Short-circuit photocurrent in epitaxial lead zirconate-titanate thin films

2007 ◽  
Vol 101 (6) ◽  
pp. 064109 ◽  
Author(s):  
L. Pintilie ◽  
I. Vrejoiu ◽  
G. Le Rhun ◽  
M. Alexe
2004 ◽  
Vol 830 ◽  
Author(s):  
Hiroshi Nakaki ◽  
Hiroshi Uchida ◽  
Shoji Okamoto ◽  
Shintaro Yokoyama ◽  
Hiroshi Funakubo ◽  
...  

ABSTRACTRare-earth-substituted tetragonal lead zirconate titanate thin films were synthesized for improving the ferroelectric property of conventional lead zirconate titanate. Thin films of Pb1.00REx (Zr0.40Ti0.60)1-(3x /4)O3 (x = 0.02, RE = Y, Dy, Er and Yb) were deposited on (111)Pt/Ti/SiO2/(100)Si substrates by a chemical solution deposition (CSD). B-site substitution using rare-earth cations described above enhanced the crystal anisotropy, i.e., ratio of PZT lattice parameters c/a. Remanent polarization (Pr) of PZT film was enhanced by Y3+-, Dy3+- and Er3+-substitution from 20 μC/cm2 up to 26, 25 and 26 μC/cm2 respectively, while ion substitution using Yb3+ degraded the Pr value down to 16 μC/cm2. These films had similar coercive fields (Ec) of around 100 kV/cm. Improving the ferroelectric property of PZT film by rare-earth-substitution would be ascribed to the enhancement of the crystal anisotropy. We concluded that ion substitution using some rare-earth cations, such as Y3+, Dy3+ or Er3+, is one of promising technique for improving the ferroelectric property of PZT film.


2003 ◽  
Vol 15 (5) ◽  
pp. 1147-1155 ◽  
Author(s):  
A. Wu ◽  
P. M. Vilarinho ◽  
I. Reaney ◽  
I. M. Miranda Salvado

1994 ◽  
Vol 17 (6) ◽  
pp. 1005-1014 ◽  
Author(s):  
S B Majumder ◽  
V N Kulkarni ◽  
Y N Mohapatra ◽  
D C Agrawal

2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
M. Waegner ◽  
A. Finn ◽  
G. Suchaneck ◽  
G. Gerlach ◽  
L. M. Eng

We describe the fabrication of lead zirconate titanate (PZT) nanodisc arrays isolated by a polymer layer and contacted with a top electrode. PZT thin films were deposited by multitarget sputtering onto a platinum/titanium bottom electrode and structured by means of nanosphere lithography. To guarantee short-circuit-free deposition of a top electrode, the space between the nanostructures was filled by a polymer. Two approaches for the filling are demonstrated: (a) imprinting and (b) skim coating. Single nanodiscs embedded in a flexible polymer matrix have two major advantages. First, taking into account the flexibility of the matrix, they can vibrate in lateral direction and, second, due to shrinking to the nanoscale, predominant directions of the polarization form, such as vortex- or bubble-like domain patterns. Piezoresponse force microscopy was performed on patterned and nonpatterned samples with and without a top electrode to check the local piezoresponse. Comparison of the different samples revealed an increase in lateral piezoactivity for patterned samples with Ni/Cr electrode while the out-of-plane piezoresponse remained constant. Gold electrodes limit the piezoresponse in both measured directions.


1991 ◽  
Vol 74 (6) ◽  
pp. 1455-1458 ◽  
Author(s):  
Altaf H. Carim ◽  
Bruce A. Tuttle ◽  
Daniel H. Doughty ◽  
Sheri L. Martinez

Sign in / Sign up

Export Citation Format

Share Document