Phenotypic and genetic parameters for lamb and hogget traits in a flock of South Australian Merino sheep

1987 ◽  
Vol 27 (2) ◽  
pp. 205 ◽  
Author(s):  
JRW Walkley ◽  
RW Ponzoni ◽  
CHS Dolling
Keyword(s):  
Genetic Parameters ◽  
Genetic Correlations ◽  
Fibre Diameter ◽  
Merino Sheep ◽  
National Performance ◽  
Adjustment Factors ◽  
Fleece Weight ◽  
Parameter Values ◽  
Australian Merino ◽  
Birth Type

The heritability of and phenotypic and genetic correlations among weaning weight (WW). greasy fleece weight (GFW), scouring yield (YLD), clean fleece weight (CFW), fibre diameter (FD), crimps per inch (CR) and staple length (SL) were estimated in a flock consisting of a control and 2 selection lines of South Australian Merino sheep. The effects of type of rearing, age of dam and sex were also examined. Estimates were compared with those currently in use in WOOLPLAN (National Performance Recording Scheme for non-pedigreed sheep) and in other studies. In general, agreement between the present study and other estimates was good, but there were some exceptions, namely: (i) standard deviation of GFW and FD; (ii) 'adjustment factors' for day of birth, type of rearing and age of dam for GFW, CFW and liveweight traits; (iii) heritability of YLD; (iv) phenotypic correlations of GFW and CFW with FD, and between YLD and CFW and (v) genetic correlations of WW with GFW, CFW and FD. It is concluded that special attention should be given to these exceptions in order to decide whether alterations to current 'accepted' parameter values are justified.

Across population genetic parameters for wool, growth, and reproduction traits in Australian Merino sheep. 2. Estimates of heritability and variance components

2007 ◽  
Vol 58 (2) ◽  
pp. 177 ◽  
Author(s):  
E. Safari ◽  
N. M. Fogarty ◽  
A. R. Gilmour ◽  
K. D. Atkins ◽  
S. I. Mortimer ◽  
...  
Keyword(s):  
Maternal Effects ◽  
Variance Components ◽  
Genetic Parameters ◽  
Growth Traits ◽  
Fibre Diameter ◽  
Production Traits ◽  
Merino Sheep ◽  
Reproduction Traits ◽  
Fleece Weight ◽  
Australian Merino

Precise estimates of genetic parameters are required for genetic evaluation systems. This study combined data from 7 research resource flocks across Australia to estimate variance components and genetic parameters for production traits in the Australian Merino sheep. The flocks were maintained for several generations and represented contemporary Australian Merino fine, medium, and broad wool bloodlines over the past 30 years. Over 110 000 records were available for analysis for each of the major wool traits, and 50 000 records for reproduction and growth traits with over 2700 sires and 25 000 dams. A linear mixed animal model was used to analyse 6 wool traits comprising clean fleece weight (CFW), greasy fleece weight (GFW), fibre diameter (FD), yield (YLD), coefficient of variation of fibre diameter (CVFD), and standard deviation of fibre diameter (SDFD), 4 growth traits comprising birth weight (BWT), weaning weight (WWT), yearling weight (YWT), and hogget weight (HWT), and 4 reproduction traits comprising fertility (FER), litter size (LS), lambs born per ewe joined (LB/EJ), and lambs weaned per ewe joined (LW/EJ). The range of direct heritability estimates for the wool traits was 0.42 ± 0.01 for CFW to 0.68 ± 0.01 for FD. For growth traits the range was 0.18 ± 0.01 for BWT to 0.38 ± 0.01 for HWT, and for reproduction traits 0.045 ± 0.01 for FER to 0.074 ± 0.01 for LS. Significant maternal effects were found for wool and growth, but not reproduction traits. There was significant covariance between direct and maternal genetic effects for all wool and growth traits except for YWT. The correlations between direct and maternal effects ranged from –0.60 ± 0.02 for GFW to –0.21 ± 0.10 for SDFD in the wool traits and from –0.21 ± 0.03 for WWT to 0.25 ± 0.08 for HWT in the growth traits. Litter effects were significant for all wool and growth traits and only for LS in reproduction traits. The mating sire was fitted in the models for reproduction traits and this variance component accounted for 21, 17, and 8% of the total phenotypic variation for FER, LB/EJ, and LW/EJ, respectively. The implications of additional significant variance components for the estimation of heritability are discussed.

