Synthesis, Crystal Structure, and Theoretical Calculations of Two Cobalt, Nickel Coordination Polymers with 5-Nitroisophthalic Acid and Bis(imidazol) Ligands

2016 ◽  
Vol 69 (11) ◽  
pp. 1296 ◽  
Author(s):  
Ya-Ru Pan ◽  
Xiu-Mei Li ◽  
Jian-Ye Ji ◽  
Qing-Wei Wang

Two new complexes [Co(NIPH)(bimb)(H2O)]n (1) and [Ni(NIPH)(mbix)]n (2) (H2NIPH = 5-nitroisophthalic acid, bimb = 1,4-bis(imidazol-1-yl)butane, mbix = 1,3-bis(imidazol-1-ylmethyl)benzene) have been hydrothermally synthesised and structurally characterised by elemental analysis, IR spectroscopy, thermogravimetric analysis, UV spectroscopy, and single-crystal X-ray diffraction. Complex 1 exhibits a two-dimensional (2D) network, which was stabilised through O–H···O and C–H···O hydrogen-bonding interactions. Complex 2 shows a two-dimensional (2D) network structure, which was further extended into a three-dimensional supramolecular structure through C–H···O hydrogen bonds and π–π interactions. Moreover, we analysed the natural bond orbital (NBO) using the PBE0/LANL2DZ method in the Gaussian 03 program. The calculation results indicated the obvious covalent interactions between the coordinated atoms and the CoII or NiII ion.

2010 ◽  
Vol 152-153 ◽  
pp. 144-148
Author(s):  
Yan Xia Song ◽  
Chong Chen Wang ◽  
Yuan Lan Wang

Two two-dimensional and three-dimensional coordination-polymer, [Ni(2,2′,5,5′-bpdc) (H2O)]•H2O (1) and[Ni(2,2′,6,6′-bpdc)2]•4H2O (2) were obtained via hydrothermal reaction between NiCl2•6H2O and 2,2′-bipyridine-5,5′-dicarboxylic acid (2,2′,5,5′-bpdc), 2,2′-bipyridine-6,6′-dicarboxylic acid (2,2′,6,6′-bpdc) respectively, and were characterized by infrared spectra, thermogravimetric analysis and single crystal X-ray diffraction. The 2,2′,5,5′-bpdc and 2,2′,6,6′-bpdc ligands in compound 1 and 2 show different coordination modes respectively. The 2,2′,5,5′-bpdc ligand acts as pentadentate connector to coordinate with three different Ni(II) ions, and further extend to form square grid framework of compound 1; while 2,2′,6,6′-bpdc acts as tridentate ligand to chelate one Ni(II) ion to construct discrete monomeric unit, and those discrete units of [Ni(2,2′6,6′-bpdc)2]•4H2O are joined into 3-D framework via rich hydrogen bonding interactions. Thermogravimetric analysis revealed that both complex (1) and (2) display considerable thermal stability. CCDC 773845 & 773846.


Crystals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 19 ◽  
Author(s):  
Yaping Tao ◽  
Ligang Han ◽  
Andong Sun ◽  
Kexi Sun ◽  
Qian Zhang ◽  
...  

Methyl-3-aminothiophene-2-carboxylate (matc) is a key intermediate in organic synthesis, medicine, dyes, and pesticides. Single crystal X-ray diffraction analysis reveals that matc crystallizes in the monoclinic crystal system P21/c space group. Three matc molecules in the symmetric unit are crystallographically different and further linked through the N–H⋯O and N–H⋯N hydrogen bond interactions along with weak C–H⋯S and C–H⋯Cg interactions, which is verified by the three-dimensional Hirshfeld surface, two-dimensional fingerprint plot, and reduced density gradient (RDG) analysis. The interaction energies within crystal packing are visualized through dispersion, electrostatic, and total energies using three-dimensional energy-framework analyses. The dispersion energy dominates in crystal packing. To better understand the properties of matc, electrostatic potential (ESP) and frontier molecular orbitals (FMO) were also calculated and discussed. Experimental and calculation results suggested that amino and carboxyl groups can participate in various inter- and intra-interactions.


2014 ◽  
Vol 919-921 ◽  
pp. 2013-2016 ◽  
Author(s):  
Ya Bing Liu ◽  
Hong Jie Wang ◽  
Hong Kai Zhao

A POM - based organice - inorganic hybrid compound with the chemical formula of[Cu (phen)2]3[W6O19] (phen = 1,10-phenanthroline) (1) has been hydrothermally synthesized andstructurally characterized by the elemental analysis, and single crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic space groupC2/c witha=18.319(4) Å,b= 17.311(4) Å,c= 22.248(4) Å,β= 112.40(3) o,V= 6523(2) Å3,Z= 4, R1= 0.0448, andwR2=0.1218. Compound 1 consists of the [W6O19]3-building blocks and [Cu (phen)2]+metal organic cationic moieties, which are packed together via the extensive hydrogen-bonding interactions to form a three-dimensional supramolecular framework. The adsorption of methylene blue (MB) under UV irradiation with 1 as the heterogeneous adsorbent has been investigated, showing a good adsorptive property of 1 for MB degradation.


