Numerical simulation based on three-dimensional model of inner stereocilia

2017 ◽  
Vol 38 (7) ◽  
pp. 997-1006
Author(s):  
Wenjuan Yao ◽  
Yiqiang Chen
Keyword(s):  
Numerical Simulation ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Simulation Based

scholarly journals Research on Parametric Design of Hydraulic Retarder Based on Multi-Field Coupling of Heat, Fluid and Solid

2015 ◽  
Vol 9 (1) ◽  
pp. 58-64 ◽  
Author(s):  
Kuiyang Wang ◽  
Jinhua Tang ◽  
Guoqing Li
Keyword(s):  
Numerical Simulation ◽  
Parametric Design ◽  
Design Method ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Field Coupling ◽  
Sequential Coupling ◽  
Fluid Coupling ◽  
Hydraulic Retarder

In order to optimize the design method and improve the performance of hydraulic retarder, the numerical simulation of multi-field coupling of heat, fluid and solid is carried out to hydraulic retarder, based on the numerical computation and algorithm of heat-fluid coupling and fluid-solid coupling. The computation models of heat-fluid coupling and fluid-solid coupling of hydraulic retarder are created. The three dimensional model of hydraulic retarder is established based on CATIA software, and the whole flow passage model of hydraulic retarder is extracted on the basis of the three dimensional model established. Based on the CFD calculation and the finite element numerical simulation, the temperature field, stress field, deformation and stress state are analysised to hydraulic retarder in the state of whole filling when the rotate speed is 1600 r/min. In consideration of rotating centrifugal force, thermal stress and air exciting vibration force of blade surface, by using the sequential coupling method, the flow field characteristics of hydraulic retarder and dynamic characteristics of blade structure are analysised and researched based on multi-field coupling of heat, fluid and solid. These provide the theoretical foundation and references for parametric design of hydraulic retarder.

Three-Dimensional Numerical Analysis of Horizontal and Vertical Coalescence of Bubbles at Two Submerged Horizontal Orifices on the Wall

2019 ◽  
Author(s):  
Z. P. Li ◽  
L. Q. Sun ◽  
X. L. Yao ◽  
Y. Piao
Keyword(s):  
Numerical Simulation ◽  
Internal Pressure ◽  
Three Dimensional ◽  
Ventilation Rate ◽  
Smoothing Technique ◽  
Dimensional Model ◽  
Mesh Smoothing ◽  
Three Dimensional Model ◽  
Coalescence Time ◽  
Ventilation Rates

Abstract In the process of bubbling from two submerged adjacent orifices, bubbles coalescence becomes inevitable. But the study of the evolution and interaction of bubbles from submerged orifices is little, especially numerical simulation. In this paper, combined with mesh smoothing technique, mesh subdivision technique and the technique of axisymmetric coalescence and 3D coalescence, a three-dimensional model of bubbles coalescence at two submerged adjacent orifices on the wall is established by the boundary element method. Then, numerical simulations were carried out for horizontal and vertical coalescence before detachment. Finally, by changing the ventilation rate and the Froude number, the effects of different ventilation rates and buoyancy on the process of bubbles coalescence at two adjacent orifices were investigated. The results show that for horizontal coalescence, the effect of ventilation rate is more pronounced than buoyancy. As the ventilation rate increases or the influence of buoyancy is decreased, the amplitude of internal pressure fluctuation of the bubble decreases and the coalescence time decreases. For vertical coalescence, the effect of buoyancy is more pronounced than ventilation rate. With the influence of buoyancy is decreased, the vertical coalescence time is increased, the internal pressure of the bubble is decreased. The influence of ventilation rate is similar to that of horizontal coalescence.

scholarly journals Force-based three-dimensional model predicts mechanical drivers of cell sorting

2019 ◽  
Vol 286 (1895) ◽  
pp. 20182495 ◽  
Author(s):  
Christopher Revell ◽  
Raphael Blumenfeld ◽  
Kevin J. Chalut
Keyword(s):  
Cell Sorting ◽  
Three Dimensional ◽  
Cell Types ◽  
Biological Processes ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Developmental Systems ◽  
Multicellular Aggregates ◽  
Simulation Based ◽  
Inside Out

Many biological processes, including tissue morphogenesis, are driven by cell sorting. However, the primary mechanical drivers of sorting in multicellular aggregates (MCAs) remain controversial, in part because there is no appropriate computational model to probe mechanical interactions between cells. To address this important issue, we developed a three-dimensional, local force-based simulation based on the subcellular element method. In our method, cells are modelled as collections of locally interacting force-bearing elements. We use the method to investigate the effects of tension and cell–cell adhesion on MCA sorting. We predict a minimum level of adhesion to produce inside-out sorting of two cell types, which is in excellent agreement with observations in several developmental systems. We also predict the level of tension asymmetry needed for robust sorting. The generality and flexibility of the method make it applicable to tissue self-organization in a myriad of other biological processes, such as tumorigenesis and embryogenesis.

scholarly journals Numerical Simulation of a Propeller-Type Turbine for In-Pipe Installation

2021 ◽  
Vol 83 (1) ◽  
pp. 1-16
Author(s):  
Oscar Darío Monsalve Cifuentes ◽  
Jonathan Graciano Uribe ◽  
Diego Andrés Hincapié Zuluaga
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Pipe Wall ◽  
Three Dimensional ◽  
Hydraulic Efficiency ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Mesh Independence ◽  
Using Data

In this work, a 76 mm diameter propeller-type turbine is numerically investigated using a parametric study and computational fluid dynamics. The three-dimensional model of the turbine is modeled using data available in the bibliography. A mesh independence study is carried out utilizing a tetrahedron-based mesh with inflation layers around the turbine blade and the pipe wall. The best efficiency point is determined by the maximum hydraulic efficiency of 64.46 %, at a flow rate of 9.72x10-3 m3/s , a head drop of 1.76 m, and a mechanical power of 107.83 W. Additionally, the dimensionless distance y+, pressure, and velocity contours are shown.

Numerical Simulation of Vertical Forced Plume in a Crossflow of Stably Stratified Fluid

1995 ◽  
Vol 117 (4) ◽  
pp. 696-705 ◽  
Author(s):  
Robert R. Hwang ◽  
T. P. Chiang
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Cross Section ◽  
Three Dimensional ◽  
Experimental Measurements ◽  
Secondary Vortex ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Vortex Pairs ◽  
Plume Flows

In this study, an investigation using a three-dimensional numerical model, which treats conservation of mass, momentum, and salinity simultaneously, was carried out to study the character of a vertical forced plume in a uniform cross-stream of stably linear stratified environment. A k-ε turbulence model was used to simulate the turbulent phenomena and close the solving problem. The performance of the three-dimensional model is evaluated by comparison of the numerical results with some available experimental measurements. Results indicate that the numerical computation simulates satisfactorily the plume behavior in a stratified crossflow. The secondary vortex pairs in the cross section induced by the primary one change as the plume flows downstream. This denotes the transformation of entrainment mechanism in stratified crossflow.

Sign in / Sign up

Export Citation Format

Share Document