scholarly journals Study on the Characterization Method of Ultrasonic Cavitation Field based on the Numerical Simulation of the Amplitude of Sound Pressure

2020 ◽  
Vol 319 ◽  
pp. 02003
Author(s):  
Tangfei Tao ◽  
Jinmin Zhao ◽  
Wei Wang
Keyword(s):  
Numerical Simulation ◽  
Field Distribution ◽  
Sound Pressure ◽  
Ultrasonic Cavitation ◽  
Distribution Area ◽  
Three Dimensional Model ◽  
Distribution Law ◽  
Finite Element Software ◽  
Cavitation Effect ◽  
Cavitation Field

In order to meet the visualization requirements of the cavitation field distribution in the ultrasonic cavitation reactor, a method based on the numerical simulation of the amplitude of sound pressure is proposed. In order to verify that the amplitude of sound pressure plays a decisive role in cavitation effect, the dynamic equation of a single cavitation bubble is established, and the influence law of the amplitude of sound pressure on cavitation motion is analyzed in principle; then, the three-dimensional model of the self-built drum type ultrasonic cavitation reactor is built using the finite element software COMSOL Multiphysics, and the amplitude distribution of the sound pressure at the longitudinal section is obtained when the liquid height was 25 mm, 60 mm and 90 mm. Through the comparison of aluminum foil corrosion experiments, it shows that the numerical simulation method based on the amplitude of sound pressure can accurately characterize the distribution area of ultrasonic cavitation field, which overcomes the disadvantage of time-consuming and labor-consuming in the traditional measurement method of cavitation field distribution, and lays a foundation for the study of the distribution law of ultrasonic cavitation field.

A Calculation Method of Magnetic Anomaly Field Distribution of Ellipsoid with Arbitrary Posture

2021 ◽  
Author(s):  
Song-tong Han ◽  
Bo Zhang ◽  
Xiao-li Rong ◽  
Lei-xiang Bian ◽  
Guo-kai Zhang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Finite Element ◽  
Magnetic Anomaly ◽  
Field Distribution ◽  
Calculation Method ◽  
Gravity Potential ◽  
Anomaly Field ◽  
Finite Element Software ◽  
Wide Range ◽  
Distribution Equation

The ellipsoidal magnetization model has a wide range of application scenarios. For example, in aviation magnetic field prospecting, mineral prospecting, seabed prospecting, and UXO (unexploded ordnance) detection. However, because the existing ellipsoid magnetization formula is relatively complicated, the detection model is usually replaced by a dipole. Such a model increases the error probability and poses a significant challenge for subsequent imaging and pattern recognition. Based on the distribution of ellipsoid gravity potential and magnetic potential, the magnetic anomaly field distribution equation generated by the ellipsoid is deduced by changing the aspect ratio, making the ellipsoid equivalent to a sphere. The result of formula derivation shows that the two magnetic anomaly fields are consistent. This paper uses COMSOL finite element software to model UXO, ellipsoids, and spheres and analyzes magnetic anomalies. The conclusion shows that the ellipsoid model can completely replace the UXO model when the error range of 1nT is satisfied. Finally, we established two sets of ellipsoids and calculated the magnetic anomalous field distributions on different planes using deduction formulas and finite element software. We compared the experimental results and found that the relative error of the two sets of data was within [Formula: see text]‰. Error analysis found that the error distribution is standardized and conforms to the normal distribution. The above mathematical analysis and finite element simulation prove that the calculation method is simple and reliable and provides a magnetic field distribution equation for subsequent UXO inversion.

scholarly journals Numerical simulation of blanking process

2018 ◽  
Vol 157 ◽  
pp. 02038
Author(s):  
Peter Pecháč ◽  
Milan Sága
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Steel Sheet ◽  
Plastic Material ◽  
Material Model ◽  
Rolled Steel ◽  
Finite Element Software ◽  
History Of ◽  
Cold Rolled ◽  
Blanking Process