2015 ◽  
Vol 48 (4) ◽  
pp. 1072-1079 ◽  
Author(s):  
Geoffrey K. Feld ◽  
Michael Heymann ◽  
W. Henry Benner ◽  
Tommaso Pardini ◽  
Ching-Ju Tsai ◽  
...  

X-ray free-electron lasers (XFELs) offer a new avenue to the structural probing of complex materials, including biomolecules. Delivery of precious sample to the XFEL beam is a key consideration, as the sample of interest must be serially replaced after each destructive pulse. The fixed-target approach to sample delivery involves depositing samples on a thin-film support and subsequent serial introductionviaa translating stage. Some classes of biological materials, including two-dimensional protein crystals, must be introduced on fixed-target supports, as they require a flat surface to prevent sample wrinkling. A series of wafer and transmission electron microscopy (TEM)-style grid supports constructed of low-Zplastic have been custom-designed and produced. Aluminium TEM grid holders were engineered, capable of delivering up to 20 different conventional or plastic TEM grids using fixed-target stages available at the Linac Coherent Light Source (LCLS). As proof-of-principle, X-ray diffraction has been demonstrated from two-dimensional crystals of bacteriorhodopsin and three-dimensional crystals of anthrax toxin protective antigen mounted on these supports at the LCLS. The benefits and limitations of these low-Zfixed-target supports are discussed; it is the authors' belief that they represent a viable and efficient alternative to previously reported fixed-target supports for conducting diffraction studies with XFELs.


2018 ◽  
Vol 74 (8) ◽  
pp. 889-893
Author(s):  
Qian-Kun Zhou ◽  
Lin Wang ◽  
Dong Liu

As a class of multifunctional materials, crystalline supramolecular complexes have attracted much attention because of their unique architectures, intriguing topologies and potential applications. In this article, a new supramolecular compound, namely catena-poly[4,4′-(buta-1,3-diene-1,4-diyl)dipyridin-1-ium [(μ4-benzene-1,2,4,5-tetracarboxylato-κ6 O 1,O 1′:O 2:O 4,O 4′:O 5)cadmium(II)]], {(C14H14N2)[Cd(C10H2O8)]} n or {(1,4-H2bpbd)[Cd(1,2,4,5-btc)]} n , has been prepared by the self-assembly of Cd(NO3)2·4H2O, benzene-1,2,4,5-tetracarboxylic acid (1,2,4,5-H4btc) and 1,4-bis(pyridin-4-yl)buta-1,3-diene (1,4-bpbd) under hydrothermal conditions. The title compound has been structurally characterized by IR spectroscopy, elemental analysis, powder X-ray diffraction and single-crystal X-ray diffraction analysis. Each CdII centre is coordinated by six O atoms from four different (1,2,4,5-btc)4− tetraanions. Each CdII cation, located on a site of twofold symmetry, binds to four carboxylate groups belonging to four separate (1,2,4,5-btc)4− ligands. Each (1,2,4,5-btc)4− anion, situated on a position of \overline{1} symmetry, binds to four crystallographically equivalent CdII centres. Neighbouring CdII cations interconnect bridging (1,2,4,5-btc)4− anions to form a three-dimensional {[Cd(1,2,4,5-btc)]2−} n anionic coordination network with infinite tubular channels. The channels are visible in both the [1\overline{1}0] and the [001] direction. Such a coordination network can be simplified as a (4,4)-connected framework with the point symbol (4284)(4284). To balance the negative charge of the metal–carboxylate coordination network, the cavities of the network are occupied by protonated (1,4-H2bpbd)2+ cations that are located on sites of twofold symmetry. In the crystal, there are strong hydrogen-bonding interactions between the anionic coordination network and the (1,4-H2bpbd)2+ cations. Considering the hydrogen-bonding interactions, the structure can be further regarded as a three-dimensional (4,6)-connected supramolecular architecture with the point symbol (4264)(42687·84). The thermal stability and photoluminescence properties of the title compound have been investigated.


2020 ◽  
Vol 76 (11) ◽  
pp. 1024-1033
Author(s):  
Fang-Hua Zhao ◽  
Shi-Yao Li ◽  
Wen-Yu Guo ◽  
Zi-Hao Zhao ◽  
Xiao-Wen Guo ◽  
...  

