Aromatic hydrocarbons in seawater, sediments and clams from Green Island, Great Barier Reef, Australia

1987 ◽  
Vol 38 (4) ◽  
pp. 501 ◽  
Author(s):  
JD Smith ◽  
J Bagg ◽  
YO Sin

Seawater, sediment and clams from the coral reef around Green Island have been analysed for polycyclic aromatic hydrocarbons using high-performance liquid chromatography with fluorescence for detection and identification of individual compounds. Green Island is of interest because it is a tourist resort and the most visited coral island of the Great Barrier Reef. The concentration ranges of some of the polycyclic aromatic hydrocarbons detected were: in water (ng I-1), pyrene 53-< 1, anthracene 25-<1, benzo(a)pyrene 6-<0.2; in sediments (�g kg-1 dry wt), pyrene 15- < 1, anthracene, 1.0-<0.06, benzo(a)pyrene 4.3- <0.004; in clams (pg kg-1 wet wt), pyrene <0.03, anthracene < 0.05, benzo(a)pyrene <0.004. Only sediments near power-boat moorings were found to contain low but measurable amounts of several different polycyclic aromatic hydrocarbons in contrast to the baseline amounts found at ihe other locations. The presence of several polycyclic aromatic hydrocarbons at measurable levels strongly suggests that their origin was from fuel spillage or exhaust emissions. The fluorescent intensity of organic-solvent extracts of seawater which had also been analysed for polycyclic aromatic hydrocarbons was measured using either fixed-wavelength or synchronous-wavelength excitation. For both types of excitation, fluorescent intensities could be used to indicate the presence of small amounts of polycylic aromatic hydrocarbons which were just above the limit of detection using high-performance liquid chromatography.

2011 ◽  
Vol 64 (2) ◽  
pp. 477-484 ◽  
Author(s):  
Manli Wu ◽  
Huining Xu ◽  
Ya Yu ◽  
Lili Wang

A sensitive and fast method was developed to quantitatively analyse the six polycyclic aromatic hydrocarbons (fluoranthene (FLT), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (Bap), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (INPY)) by high performance liquid chromatography (UPLC) coupling with tandem mass spectrometry (MS/MS). Chromatographic separation was performed on a Waters Acquity UPLCTM BEHC18 column (1.7 μm, 2.1 mm × 50 mm). A 0.2 μm precolumn filter was used to protect the analytical column. Mobile phase A was acetonitrile containing 0.5% toluene. Mobile phase B was water. Linearity of detection was in the range of 1–100 μg L−1; LOD of 5 PAHs were lower than 0.1 μg L−1; LOQ were 0.2 μg L−1 except for benzo[k]fluoranthene. The LOD and the LOQ of benzo[k]fluoranthene were respectively 0.1 μg L−1 and 0.8 μg L−1. Wastewater samples collected from two wastewater treatment plants were determined using this method respectively. Recovery of all compounds varied from 67.8 ± 10.6% to 113.2 ± 7.2%. In comparison with the existing methods, this rapid method saves time and solvent and improves instrument sample throughput by 2–5 fold.


Sign in / Sign up

Export Citation Format

Share Document