls

2020 ◽  
Vol 14 (2) ◽  
pp. 85-94
Author(s):  
Roman Dychkovskyi ◽  
Iaroslav Shavarskyi ◽  
Pavlo Saik ◽  
Vasyl Lozynskyi ◽  
Volodymyr Falshtynskyi ◽  
...  
Keyword(s):  
Rock Mass ◽  
Strain State ◽  
Stress Strain ◽  
Stress Strain State ◽  
Rock Mass Condition

scholarly journals Determination and quality classification of rock mass of the Diatomite mine, Algeria

2021 ◽  
Vol 1 ◽  
pp. 17-24
Author(s):  
Abdessattar LAMAMRA ◽  
◽  
Dmitriy Leonidovich NEGURITSA ◽  
Samir BEDR ◽  
Ariant A. REKA ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Rock Mass ◽  
Underground Mining ◽  
Physical And Mechanical Properties ◽  
Friction Angle ◽  
Classification Systems ◽  
Natural Phenomenon ◽  
Underground Structures ◽  
Dilatancy Angle ◽  
Mining Work

Reserch relaevance. Most ground movements are generally due to rock instability, this natural phenomenon poses a risk to humanity. The properties of the rock mass directly influence the type of movement especially in underground structures. Research aim. Our goal is to characterize and classify the rock mass of diatomite from the sig mine using geomechanical classification systems such as the RQD and RMR in order to determine the quality of the rocks in the sig mine Western Algeria from the determination of the physical and mechanical properties. Methodology. In this article, the characterization analysis of the diatomite rock mass of the sig mine was carried out. First, determinations of the physical properties and carried out the triaxial test to determine the mechanical properties (young’s modulus, the friction angle, the dilatancy angle, the cohesion, the poisson’s ratio). Secondly to classify the deposit and give a recommendation to avoid stability problems. Research results. The results from physical and mechanical analyzes, it can be said that the nature of the rock present in the diatomite (underground mine) does not have enough resistance. Conclusion. Our study definitively proves that the rock mass of sig diatomite is of very low quality and it will be very dangerous for the underground mining work of the mine especially in places where the mineralized layer is very deep. And we suggest to replace the mining technique room and pillar currently used in the diatomite mine and put another mining method which includes roof support system to ensure the safety both of the miners and the equipment.

Sign in / Sign up

Export Citation Format

Share Document