large thickness
Recently Published Documents


TOTAL DOCUMENTS

99
(FIVE YEARS 35)

H-INDEX

11
(FIVE YEARS 2)

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Mulugeta Markos ◽  
Abel Saka ◽  
Leta Tesfaye Jule ◽  
N. Nagaprasad ◽  
Krishnaraj Ramaswamy

Vertical electrical sounding and magnetic methods were carried out to assess groundwater potential in Adilo catchment, Kembata Tembaro Zone, South Nations, Nationalities and Peoples Regional Government, Main Ethiopian Rift. The data were acquired from eight VES points using Schlumberger electrode arrays with maximum half current electrode spacing ( AB / 2 = 500 ) and 253 magnetic data points were analyzed. The qualitative analysis of VES data was accomplished by using curves, apparent resistivity, and pseudodepths, and the quantitative interpretations of the VES data were constructed by the VES data using IPI-Res3, IPI2Win, and surfer software and constructing geoelectric section along with profiles and lithological information from the borehole and Geosoft interpretation was used for magnetic data. The VES results of the data revealed five geoelectric layers which differ in degree of fracturing, weathering, and formation. The upward continued magnetic field map anomaly to 560 m illustrated northwestern to the southwest; areas have a low magnetic anomaly. Examining the potential aquifer of profile one’s geoelectric section, the horizons of layer four were better potential aquifers as the highly fractured and weathered ignimbrite zone of layer five of VES13 was 219 m deeper than the depths of the other VES points, and along with profile two geoelectric sections, the horizon of layer four VES23 layer five has the lowest resistivity with large thickness at a depth of 253 m. Thus, the low resistivity and the large thickness of these formations are an indication of the high yield of groundwater potential in the study area.


Author(s):  
Y. P. Besschaposchnikov ◽  
M. S. Pushkin ◽  
A. V. Inozemtsev ◽  
A. M. Patselov

The practical possibility of obtaining by explosive welding at one time of large plate aluminum with steel with a joint strength of more than 100 MPa is shown.


2021 ◽  
Vol 141 ◽  
pp. 107140
Author(s):  
Yaowen Wu ◽  
Guangyi Zhang ◽  
Jianxin Wang ◽  
Yang Chao ◽  
Wenwu Zhang

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1184
Author(s):  
Maria Asuncion Valiente Bermejo ◽  
Daniel Eyzop ◽  
Kjell Hurtig ◽  
Leif Karlsson

In this study, Submerged Arc Welding (SAW) and Gas Metal Arc Welding (GMAW) processes were used in multi-pass welding of 33 mm thickness super duplex stainless steel plates. Recommended and higher than recommended arc energy and interpass temperatures were used. Both GMAW and SAW processes were able to produce large thickness weldments meeting the microstructural, mechanical, and corrosion resistance requirements, and also when using higher than recommended arc energy and interpass temperature. It was possible to reduce the number of welding passes by half when using higher than recommended arc energy and interpass temperature. The SAW process needed only half of the welding time required for the GMAW process to produce a weldment with nearly the same number of weld passes, when using recommended arc energy and interpass temperature. Based on the results of this investigation, the practical recommendations for welding large thicknesses should be revised and updated.


Sign in / Sign up

Export Citation Format

Share Document