scholarly journals An algorithm for the anchor points of the PPS of the FRH models

2020 ◽  
Author(s):  
Dariush Akbarian
Keyword(s):  
Decision Making ◽  
Sufficient Conditions ◽  
Data Envelopment ◽  
Proposed Model ◽  
Decision Making Unit ◽  
Production Possibility Set ◽  
Anchor Points ◽  
Definition Of ◽  
Necessary And Sufficient ◽  
Decision Making Units

In this paper we deal with a variant of non-convex data envelopment analysis, called free replication hull model and try to obtain their anchor points. This paper uses a variant of super-efficiency model to characterize all extreme efficient decision making units and anchor points of the free replication hull models. A necessary and sufficient conditions for a decision making unit to be anchor point of the production possibility set of the free replication hull models are stated and proved. Since the set of anchor points is a subset of the set of extreme units, a definition of extreme units and a new method for obtaining these units in non-convex technologies are given. To illustrate the applicability of the proposed model, some numerical examples are finally provided.

scholarly journals A Full Ranking for Decision Making Units Using Ideal and Anti-Ideal Points in DEA

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
A. Barzegarinegad ◽  
G. Jahanshahloo ◽  
M. Rostamy-Malkhalifeh
Keyword(s):  
Decision Making ◽  
Real Data ◽  
The Other ◽  
Data Envelopment ◽  
Production Possibility ◽  
Decision Making Unit ◽  
Common Set Of Weights ◽  
Production Possibility Set ◽  
Ideal Points ◽  
Decision Making Units

We propose a procedure for ranking decision making units in data envelopment analysis, based on ideal and anti-ideal points in the production possibility set. Moreover, a model has been introduced to compute the performance of a decision making unit for these two points through using common set of weights. One of the best privileges of this method is that we can make ranking for all decision making units by solving only three programs, and also solving these programs is not related to numbers of decision making units. One of the other advantages of this procedure is to rank all the extreme and nonextreme efficient decision making units. In other words, the suggested ranking method tends to seek a set of common weights for all units to make them fully ranked. Finally, it was applied for different sets holding real data, and then it can be compared with other procedures.

Some Conditions for Characterizing Anchor Points

2016 ◽  
Vol 33 (02) ◽  
pp. 1650013 ◽  
Author(s):  
Amin Mostafaee ◽  
Majid Soleimani-Damaneh
Keyword(s):  
Returns To Scale ◽  
Sufficient Conditions ◽  
Data Envelopment ◽  
Supporting Hyperplanes ◽  
Dea Models ◽  
Production Possibility Set ◽  
Anchor Points ◽  
Mathematical Programming Problems ◽  
Necessary And Sufficient ◽  
The Given

The set of anchor points is an important subset of the set of extreme efficient points of the production possibility set (PPS) in data envelopment analysis (DEA). In this paper, some new results, under variable returns to scale (VRS) assumption, are given which characterize these points from different points of view. First, we prove two necessary and sufficient conditions leading to geometrical characterizations. Afterwards, four sufficient conditions are given with respect to the level values of the supporting hyperplanes, infeasibility of the super efficiency models, maximum/minimum data, and zero data. Some of the given conditions can be checked without solving any mathematical programming problems. Also, some of them can be tested by solving standard DEA models. The investigated conditions are useful in designing pre-processors and heuristics.

Relative Efficiency of Decision Making Units Producing Both Desirable and Undesirable Outputs: A Case of Textile Processing Units in Pakistan.

2011 ◽  
Vol 50 (4II) ◽  
pp. 685-698
Author(s):  
Samina Khalil
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Relative Efficiency ◽  
Value Added ◽  
Data Envelopment ◽  
Undesirable Outputs ◽  
Textile Processing ◽  
Decision Making Unit ◽  
Desirable And Undesirable Outputs ◽  
Decision Making Units

This paper aims at measuring the relative efficiency of the most polluting industry in terms of water pollution in Pakistan. The textile processing is country‘s leading sub sector in textile manufacturing with regard to value added production, export, employment, and foreign exchange earnings. The data envelopment analysis technique is employed to estimate the relative efficiency of decision making units that uses several inputs to produce desirable and undesirable outputs. The efficiency scores of all manufacturing units exhibit the environmental consciousness of few producers is which may be due to state regulations to control pollution but overall the situation is far from satisfactory. Effective measures and instruments are still needed to check the rising pollution levels in water resources discharged by textile processing industry of the country. JEL classification: L67, Q53 Keywords: Data Envelopment Analysis (DEA), Decision Making Unit (DMU), Relative Efficiency, Undesirable Output

Forecast of the efficiency confidence interval of decision-making units in data envelopment analysis

