A blade pitching approach for vertical axis wind turbines based on the free vortex method

2019 ◽  
Vol 11 (5) ◽  
pp. 053301
Author(s):  
Zhenzhou Zhao ◽  
Decheng Su ◽  
Tongguang Wang ◽  
Bofeng Xu ◽  
Hao Wu ◽  
...  
Keyword(s):  
Wind Turbines ◽  
Vortex Method ◽  
Vertical Axis ◽  
Free Vortex ◽  
Vertical Axis Wind Turbines

An Unsteady Aerodynamics Model for Lifting Line Free Vortex Wake Simulations of HAWT and VAWT in QBlade

2016 ◽  
Author(s):  
Juliane Wendler ◽  
David Marten ◽  
George Pechlivanoglou ◽  
Christian Navid Nayeri ◽  
Christian Oliver Paschereit
Keyword(s):  
Wind Turbines ◽  
Turbine Blades ◽  
Unsteady Aerodynamics ◽  
Vortex Method ◽  
Vertical Axis ◽  
Empirical Method ◽  
Vortex Wake ◽  
Simulation Code ◽  
Free Vortex ◽  
Lifting Line

This paper describes the introduction of an unsteady aerodynamics model applicable for horizontal and vertical axis wind turbines (HAWT/VAWT) into the advanced blade design and simulation code QBlade, developed at the HFI of the TU Berlin. The software contains a module based on lifting line theory including a free vortex wake algorithm (LLFVW) which has recently been coupled to the structural solver of FAST to allow for time-resolved aeroelastic simulations of large, flexible wind turbine blades. The aerodynamic model yields an accuracy improvement with respect to Blade Element Momentum (BEM) theory and a more practical approach compared to higher fidelity methods such as Computational Fluid Dynamics (CFD) which are too computationally demanding for load case calculations. To capture the dynamics of flow separation, a semi-empirical method based on the Beddoes-Leishman model now extends the simple table lookups of static polar data by predicting the unsteady lift and drag coefficients from steady data and the current state of motion. The model modifications for wind turbines and the coupling to QBlade’s vortex method are described. A 2D validation of the implementation is presented in this paper to demonstrate the capability and reliability of the resulting simulation scheme. The applicability of the model is shown for exemplary HAWT and VAWT test cases. The modelling of the dynamic stall vortex, the empiric model constants as well as the influence of the dynamic coefficients on performance predictions are investigated.

An Unsteady Prescribed Wake Model for Vertical Axis Wind Turbines

1994 ◽  
Vol 208 (1) ◽  
pp. 13-20 ◽  
Author(s):  
F N Coton ◽  
D Jiang ◽  
R A McD Galbraith
Keyword(s):  
Wind Turbines ◽  
Performance Prediction ◽  
Three Dimensional ◽  
Vortex Method ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Prediction Scheme ◽  
Wake Model ◽  
New Formulation

This paper describes the development of a fully unsteady three-dimensional aerodynamic performance prediction scheme for vertical axis wind turbines (VAWTs). The method is based on the prescribed wake approach of Basuno in which the turbine is represented by a series of bound vortex segments from which emanates a wake consisting of shed and trailing vorticity filaments. Unlike a free vortex method, these wake filaments are constrained to follow a predetermined path, the shape of which is dictated by momentum considerations. By coupling this technique with the unsteady aerofoil performance method of Leishman and Beddoes, a fully unsteady V AWT model is developed. The difficulties associated with coupling the two techniques are discussed and a new formulation for the tangential blade force is introduced. The resulting calculation scheme is shown to agree well with field data from a straight bladed vertical axis wind turbine, even at very low tip speed ratios.

scholarly journals Numerical Analysis of the Dynamic Interaction between Two Closely Spaced Vertical-Axis Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2286
Author(s):  
Yutaka Hara ◽  
Yoshifumi Jodai ◽  
Tomoyuki Okinaga ◽  
Masaru Furukawa
Keyword(s):  
Wind Turbines ◽  
Power Distribution ◽  
Phase Synchronization ◽  
Average Power ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Mean Power ◽  
Vertical Axis Wind Turbines ◽  
Fluid Body ◽  
First Time

To investigate the optimum layouts of small vertical-axis wind turbines, a two-dimensional analysis of dynamic fluid body interaction is performed via computational fluid dynamics for a rotor pair in various configurations. The rotational speed of each turbine rotor (diameter: D = 50 mm) varies based on the equation of motion. First, the dependence of rotor performance on the gap distance (gap) between two rotors is investigated. For parallel layouts, counter-down (CD) layouts with blades moving downwind in the gap region yield a higher mean power than counter-up (CU) layouts with blades moving upwind in the gap region. CD layouts with gap/D = 0.5–1.0 yield a maximum average power that is 23% higher than that of an isolated single rotor. Assuming isotropic bidirectional wind speed, co-rotating (CO) layouts with the same rotational direction are superior to the combination of CD and CU layouts regardless of the gap distance. For tandem layouts, the inverse-rotation (IR) configuration shows an earlier wake recovery than the CO configuration. For 16-wind-direction layouts, both the IR and CO configurations indicate similar power distribution at gap/D = 2.0. For the first time, this study demonstrates the phase synchronization of two rotors via numerical simulation.

Optimal Placement of Horizontal- and Vertical-Axis Wind Turbines in a Wind Farm for Maximum Power Generation Using a Genetic Algorithm

2011 ◽  
Author(s):  
Xiaomin Chen ◽  
Ramesh Agarwal
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbines ◽  
Wind Farm ◽  
Optimization Problem ◽  
Vertical Axis ◽  
Optimal Placement ◽  
Vertical Axis Wind Turbines ◽  
Wake Effects ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model

In this paper, we consider the Wind Farm layout optimization problem using a genetic algorithm. Both the Horizontal–Axis Wind Turbines (HAWT) and Vertical-Axis Wind Turbines (VAWT) are considered. The goal of the optimization problem is to optimally place the turbines within the wind farm such that the wake effects are minimized and the power production is maximized. The reasonably accurate modeling of the turbine wake is critical in determination of the optimal layout of the turbines and the power generated. For HAWT, two wake models are considered; both are found to give similar answers. For VAWT, a very simple wake model is employed.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

Sign in / Sign up

Export Citation Format

Share Document