scholarly journals Genetic parameters for yearling wool production, wool quality and bodyweight traits in fine wool Merino sheep

2008 ◽  
Vol 48 (9) ◽  
pp. 1168 ◽  
Author(s):  
A. A. Swan ◽  
I. W. Purvis ◽  
L. R. Piper
Keyword(s):  
Genetic Parameters ◽  
Genetic Correlations ◽  
Fibre Diameter ◽  
Merino Sheep ◽  
Wool Quality ◽  
Staple Strength ◽  
Fleece Weight ◽  
Highly Correlated ◽  
Genetic Evaluations ◽  
Trait Groups

Genetic parameters were estimated for traits measured in the first year of production in a multi-bloodline flock of fine wool Merino sheep. Between 5025 and 9271 animals were measured, depending on the trait, and these animals were the progeny of up to 430 sires. Heritability estimates for fleece weight traits ranged from 0.37 to 0.49, while estimates for five wool quality traits ranged from 0.34 for staple strength to 0.66 for mean fibre diameter. For bodyweight, the heritability estimated at weaning was 0.20, and at the yearling age was 0.51. Maternal genetic effects were significant for fleece weight and bodyweight traits and were highly correlated between these trait groups, indicating that these effects are determined by similar groups of genes in both trait groups. While most genetic correlation estimates were either favourable or neutral, there were economically antagonistic correlations between fleece weight and mean fibre diameter, ranging from 0.15 to 0.30, and between mean fibre diameter and staple strength (0.26). Overall, the heritabilities and genetic correlations estimated in this fine wool population were similar to estimates from other strains, indicating that outcomes from selection programs will be similar across strains and that fine wool sheep can be included in across flock genetic evaluations with other strains.

Effects of inbreeding on four families of Peppin Merinos

1957 ◽  
Vol 8 (3) ◽  
pp. 299 ◽  
Author(s):  
JM Doney
Keyword(s):  
Fibre Diameter ◽  
Genetic Effect ◽  
Direct Consequence ◽  
Specific Gene ◽  
Single Strain ◽  
Merino Sheep ◽  
Fibre Number ◽  
Per Se ◽  
Fleece Weight ◽  
Australian Merino

The influence of inbreeding on several fleece and body characters in a strain of Australian Merino sheep is reported. The four families from which data were taken were derived from a single strain of Peppin Merinos. Inbreeding without selection has been carried on since the foundation of the families between 1939 and 1944. Inbreeding is responsible for a reduction in body size, fertility, greasy and clean fleece weight, and wrinkle score, but has relatively little influence on the fleece components (yield, staple length, fibre diameter, and density of fibre population). It follows that the reduction in fleece weight is a direct consequence of a decrease in total fibre number. Since the reduction in fibre number is likely to be a correlated effect of low pre-natal and early post-natal growth rates, it is suggested that the inbreeding has had no genetic effect on the several independent systems involved in adult wool production but has affected only those associated with fitness and vigour. The depression due to inbreeding therefore may not be caused by specific gene fixation but by increased homozygosity per se.

Response to selection in Australian Merino sheep. VII. Phenotypic and genetic parameters for some wool follicle characteristics and their correlation with wool and body traits

1975 ◽  
Vol 26 (5) ◽  
pp. 937 ◽  
Author(s):  
N Jackson ◽  
T Nay ◽  
HN Turner ◽  
Turner H Newton
Keyword(s):  
Control Systems ◽  
Genetic Control ◽  
Genetic Parameters ◽  
Unit Area ◽  
Fibre Diameter ◽  
Environmental Correlations ◽  
Merino Sheep ◽  
Wool Follicle ◽  
Australian Merino