2020 ◽  
Vol 33 (02) ◽  
pp. 431-445
Author(s):  
Azarnoosh Kafi ◽  
Behrouz Daneshian ◽  
Mohsen Rostamy-Malkhalifeh ◽  
Mohsen Rostamy-Malkhalifeh
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Confidence Interval ◽  
Data Envelopment ◽  
Data Set ◽  
Interval Model ◽  
Time Period ◽  
Proposed Model ◽  
The Future ◽  
Decision Making Units

Data Envelopment Analysis (DEA) is a well-known method for calculating the efficiency of Decision-Making Units (DMUs) based on their inputs and outputs. When the data is known and in the form of an interval in a given time period, this method can calculate the efficiency interval. Unfortunately, DEA is not capable of forecasting and estimating the efficiency confidence interval of the units in the future. This article, proposes a efficiency forecasting algorithm along with 95% confidence interval to generate interval data set for the next time period. What’s more, the manager’s opinion inserts and plays its role in the proposed forecasting model. Equipped with forecasted data set and with respect to data set from previous periods, the efficiency for the future period can be forecasted. This is done by proposing a proposed model and solving it by the confidence interval method. The proposed method is then implemented on the data of an automotive industry and, it is compared with the Monte Carlo simulation methods and the interval model. Using the results, it is shown that the proposed method works better to forecast the efficiency confidence interval. Finally, the efficiency and confidence interval of 95% is calculated for the upcoming period using the proposed model.

An optimistic-pessimistic DEA model based on game cross efficiency approach

2020 ◽  
Vol 54 (4) ◽  
pp. 1215-1230
Author(s):  
Mediha Örkcü ◽  
Volkan Soner Özsoy ◽  
H. Hasan Örkcü
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Equilibrium Solution ◽  
Data Envelopment ◽  
Optimal Weights ◽  
Discriminating Power ◽  
Proposed Model ◽  
Essential Problem ◽  
Decision Making Units ◽  
Selection Of

The ranking of the decision making units (DMUs) is an essential problem in data envelopment analysis (DEA). Numerous approaches have been proposed for fully ranking of units. Majority of these methods consider DMUs with optimistic approach, whereas their weaknesses are ignored. In this study, for fully ranking of the units, a modified optimistic–pessimistic approach, which is based on game cross efficiency idea is proposed. The proposed game like iterative optimistic-pessimistic DEA procedure calculates the efficiency scores according to weaknesses and strengths of units and is based on non-cooperative game. This study extends the optimistic-pessimistic DEA approach to obtain robust rank values for DMUs. The proposed approach yields Nash equilibrium solution, thus overcomes the problem of non-uniqueness of the DEA optimal weights that can possibly reduce the usefulness of cross efficiency. Finally, in order to verify the validity of the proposed model and to show the practicability of algorithm, we apply a real-world example for selection of industrial R&D projects. The proposed model can increase the discriminating power of DMUs and can fully rank the DMUs.

scholarly journals Global malmquist index for measuring the economic productivity changes

2020 ◽  
Vol 53 (7-8) ◽  
pp. 1278-1285
Author(s):  
Esmaeil Mombini ◽  
Mohsen Rostamy-Malkhalifeh ◽  
Mansor Saraj ◽  
Mohsen Zahraei ◽  
Reza Tayebi Khorami
Keyword(s):  
Decision Making ◽  
Malmquist Index ◽  
Productivity Index ◽  
Programming Models ◽  
Data Envelopment ◽  
Decision Unit ◽  
Economic Productivity ◽  
Use Of Resources ◽  
Decision Making Unit ◽  
Decision Making Units

Data envelopment analysis is a nonparametric method for measuring of the performance of decision-making units—which do not need to have or compute a firm’s production function, which is often difficult to calculate. For any manager, the progress or setback of the thing they manage is important because it makes planning and adoption of future policies for the organization or decision-making unit more rational and scientific. Different methods have been used to calculate the improvements and regressions using Malmquist Index. In this article, we evaluate the units under review in terms of economic efficiency, and the units in terms of spending, production, revenue and profit over several periods, and the rate of improvement or regression of each of these units. Considering the minimal use of resources and consuming less money, generating more revenue, and maximizing profits, the improvement or retreat of the recipient’s decision unit in terms of cost, revenue, and profit was examined by presenting a method based on solving linear programming models using the productivity index is Malmquist and Malmquist Global. Finally, by designing and solving a numerical example, we emphasize and test the applicability of the material presented in this article.

