Portable optical biosensors for the determination of biologically active and toxic compounds

2004 ◽  
Vol 47 (6) ◽  
pp. 630-633 ◽  
Author(s):  
Oleg N Kompanets
Keyword(s):  
Biologically Active ◽  
Optical Biosensors ◽  
Toxic Compounds

Fast Method for the Determination of Residual Solvents in Radiopharmaceutical Products

2017 ◽  
Vol 68 (4) ◽  
pp. 666-670 ◽  
Author(s):  
Mirela Mihon ◽  
Catalin Stelian Tuta ◽  
Alina Catrinel Ion ◽  
Dana Niculae ◽  
Vasile Lavric
Keyword(s):  
Gas Chromatography ◽  
Control Method ◽  
Limit Of Detection ◽  
The Body ◽  
Biologically Active ◽  
Injection Technique ◽  
Fast Method ◽  
Residual Solvent ◽  
Residual Solvents

The aim of this work was the development and validation of a fast analytical method to determine the residual solvents content in radiopharmaceuticals such as: 18F-Fluorodeoxyglucose (18F-FDG), 18F-Fluoroestradiol (18F-FES), 18F-Fluorothymidine (18F-FLT),18F-Fluoromisonidazole (18F-FMISO). Radiopharmaceuticals are radioactive preparations for medical purposes used in nuclear medicine as tracers in diagnostic imaging and treatment of certain diseases. Positron Emission Tomography (PET) is a medical imaging technique that consists in introducing into the body of a small amount of a biologically active chemical compound labelled with a short lived positron-emitting radioisotope (18F, 11C, 68Ga). Residual solvents are critical impurities in radiopharmaceuticals that can affect labelling, stability and physicochemical properties of drugs. Therefore, the determination of these solvents is essential for quality control of radiopharmaceuticals. Validation of the control method for residual solvents by gas chromatography is referred by the European Pharmacopoeia using a special injection technique (head space). The parameters of the method, which comply with International Conference on Harmonization guidelines, are: accuracy, precision, linearity, limit of detection, limit of quantification and robustness. The proposed method (direct gas chromatography injection) proved to be linear, precise, accurate and robust. Good linearity was achieved for all the solvents and correlation coefficients (R2) for each residual solvent were found more than 0.99.

scholarly journals An Improved Methodology for Determination of Fluorine in Biological Samples Using High-Resolution Molecular Absorption Spectrometry via Gallium Fluorine Formation in a Graphite Furnace

2021 ◽  
Vol 11 (12) ◽  
pp. 5493
Author(s):  
Andrzej Gawor ◽  
Andrii Tupys ◽  
Anna Ruszczyńska ◽  
Ewa Bulska
Keyword(s):  
High Resolution ◽  
Limit Of Detection ◽  
Graphite Furnace ◽  
Absorption Spectrometry ◽  
Biological Tissues ◽  
Biologically Active ◽  
Molecular Absorption ◽  
Biological Origin ◽  
Molecular Absorption Spectrometry

Nowadays growing attention is paid to the control of fluorine content in samples of biological origin as it is present in the form of various biologically active organic compounds. Due to the chemically-rich matrix of biological tissues, the determination of fluorine becomes a very difficult task. Furthermore, a required complex sample preparation procedure makes the determination of the low contents of F by ion chromatography UV-Vis or ion-selective electrodes not possible. High-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS GF MAS) seems to be the best option for this purpose due to its high robustness to matrix interferences, especially in the presence of carefully selected modifiers. In this work the possibility of quantitative F determination in water and animal tissues was examined by measuring the molecular absorption of gallium monofluoride (GaF) at 211.248 nm with the use of a commercially available HR-CS GF MAS system. Experimental conditions for the sensitive and precise determination of fluorine were optimized, including the time/temperature program as well as addition of gallium and modifier mixture in combined mode. Under these conditions the fluoride present in the sample was stabilized up to 600 °C, and the optimum vaporization temperature for GaF was 1540 °C. Palladium and zirconium deposited onto the graphite surface served as solid modifiers; sodium acetate and ruthenium modifiers were added directly to the sample. The limit of detection and the characteristic mass of the method were 0.43 μg/L and 8.7 pg, respectively. The proposed procedure was validated by the use of certified reference materials (CRMs) of lake water and animal tissue; the acceptable recovery was obtained, proving that it can be applied for samples with a similar matrix.

Hemodynamic control using models of electroacoustic signals of an oxygenated neuron

2021 ◽  
Vol 21 (3) ◽  
pp. 50-54
Author(s):  
B.G. Tsugkiev ◽  
◽  
L.Ch. Gagieva ◽  
T.V. Tsugkieva ◽  
M.M. Chegaev ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Nutritional Value ◽  
Growing Season ◽  
Comparative Assessment ◽  
Biologically Active ◽  
Onobrychis Viciifolia ◽  
Iron Copper ◽  
Calcium Phosphorus ◽  
Active Substances

The paper presents a comparative assessment of the nutritional value depending on the phenological phase of Onobrychis viciifolia Scop., as well as the determination of the regularity of the accumulation of biologically active substances and heavy metals in the herb of the species. The yield of green mass of plants was determined. From each hectare of sowing, 9,7 centners of protein can be obtained; the yield of fiber is 13 centners, BEV is 22,9 centners, fat is 1,6 centners, ash is 4 centners and carotene is 13.0 kg. Depending on the growing season, the chemical composition in the grass of Onobrychis viciifolia changes. The content of calcium, phosphorus increases, and the presence of iron, copper, cobalt, zinc, manganese and molybdenum and amino acids decreases.

scholarly journals DETERMINATION OF BTEX IN ENVIRONMENTAL SAMPLES: DEVELOPMENT AND PROTECTION OF TECHNOLOGIES AND ANALYTICAL METHODS

2019 ◽  
Vol 16 (31) ◽  
pp. 431-439
Author(s):  
Helilma de Andréa PINHEIRO ◽  
Ana Paula Mota FERREIRA ◽  
Ismael Carlos Braga ALVES ◽  
Antônio Fernandes SANTOS JÚNIOR ◽  
Raquel Bezerra dos Santos SAWCZUK ◽  
...  
Keyword(s):  
Petroleum Hydrocarbons ◽  
Environmental Samples ◽  
Low Cost ◽  
The United States ◽  
Operational Control ◽  
Toxic Compounds ◽  
Chromatographic Techniques ◽  
Benzene Toluene ◽  
And Storage

The contamination of water and soil by petroleum hydrocarbons is reported quite frequently, mainly due to accidents involving transport and storage of fuels. Among the most toxic compounds the most volatile benzene, toluene, ethylbenzene and xylene (BTEX). Residues of these compounds can cause serious environmental and public health troubles. Thus, more sensitive, selective and low-cost techniques, focused on the analysis and monitoring of these contaminants are being developed in order to establish operational control and to comply with local laws, but the intellectual property of such technologies is still unknown. The present study shows the panorama about patents, thesis and dissertations which have been already published on this theme. Together, the United States and China hold the largest number of patents, and most of thesis/dissertations describe methodologies for BTEX detection in water, although numerous environmental problems caused by oils in the soil had been reported. Also, the methods based on chromatographic techniques stand out in relation to the other techniques. It was possible to verify important advances in the field of sensors, especially the electrochemical ones, in order to solve the analytical gaps.

Sign in / Sign up

Export Citation Format

Share Document