Four numerical characteristics-follicle depth, follicle curvature, number of follicles per unit area of skin, and ratio of number of secondary to number of primary follicles-describing the size, shape, and arrangement of wool follicles have been measured in Peppin Merino sheep at 4-5 months (weaning), 15-16 months (two-tooth shearing) and at later ages ranging from 2 1/2 to 7 1/2 years. Estimates of their repeatability, heritability and phenotypic, genetic, and environmental correlations with 10 wool and body characteristics are reported. All four follicle characteristics were found to be highly inherited and sufficiently correlated with wool characteristics to be of interest to both the wool biologist and the sheep breeder. Fixed environmental effects influenced the expression of some follicle characteristics, while others, notably follicle curvature at any age, were unaffected, and therefore potentially more useful as practical selection aids. Groups of sheep selected for clean wool weight with control of (i) fibre diameter and wrinkle score, and (li) crimp frequency and wrinkle score, exhibited changes in the four follicle characteristics, which agreed with what the genetic correlation estimates would predict. The role of follicle characteristics in the biology of genetic control of wool growth is portrayed by fitting causal models invoking follicle characteristics as intermediates between the gene and the wool character. The analysis separates three independent genetic control systems, the identity of which corresponds closely to factors postulated in previous theoretical studies.

Genetic studies of South Australian Merino sheep. 4. Genetic, phenotypic and environmental correlations between various wool and body traits

1982 ◽  
Vol 33 (2) ◽  
pp. 363 ◽  
Author(s):  
IP Gregory
Keyword(s):  
Great Increase ◽  
Fibre Diameter ◽  
Skin Thickness ◽  
Primary Follicle ◽  
Genetic Studies ◽  
Environmental Correlations ◽  
Merino Sheep ◽  
Selection For ◽  
Fleece Weight ◽  
Australian Merino

Genetic, phenotypic and environmental correlations were estimated between 23 quantitative and qualitative wool and body traits of South Australian Merino sheep. Clean fleece weight was significantly correlated genetically with greasy fleece weight (0.62), yield (0.47), staple length (0.41), crimps per inch (-0.34), secondary/primary follicle ratio (0.37) and skin thickness (0.39). No significant half-sib genetic correlation was found between clean fleece weight and fibre diameter and the dam-offspring correlation was quite low, although significant (0.16, P < 0.05). This indicates that selection for clean fleece weight should not lead to any great increase in fibre diameter. Skin thickness is discussed as a possible early indicator of clean fleece weight.

Predicted responses in Merino sheep from selection combining visually assessed and measured traits

2010 ◽  
Vol 50 (10) ◽  
pp. 976 ◽  
Author(s):  
S. I. Mortimer ◽  
K. D. Atkins ◽  
S. J. Semple ◽  
N. M. Fogarty
Keyword(s):  
Fibre Diameter ◽  
Selection Combining ◽  
Breeding Programs ◽  
Dual Purpose ◽  
Merino Sheep ◽  
Merino Wool ◽  
Wool Quality ◽  
Staple Strength ◽  
Fleece Weight ◽  
Australian Merino

Visually assessed traits for wool quality and ease of management are important to Merino sheep breeders and need to be considered in breeding programs. The present study reports on the predicted correlated responses in visual traits from selection using a range of standard MERINOSELECT™ indices available for use in Australian Merino breeding programs. The effect of including a visual trait in the index is also reported. The visual scored traits were classer grade, wool quality (handle, character and colour), conformation (neck and body wrinkle, front and back leg structure) and fleece rot. The indices covered a range of micron premiums of varying emphasis on increasing fleece weight and reducing fibre diameter. The indices were for Merino wool enterprises (Merino 14%, Merino 7% and Merino 3.5%) and Merino dual purpose wool and meat enterprises (Dual Purpose 7% and Dual Purpose 3.5%). The breeding objectives for the indices included fleece weight, fibre diameter, coefficient of variation of fibre diameter, staple strength, bodyweight and reproduction. Selection over 10 years using the standard MERINOSELECT™ indices is predicted to result in a small correlated improvement in the wool quality traits and classer grade, with a slight deterioration in fleece rot score. The improvement in wool handle, character and colour are greater with those indices that have a greater emphasis on reducing fibre diameter than with those increasing fleece weight. Indices with more emphasis on increased fleece weight than on reduced fibre diameter are predicted to result in small increases in neck and body wrinkle scores and a slight deterioration in wool colour. Inclusion of classer grade, handle, character or colour provided slight extra gains in fleece weight for indices that emphasised reduced fibre diameter through increased accuracy of selection.

