Improving the Seismic Performance of Buried Gas Pipelines Subjected to Near-Fault Earthquakes using Friction Dampers

ICPTT 2013 ◽  
2013 ◽  
Author(s):  
S. K. Sadat Shokouhi
Keyword(s):  
Seismic Performance ◽  
Gas Pipelines ◽  
Friction Dampers ◽  
Near Fault ◽  
Near Fault Earthquakes

scholarly journals Seismic Performance Evaluation of Building-Damper System under Near-Fault Earthquake

2020 ◽  
Vol 2020 ◽  
pp. 1-21 ◽  
Author(s):  
Xiaoli Wu ◽  
Wei Guo ◽  
Ping Hu ◽  
Dan Bu ◽  
Xu Xie ◽  
...  
Keyword(s):  
Seismic Performance ◽  
Structural Damage ◽  
Pulse Velocity ◽  
Friction Damper ◽  
Pulse Period ◽  
Earthquake Excitation ◽  
Seismic Code ◽  
Velocity Amplitude ◽  
Near Fault ◽  
Near Fault Earthquakes

The building-damper system designed by a seismic code is usually considered to be able to withstand the attack of strong earthquakes. However, near-fault earthquakes, especially those with the forward-directivity effect, might cause early and unexpected failure of code-designed dampers and consequent severe structural damage. In this paper, by taking into account near-fault earthquakes, seismic performance of the building-damper system and damper failure’s influence are evaluated systematically. A 9-storey steel building is designed by the Chinese seismic code as the benchmark model, and five typical dampers, including buckling-restrained brace damper (BRB), friction damper (FD), self-centering damper (SCD), viscous damper (VD), and viscoelastic damper (VED), are adopted. It was found that the building-damper systems show a large response and possible damper failure under the near-fault earthquake excitations. Then, the influence of damper failure is investigated, which reveals that damper failure would significantly affect seismic performance of the building-damper system, especially for the building-SCD system. Subsequently, by introducing the artificial near-fault earthquake excitation, the influences of different pulse parameters, such as pulse velocity amplitude, pulse period, and the number of significant pulses, are studied. It shows that the pulse velocity amplitude and pulse period obviously affect the seismic performance, while the number of significant pulses presents little influence.

Base Isolation Systems Employing Variable Friction Dampers Based on a STFT Controller

2011 ◽  
Vol 90-93 ◽  
pp. 1566-1575
Author(s):  
Zi Shu Dai
Keyword(s):  
Base Isolation ◽  
Isolation System ◽  
Friction Dampers ◽  
Near Fault ◽  
Active Isolation ◽  
Variable Friction ◽  
Isolation Systems ◽  
Near Fault Earthquakes ◽  
Rubber Bearings ◽  
Short Time

Conventional isolation systems may induce an excessive response in near-fault earthquakes. A new short time Fourier transformation (STFT) control algorithm for variable friction dampers (VFD) is developed to improve the performance of base isolation buildings in near-fault earthquakes. The STFT controller varies the clamping force in the VFD damper to achieve the response reduction. In addition, the STFT algorithm is implemented analytically on a multi degree of freedom system (MDOF) with laminated rubber bearings and variable friction dampers in Simulink environment. Three types of earthquakes representing a wide variety of ground motions are considered as the ground excitations in the simulation. The numerical show that, compared with conventional isolation systems, the semi-active isolation system controlled by the STFT algorithm can reduce the excessive response in near-fault earthquakes effectively.

scholarly journals Seismic Performance of Steel Structure-Foundation Systems Designed According to Eurocode 8 Provisions: The Case of Near-Fault Seismic Motions

Buildings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 63 ◽  
Author(s):  
Panagiota Katsimpini ◽  
Foteini Konstandakopoulou ◽  
George Papagiannopoulos ◽  
Nikos Pnevmatikos ◽  
George Hatzigeorgiou
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Steel Structure ◽  
Steel Structures ◽  
Eurocode 8 ◽  
Near Fault ◽  
Building Foundation ◽  
Steel Building ◽  
Near Fault Earthquakes ◽  
Nonlinear Time History

The seismic performance of steel structure-foundation systems subjected to near-fault earthquakes was assessed on the basis of response results from nonlinear time-history seismic analyses. The structural results included the maximum values for residual interstory drift ratios, base shears, and overturning moments of the steel structures, as well as the maximum values for residual settlement and tilting of the foundations. In order to reveal the influence of soil-building-interaction on the aforementioned response results, the steel building-foundation systems were designed according to Eurocode 8 provisions, assuming initially fixed and then compliant base conditions. It was concluded that for the case of near-fault seismic motions, good seismic performance of steel building-foundation hybrid systems designed according to European Codes was not guaranteed. A particular thing to note for these systems under near-fault seismic motions was that the seismic performance of the steel structure was most likely unacceptable, while one of the foundations was always acceptable.

scholarly journals Influence of Elastomeric Bearings in Tension on the Seismic Performance of Base-Isolated r.c. Buildings

2020 ◽  
Vol 11 (1) ◽  
pp. 82
Author(s):  
Fabio Mazza ◽  
Mirko Mazza
Keyword(s):  
Base Isolation ◽  
Nonlinear Models ◽  
Vertical Component ◽  
Computer Code ◽  
Nonlinear Phenomena ◽  
Isolation System ◽  
Elastomeric Bearings ◽  
Near Fault ◽  
Base Isolation System ◽  
Near Fault Earthquakes

Elastomeric bearings are commonly used in base-isolation systems to protect the structures from earthquake damages. Their design is usually developed by using nonlinear models where only the effects of shear and compressive loads are considered, but uncertainties still remain about consequences of the tensile loads produced by severe earthquakes like the near-fault ones. The present work aims to highlight the relapses of tension on the response of bearings and superstructure. To this end, three-, seven- and ten-storey r.c. framed buildings are designed in line with the current Italian seismic code, with a base-isolation system constituted of High-Damping-Rubber Bearings (HDRBs) designed for three values of the ratio between the vertical and horizontal stiffnesses. Experimental and analytical results available in literature are used to propose a unified nonlinear model of the HDRBs, including cavitation and post-cavitation of the elastomer. Nonlinear incremental dynamic analyses of the test structures are carried out using a homemade computer code, where other models of HDRBs considering only some nonlinear phenomena are implemented. Near-fault earthquakes with comparable horizontal and vertical components, prevailing horizontal component and prevailing vertical component are considered as seismic input. Numerical results highlight that a precautionary estimation of response parameters of the HDRBs is attained referring to the proposed model, while its effects on the nonlinear response of the superstructure are less conservative.

Sign in / Sign up

Export Citation Format

Share Document