Research on Stress Spectrum of Steel Decks in Suspension Bridge Considering Measured Traffic Flow

2012 ◽  
Vol 26 (1) ◽  
pp. 65-75 ◽  
Author(s):  
Bohai Ji ◽  
Dong-hua Chen ◽  
Lin Ma ◽  
Zhu-sheng Jiang ◽  
Guo-gang Shi ◽  
...  
2007 ◽  
Vol 348-349 ◽  
pp. 341-344 ◽  
Author(s):  
Tong Guo ◽  
Ai Qun Li ◽  
Zhao Xia Li

Fatigue life assessment of critical bridge members using online monitoring data has been investigated in recent years. To make a quick and efficient evaluation, a representative block of strain cycles is usually defined. However, such block sometimes fails to cover the change in fatigue damage by temperature fluctuation and traffic growth, which is important to the life prediction of the welds in a long-span suspension bridge. To find the influence of temperature and traffic volume on the fatigue damage, an equivalent vehicle load method is dedicated through finite element analysis, and the statistical disposition of traffic flow has been conducted, using data from the Runyang Bridge. The influence of traffic growth can be estimated and eliminated from the total damage so that the temperature effect on the fatigue damage is finally obtained. It is found that temperature has a linear effect on the fatigue damage. According to the fitted relationship between fatigue damage, temperature and the traffic flow, a more objective fatigue assessment is undertaken, based on the rain-flow counting method and the Palgren-Miner rule.


2020 ◽  
Vol 2020 ◽  
pp. 1-19
Author(s):  
Yue Zhao ◽  
Pingming Huang ◽  
Guanxu Long ◽  
Yangguang Yuan ◽  
Yamin Sun

Fluid viscous dampers (FVDs) are widely used in long-span suspension bridges for earthquake resistance. To analyze efficiently the influences of FVDs on the dynamic response of a suspension bridge under high-intensity traffic flow, a bridge-vehicle coupling method optimized by isoparametric mapping and improved binary search in this work was first developed and validated. Afterwards, the traffic flow was simulated on the basis of monitored weigh-in-motion data. The dynamic responses of bridge were analyzed by the proposed method under different FVD parameters. Results showed that FVDs could positively affect bridge dynamic response under traffic flow. The maximum accumulative longitudinal girder displacement, longitudinal girder displacement, and longitudinal pylon acceleration decreased substantially, whereas the midspan girder bending moment, pylon bending moment, longitudinal pylon displacement, and suspender force were less affected. The control efficiency of maximum longitudinal girder displacement and accumulative girder displacement reached 33.67% and 57.71%, longitudinal pylon acceleration and girder bending moment reached 31.51% and 7.14%, and the pylon longitudinal displacement, pylon bending moment, and suspender force were less than 3%. The increased damping coefficient and decreased velocity exponent can reduce the bridge dynamic response. However, when the velocity exponent was 0.1, an excessive damping coefficient brought little improvement and may lead to high-intensity work under traffic flow, which will adversely affect component durability. The benefits of low velocity exponent also reduced when the damping coefficient was high enough, so if the velocity exponent has to be increased, the damping coefficient can be enlarged to fit with the velocity exponent. The installation of FVDs influences dynamic responses of bridge structures in daily operations and this issue warrants investigation. Thus, traffic load should be considered in FVD design because structural responses are perceptibly influenced by FVD parameters.


ICCTP 2009 ◽  
2009 ◽  
Author(s):  
Jianjun Wang ◽  
Chenfeng Xie ◽  
Zhenwen Chang ◽  
Jingjing Zhang

CICTP 2020 ◽  
2020 ◽  
Author(s):  
Lidong Zhang ◽  
Wenxing Zhu ◽  
Mengmeng Zhang ◽  
Cuijiao Chen

CICTP 2020 ◽  
2020 ◽  
Author(s):  
Bo Wang ◽  
Haixiao Wang ◽  
Ke Ji ◽  
Qi Mi

Sign in / Sign up

Export Citation Format

Share Document