Two new CdII MOFs, namely, two-dimensional (2D) poly[[[μ2-1,4-bis(1H-benzimidazol-1-yl)butane](μ2-heptanedioato)cadmium(II)] tetrahydrate], {[Cd(C7H10O4)(C18H18N4)]·4H2O} n or {[Cd(Pim)(bbimb)]·4H2O} n (1), and 2D poly[diaqua[μ2-1,4-bis(1H-benzimidazol-1-yl)butane](μ4-decanedioato)(μ2-decanedioato)dicadmium(II)], [Cd2(C10H16O4)2(C18H18N4)(H2O)2] n or [Cd(Seb)(bbimb)0.5(H2O)] n (2), have been synthesized hydrothermally based on the 1,4-bis(1H-benzimidazol-1-yl)butane (bbimb) and pimelate (Pim2−, heptanedioate) or sebacate (Seb2−, decanedioate) ligands. Both MOFs were structurally characterized by single-crystal X-ray diffraction. In 1, the CdII centres are connected by bbimb and Pim2− ligands to generate a 2D sql layer structure with an octameric (H2O)8 water cluster. The 2D layers are further connected by O—H...O hydrogen bonds, resulting in a three-dimensional (3D) supramolecular structure. In 2, the CdII centres are coordinated by Seb2− ligands to form binuclear Cd2 units which are linked by bbimb and Seb2− ligands into a 2D hxl layer. The 2D layers are further connected by O—H...O hydrogen bonds, leading to an 8-connected 3D hex supramolecular network. IR and UV–Vis spectroscopy, thermogravimetric analysis and solid-state photoluminescence analysis were carried out on both MOFs. Luminescence sensing experiments reveal that both MOFs have good selective sensing towards Fe3+ in aqueous solution.


2015 ◽  
Vol 71 (1) ◽  
pp. 48-52 ◽  
Author(s):  
José J. Campos-Gaxiola ◽  
Susana P. Arredondo Rea ◽  
Ramón Corral Higuera ◽  
Herbert Höpfl ◽  
Adriana Cruz Enríquez

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium cation with perhalometallate anions to give 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C12H12N2)[CoCl4], (I), and 4-[(E)-2-(pyridin-1-ium-2-yl)ethenyl]pyridinium tetrachloridozincate(II), (C12H12N2)[ZnCl4], (II). The compounds have been structurally characterized by single-crystal X-ray diffraction analysis, showing the formation of a three-dimensional network throughX—H...ClnM−(X= C, N+;n= 1, 2;M= CoII, ZnII) hydrogen-bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).


2015 ◽  
Vol 71 (9) ◽  
pp. m156-m157
Author(s):  
Guo-Wang Xu ◽  
Ye-Nan Wang ◽  
Hong-Xu Xia ◽  
Zhong-Long Wang

A red block-shaped crystal of the title compound, [Co(HCOO)2(C12H10N4)2]n, was obtained by the reaction of cobalt(II) nitrate hexahydrate, formic acid and 1,1′-(1,4-phenylene)bis(1H-imidazole) (bib) molecules. The asymmetric unit consists of one CoIIcation, one formate ligand and two halves of a bib ligand. The central CoIIcation, located on an inversion centre, is coordinated by two carboxylate O atoms and four N atoms from bib ligands, completing an octahedral coordination geometry. The CoIIcentres are bridged by bib ligands, giving a two-dimensional net. Topologically, taking the CoIIatoms as nodes and the bib ligands as linkers, the two-dimensional structure can be simplified as a typicalsql/Shubnikov tetragonal plane network. The structure features C—H...O hydrogen-bonding interactions between formate and bib ligands, resulting in a three-dimensional supramolecular network.


1996 ◽  
Vol 437 ◽  
Author(s):  
D.P. Piotrowski ◽  
S.R. Stock ◽  
A. Guvenilir ◽  
J.D. Haase ◽  
Z.U. Rek

AbstractIn order to understand the macroscopic response of polycrystalline structural materials to loading, it is frequently essential to know the spatial distribution of strain as well as the variation of micro-texture on the scale of 100 μm. The methods must be nondestructive, however, if the three-dimensional evolution of strain is to be studied. This paper describes an approach to high resolution synchrotron x-ray diffraction tomography of polycrystalline materials. Results from model samples of randomly-packed, millimeter-sized pieces of Si wafers and of similarly sized single-crystal Al blocks have been obtained which indicate that polychromatic beams collimated to 30 μm diameter can be used to determine the depth of diffracting volume elements within ± 70 μm. The variation in the two-dimensional distribution of diffracted intensity with changing sample to detector separation is recorded on image storage plates and used to infer the depth of diffracting volume elements.


Sign in / Sign up

Export Citation Format

Share Document