Inclusion of skin follicle traits in selection indices in breeding programs improves genetic gain in Australian fine-wool Merinos

2007 ◽  
Vol 58 (9) ◽  
pp. 921 ◽  
Author(s):  
M. Asadi Fozi ◽  
J. H. J. Van der Werf ◽  
A. A. Swan
Keyword(s):  
Body Weight ◽  
Coefficient Of Variation ◽  
Genetic Parameters ◽  
Genetic Correlations ◽  
Fibre Diameter ◽  
Selection Criterion ◽  
Breeding Programs ◽  
Breeding Objectives ◽  
Staple Strength ◽  
Fleece Weight

Genetic parameters for skin follicle traits, wool traits, body weight, and number of lambs weaned per ewe joined were estimated for 5108 10-month-old Australian fine-wool Merinos born between 1990 and 1996. These animals were descended from 261 sires and 2508 dams. The skin follicle number index that is based on skin surface area, and primary, secondary, or total follicle density were introduced as possible early-age selection criteria estimated at 6 months of age. Heritability estimates for total, secondary, and primary follicle number index were 0.45 ± 0.04, 0.46 ± 0.04, and 0.38 ± 0.04, respectively. The genetic correlations of total follicle number index with clean fleece weight, mean fibre diameter, staple strength, coefficient of variation of fibre diameter, body weight, and number of lambs weaned were 0.16, –0.67, 0.00, 0.03, 0.22, and 0.22, respectively. Responses to selection on indices including and excluding follicle traits were calculated based on the genetic parameters estimated, and with annual responses calculated using an optimised age structure. On average, 10% greater response was predicted when total follicle number index was used as an additional selection criterion in different micron premium scenarios. In comparison, skin follicle density had a smaller effect on genetic improvement. The extra response was ~1%. Similar index responses were obtained when total follicle number index was used as a replacement selection criterion for clean fleece weight, mean fibre diameter, and coefficient of variation of fibre diameter for breeding objectives with low emphasis on fibre diameter. In objectives with high emphasis on fibre diameter, unfavourable correlated responses in staple strength and CV of fibre diameter limited the effectiveness of using total follicle number index as a selection criterion. Although the use of total follicle number index as an additional selection criterion can be favourable for some breeding objectives, measuring this trait is currently cost prohibitive to inclusion in Merino breeding programs.

Genetic evaluation of production traits between and within flocks of Merino sheep. II. Component traits of the Hogget fleece

1993 ◽  
Vol 44 (7) ◽  
pp. 1523 ◽  
Author(s):  
SI Mortimer ◽  
KD Atkins
Keyword(s):  
Agricultural Research ◽  
Genetic Correlations ◽  
Fibre Diameter ◽  
Matter Content ◽  
Research Centre ◽  
Production Traits ◽  
Merino Sheep ◽  
Phenotypic Correlations ◽  
Genetic And Phenotypic Correlations ◽  
Fleece Weight

Components of the fleece and wool quality traits were measured or assessed on Merino hogget ewes in an unselected multiple-bloodline flock over a 7-year period at Trangie Agricultural Research Centre, N.S.W. The traits recorded were face cover score (FC), leg cover score (LC), neck fold score (NF), body fold score (BF), wax content (W), suint content (S), vegetable matter content (VM), dust penetration (D), follicle density (N) and follicle ratio (RA). Genetic differences within and between flocks of Merino sheep were examined for the traits, and estimates of heritability and within-flock genetic and phenotypic correlations and between-flock genetic correlations among the traits were obtained. Genetic and phenotypic correlations were also estimated between these traits and the major wool production traits: greasy fleece weight (GFW), clean fleece weight (CFW), fibre diameter (FD), body weight (BWT) and staple length (SL). Significant strain. flock within strain and flock effects were wresent for all traits. The influence of environmental effects (birth-rearing type, age at measurement and age of dam) on the traits was estimated, with the birth-rearing type being significant and the largest effect for most traits. Paternal half-sib heritability estimates were 0.44� 0.06 for FC, 0.35� 0.06 for LC, 0.24�0.05 for NF, 0.23�0.05 for BF, 0.38�0.07 for W, 0.42�0.07 for S, 0.06�0.04 for VM, 0.22�0.06 for D, 0.20� 0.07 for N and 0.21�0.07 for RA. Estimates of within-flock phenotypic and genetic correlations were in broad agreement with available published estimates. The implications of the results for Merino breeding programs are discussed.