Comparing Data Envelopment Analysis and Human Decision Making Unit Rankings: A Survey Approach

2014 ◽  
Vol 29 (2) ◽  
Author(s):  
Stanko Dimitrov
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Decision Makers ◽  
Data Envelopment ◽  
Rank Ordering ◽  
Decision Making Unit ◽  
Human Decision ◽  
Survey Approach ◽  
Decision Making Units ◽  
Better Than

AbstractIn this paper we compare the ordinal rankings generated through Data Envelopment Analysis (DEA) methods to ordinal rankings generated by human decision makers. Through eliciting the total rank ordering for approximately 100 individuals on all of the four different datasets of Decision Making Units (DMUs), we compare the rankings generated by individuals to those generated by ten DEA methods. We observe that depending on the characteristics of the dataset one of the DEA methods performs better than the others in matching human decision makers.

scholarly journals Directional Slack-Based Measure for the Inverse Data Envelopment Analysis

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Ali Mirsalehy ◽  
Mohd Rizam Abu Bakar ◽  
Lai Soon Lee ◽  
Azmi B. Jaafar ◽  
Maryam Heydar
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Efficiency Score ◽  
Data Envelopment ◽  
New Production ◽  
Production Possibility ◽  
Novel Technique ◽  
Decision Making Unit ◽  
Measure Model ◽  
Production Possibility Set

A novel technique has been introduced in this research which lends its basis to the Directional Slack-Based Measure for the inverse Data Envelopment Analysis. In practice, the current research endeavors to elucidate the inverse directional slack-based measure model within a new production possibility set. On one occasion, there is a modification imposed on the output (input) quantities of an efficient decision making unit. In detail, the efficient decision making unit in this method was omitted from the present production possibility set but substituted by the considered efficient decision making unit while its input and output quantities were subsequently modified. The efficiency score of the entire DMUs will be retained in this approach. Also, there would be an improvement in the efficiency score. The proposed approach was investigated in this study with reference to a resource allocation problem. It is possible to simultaneously consider any upsurges (declines) of certain outputs associated with the efficient decision making unit. The significance of the represented model is accentuated by presenting numerical examples.

Use Shapley value for increasing power distinguish of data envelopment analysis model: An application for estimating environmental efficiency of industrial producers in Iran

2019 ◽  
Vol 31 (4) ◽  
pp. 656-675
Author(s):  
Hashem Omrani ◽  
Mohaddeseh Amini ◽  
Mahdieh Babaei ◽  
Khatereh Shafaat
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Shapley Value ◽  
Environmental Efficiency ◽  
Data Envelopment Analysis Model ◽  
Game Model ◽  
Data Envelopment ◽  
Analysis Model ◽  
Proposed Model ◽  
Decision Making Units

Data envelopment analysis is a linear programming model for estimating the efficiency of decision making units (DMUs). Data envelopment analysis model has two major advantages: it does not need the explicit form of production function for estimating the efficiency scores of decision making units and also, it allows decision making units to choose the weights of inputs and outputs to reach the estimated efficient frontier. In several cases, the distinguish power of data envelopment analysis model is weak and it is unable to rank decision making units, entirely. The goal of this study is to provide a better methodology to fully rank all the decision making units. First, the efficiency scores of all decision making units are generated using the cross-efficiency data envelopment analysis model and then, the cooperative game theory approach is applied to produce a fully fair ranking of decision making units. The DEA-Game model calculates the Shapley value for each coalition of decision making units and the final ranking is relied on common weights. These fair common weights are found using the Shapley value to rank decision making units, completely. To illustrate the capability of the proposed model, the industrial producers in the provinces of Iran are evaluated. First, the suitable indicators are defined and then, the actual environmental data for year 2013 is gathered. Finally, the proposed model is applied to fully rank the industrial producers in provinces of Iran from environmental perspective. The results show that the DEA-Game model can rank provinces, entirely. Based on the results, the industrial producers in big provinces such as Tehran, Fars and Yazd have undesirable performance in environmental efficiency.

New Models for Computing the Distance of DMUs to the Weak Efficient Boundary of Convex and Nonconvex PPSs in DEA

2017 ◽  
Vol 34 (06) ◽  
pp. 1750035
Author(s):  
J. Vakili
Keyword(s):  
Decision Making ◽  
Data Envelopment Analysis ◽  
Data Envelopment ◽  
Production Possibility ◽  
New Models ◽  
Production Possibility Set ◽  
Decision Making Units

In data envelopment analysis (DEA), calculating the distances of decision making units (DMUs) from the weak efficient boundary of a production possibility set (PPS) is a very important subject which has attracted increasing interest of researchers in recent years. The distances of DMUs to the weak efficient boundary of the PPS can be used to evaluate the performance of DMUs, obtain the closest efficient patterns and also assess the sensitivity and stability of efficiency classifications in DEA. The present study proposes some new models which compute the distances of DMUs from the weak efficient boundary of a PPS for both convex and nonconvex PPSs using Hölder norms. In fact, the presented models assist a DMU to improve its performance by an appropriate movement towards the weak efficient boundary.

Sign in / Sign up

Export Citation Format

Share Document