Non-Equilibrium Distributions and Heat Transfer Near a Catalytic Surface of Re-Entering Bodies

2003 ◽  
Author(s):  
E. V. Kustova
2013 ◽  
Vol 13 (5) ◽  
pp. 1330-1356 ◽  
Author(s):  
G. H. Tang ◽  
G. X. Zhai ◽  
W. Q. Tao ◽  
X. J. Gu ◽  
D. R. Emerson

AbstractGases in microfluidic structures or devices are often in a non-equilibrium state. The conventional thermodynamic models for fluids and heat transfer break down and the Navier-Stokes-Fourier equations are no longer accurate or valid. In this paper, the extended thermodynamic approach is employed to study the rarefied gas flow in microstructures, including the heat transfer between a parallel channel andpressure-driven Poiseuille flows through a parallel microchannel andcircular microtube. The gas flow characteristics are studied and it is shown that the heat transfer in the non-equilibrium state no longer obeys the Fourier gradient transport law. In addition, the bimodal distribution of streamwise and spanwise velocity and temperature through a long circular microtube is captured for the first time.


2021 ◽  
Author(s):  
Ramesh Kudenatti ◽  
Sandhya L

Abstract This work examines the steady two-dimensional mixed convection boundary layer flow of non-Newtonian Carreau fluid embedded in a porous medium. The impermeable wedge is at rest over which the momentum and thermal boundary layers form due to motion of Carreau fluid with a large Reynolds number. We consider local thermal non-equilibrium for which the temperature of the solid porous medium is different from that of fluid phase, and hence, a single heat-transport equation is replaced by a two-temperature model. The governed equations for flow and heat transfer are converted into a system of ordinary differential equations using a similarity approach. It is observed that local thermal non-equilibrium effects are dominant for small interphase heat transfer rate and porosity scaled conductivity parameters. It is shown that the temperature at any location of the solid porous medium is always higher than that of fluid phase. When these parameters are increased gradually the local thermal equilibrium phase is recovered at which the temperatures of the fluid and solid are identical at each pore. Similar trend is noticed for both shear-thinning and shear-thickening fluids. The results further show that heat exchange between the fluid and solid porous medium is similar to both assisted and opposed flows and Carreau fluid. The velocity and temperature fields for the various increasing fluid index, Grashof number and permeability show that the thickness of the momentum and thermal boundary layer is thinner.


Author(s):  
Mikhail A. Sheremet ◽  
Ioan Pop ◽  
A. Cihat Baytas

Purpose This study aims to numerically analyze natural convection of alumina-water nanofluid in a differentially-heated square cavity partially filled with a heat-generating porous medium. A single-phase nanofluid model with experimental correlations for the nanofluid viscosity and thermal conductivity has been considered for the description of the nanoparticles transport effect in the present study. Local thermal non-equilibrium approach for the porous layer with the Brinkman-extended Darcy model has been used. Design/methodology/approach Dimensionless governing equations formulated using stream function, vorticity and temperature have been solved by the finite difference method. The effects of the Rayleigh number, Ostrogradsky number, Nield number and nanoparticles volume fraction on nanofluid flow, heat and mass transfer have been analyzed. Findings It has been revealed that the dimensionless heat transfer coefficient at the fluid/solid matrix interface can be a very good control parameter for the convective flow and heat transfer intensity. The present results are original and new for the study of non-equilibrium natural convection in a differentially-heated nanofluid cavity partially filled with a porous medium. Originality/value The results of this paper are new and original with many practical applications of nanofluids in the modern industry.


Sign in / Sign up

Export Citation Format

Share Document