This paper presents numerical simulation of blanking process for cold-rolled steel sheet metal. The problem was modeled using axial symmetry in commercial finite element software ADINA. Data obtained by experimental measurement were used to create multi-linear plastic material model for simulation. History of blanking force vs. tool displacement was obtained.

scholarly journals Research on Parametric Design of Hydraulic Retarder Based on Multi-Field Coupling of Heat, Fluid and Solid

2015 ◽  
Vol 9 (1) ◽  
pp. 58-64 ◽  
Author(s):  
Kuiyang Wang ◽  
Jinhua Tang ◽  
Guoqing Li
Keyword(s):  
Numerical Simulation ◽  
Parametric Design ◽  
Design Method ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Field Coupling ◽  
Sequential Coupling ◽  
Fluid Coupling ◽  
Hydraulic Retarder

In order to optimize the design method and improve the performance of hydraulic retarder, the numerical simulation of multi-field coupling of heat, fluid and solid is carried out to hydraulic retarder, based on the numerical computation and algorithm of heat-fluid coupling and fluid-solid coupling. The computation models of heat-fluid coupling and fluid-solid coupling of hydraulic retarder are created. The three dimensional model of hydraulic retarder is established based on CATIA software, and the whole flow passage model of hydraulic retarder is extracted on the basis of the three dimensional model established. Based on the CFD calculation and the finite element numerical simulation, the temperature field, stress field, deformation and stress state are analysised to hydraulic retarder in the state of whole filling when the rotate speed is 1600 r/min. In consideration of rotating centrifugal force, thermal stress and air exciting vibration force of blade surface, by using the sequential coupling method, the flow field characteristics of hydraulic retarder and dynamic characteristics of blade structure are analysised and researched based on multi-field coupling of heat, fluid and solid. These provide the theoretical foundation and references for parametric design of hydraulic retarder.

scholarly journals Development Trend and Stability Analysis of Creep Landslide With Obvious Slip Zone Under Rainfall-Taking Xinchang Xiashan Basalt Slope as an Example

2022 ◽  
Vol 9 ◽  
Author(s):  
Chunyan Bao ◽  
Lingtao Zhan ◽  
Yingjie Xia ◽  
Yongliang Huang ◽  
Zhenxing Zhao
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Stability Analysis ◽  
Soil Layer ◽  
Heavy Rain ◽  
Development Trend ◽  
Sliding Surface ◽  
Landslide Area ◽  
Finite Element Software ◽  
Sliding Zone

The creep slope is a dynamic development process, from stable deformation to instability failure. For the slope with sliding zone, it generally creeps along the sliding zone. If the sliding zone controlling the slope sliding does not have obvious displacement, and the slope has unexpected instability without warning, the harm and potential safety hazard are often much greater than the visible creep. Studying the development trend of this kind of landslide is of great significance to slope treatment and landslide early warning. Taking Xiashan village landslide in Huishan Town, Xinchang County, Zhejiang Province as an example, the landslide point was determined by numerical simulation in 2006. Generally, the landslide is a typical long-term slow deformation towards the free direction. Based on a new round of investigation and monitoring, this paper shows that there are signs of creeping on the surface of the landslide since 2003, and there is no creep on the deep sliding surface. The joint fissures in the landslide area are relatively developed, and rainfall infiltration will soften the soft rock and soil layer and greatly reduce its stability. This paper collects and arranges the rainfall data of the landslide area in recent 30 years, constructs the slope finite element model considering rainfall conditions through ANSYS finite element software, and carries out numerical simulation stability analysis. The results show that if cracks appear below or above the slope’s sliding surface, or are artificially damaged, the sliding surface may develop into weak cracks. Then, the plastic zone of penetration is offset; In the case of heavy rain, the slope can unload itself under the action of rainfall. At this time, the slope was unstable and the landslide happened suddenly.

Sign in / Sign up

Export Citation Format

Share Document