Genetic studies of South Australian Merino sheep. 3. Heritabilities of various wool and body traits

1982 ◽  
Vol 33 (2) ◽  
pp. 355 ◽  
Author(s):  
IP Gregory
Keyword(s):  
Body Weight ◽  
Fibre Diameter ◽  
Skin Thickness ◽  
Production Traits ◽  
Primary Follicle ◽  
Merino Sheep ◽  
Main Production ◽  
Fleece Weight ◽  
Australian Merino ◽  
Staple Length

Heritabilities have been estimated for a large number of quantitative and qualitative wool and body traits recorded on two flocks of South Australian Merino sheep over a 12-year period. Data were unadjusted for fixed environmental effects and so the estimates are applicable to the heterogeneous populations found in most practical situations. Dam-offspring heritabilities of quantitative traits ranged from 0.15 for primary follicle number to 0.63 for body weight. Greasy and clean fleece weights, percentage clean yield, staple length, crimps per inch, fibre diameter, secondary and total follicle number, skin thickness, coefficient of variation of fibre diameter and secondary/primary follicle ratio had moderate to high heritabilities. Dam-offspring heritabilities of qualitative traits ranged from 0.12 for weather damage of the fleece to 0.75 for birthcoat. Total folds, face cover and hocks had high heritabilities, and wool character, type of staple formation and wool quality had moderate heritabilities. The main production traits (body weight, greasy fleece weight, yield, clean fleece weight, staple length, fibre diameter and total follicle number) were corrected for variation due to type of birth and age of dam and their heritabilities re-estimated. No change occurred in the half-sib heritabilities; dam-offspring heritabilities increased by an average of 0.05.

Genetic parameters for Australian maternal and dual-purpose meatsheep breeds. III. Liveweight, fat depth and wool production in Coopworth sheep

1994 ◽  
Vol 45 (2) ◽  
pp. 481 ◽  
Author(s):  
LD Brash ◽  
NM Fogarty ◽  
AR Gilmour
Keyword(s):  
Genetic Correlation ◽  
Fixed Effects ◽  
Genetic Correlations ◽  
Fibre Diameter ◽  
Dual Purpose ◽  
Management Group ◽  
Derivative Free ◽  
Fleece Weight ◽  
Group Sex ◽  
Birth Type

Heritability was estimated for weaning liveweight of 7030 Coopworth sheep from 10 flocks representing 92 sires by derivative-free restricted maximum likelihood procedures using an animal model. Similar analyses were used for yearling liveweight and greasy fleece weight with over 4000 animals, fat depth on 2184 animals and fibre diameter on 966 animals. The fixed effects of flock-year-management group, sex, birth type, rearing type and age were significant for most traits. Estimates of heritability were 0.45 � 0 - 07 for weaning liveweight, 0.38 � 0.07 for yearling liveweight, 0 28 � 0.05 for greasy fleece weight, 0.18 � 0 08 for fibre diameter and 0.13 � 0.04 for ultrasonic fat depth at the C site. The genetic correlations of liveweights with greasy fleece weight were positive, but close to zero with fibre diameter. The genetic correlation between greasy fleece weight and fibre diameter was 0.422 � 0.25. Fat depth was highly genetically correlated with liveweights at weaning (0.53 � 0.22) and yearling (0.64 � 0- 20) ages, was highly negatively correlated with fibre diameter (-0.55 � 0.28) and had a small positive genetic correlation with greasy fleece weight (0.15 � 0.34).

Sign in / Sign up

Export Citation Format

Share Document