Hillslope-scale prediction of terrain and forest canopy effects on temperature and near-surface soil moisture deficit

2017 ◽  
Vol 26 (3) ◽  
pp. 191 ◽  
Author(s):  
Sean F. Walsh ◽  
Petter Nyman ◽  
Gary J. Sheridan ◽  
Craig C. Baillie ◽  
Kevin G. Tolhurst ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Forest Floor ◽  
Drought Index ◽  
Surface Soil ◽  
Surface Soil Moisture ◽  
Soil Moisture Deficit ◽  
Near Surface ◽  
Moisture Deficit ◽  
Plant Area Index ◽  
Hillslope Scale

Soil moisture has important effects on fuel availability, but is often assessed using drought indices at coarse spatial resolution, without accounting for the fine-scale spatial effects of terrain and canopy variation on forest floor moisture. In this study, we examined the spatial variability of air temperature, litter temperature and near-surface soil moisture (θ, 0–100 mm) using data from field experiments at 17 sites in south-east Australia, covering a range of topographic aspects and vegetation types, within climates from semiarid to wet montane. Temperatures and θ in mountainous environments were found to vary at much finer spatial scales than typical drought index grid dimensions (several kilometres). Using terrain elevation, local insolation ratio and plant area index, we developed semi-empirical microclimate models for air and litter temperatures, then used modelled temperatures as input into calculations of the Keetch–Byram Drought Index, a widely used index of soil moisture deficit. Drought index results based on predicted litter temperature were found to explain 91% of the spatial variation in near-surface soil moisture at our experimental sites. These results suggest the potential for routine hillslope-scale predictions of forest floor moisture status, which may be useful in the management of fire, particularly prescribed burning, in complex terrain.

scholarly journals Developing a drought-monitoring index for the contiguous US using SMAP

2018 ◽  
Vol 22 (12) ◽  
pp. 6611-6626 ◽  
Author(s):  
Sara Sadri ◽  
Eric F. Wood ◽  
Ming Pan
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Drought Index ◽  
Surface Soil ◽  
Root Zone ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Short Term ◽  
Near Surface ◽  
Index Maps

Abstract. Since April 2015, NASA's Soil Moisture Active Passive (SMAP) mission has monitored near-surface soil moisture, mapping the globe (between 85.044∘ N/S) using an L-band (1.4 GHz) microwave radiometer in 2–3 days depending on location. Of particular interest to SMAP-based agricultural applications is a monitoring product that assesses the SMAP near-surface soil moisture in terms of probability percentiles for dry and wet conditions. However, the short SMAP record length poses a statistical challenge for meaningful assessment of its indices. This study presents initial insights about using SMAP for monitoring drought and pluvial regions with a first application over the contiguous United States (CONUS). SMAP soil moisture data from April 2015 to December 2017 at both near-surface (5 cm) SPL3SMP, or Level 3, at ∼36 km resolution, and root-zone SPL4SMAU, or Level 4, at ∼9 km resolution, were fitted to beta distributions and were used to construct probability distributions for warm (May–October) and cold (November–April) seasons. To assess the data adequacy and have confidence in using short-term SMAP for a drought index estimate, we analyzed individual grids by defining two filters and a combination of them, which could separate the 5815 grids covering CONUS into passed and failed grids. The two filters were (1) the Kolmogorov–Smirnov (KS) test for beta-fitted long-term and the short-term variable infiltration capacity (VIC) land surface model (LSM) with 95 % confidence and (2) good correlation (≥0.4) between beta-fitted VIC and beta-fitted SPL3SMP. To evaluate which filter is the best, we defined a mean distance (MD) metric, assuming a VIC index at 36 km resolution as the ground truth. For both warm and cold seasons, the union of the filters – which also gives the best coverage of the grids throughout CONUS – was chosen to be the most reliable filter. We visually compared our SMAP-based drought index maps with metrics such as the U.S. Drought Monitor (from D0–D4), 1-month Standard Precipitation Index (SPI) and near-surface VIC from Princeton University. The root-zone drought index maps were shown to be similar to those produced by the root-zone VIC, 3-month SPI, and the Gravity Recovery and Climate Experiment (GRACE). This study is a step forward towards building a national and international soil moisture monitoring system without which quantitative measures of drought and pluvial conditions will remain difficult to judge.

scholarly journals The impact of near-surface soil moisture assimilation at subseasonal, seasonal, and inter-annual timescales

2015 ◽  
Vol 19 (12) ◽  
pp. 4831-4844 ◽  
Author(s):  
C. Draper ◽  
R. Reichle
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Surface Soil ◽  
Root Zone ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Near Surface ◽  
In Situ Observations ◽  
The Impact

Abstract. A 9 year record of Advanced Microwave Scanning Radiometer – Earth Observing System (AMSR-E) soil moisture retrievals are assimilated into the Catchment land surface model at four locations in the US. The assimilation is evaluated using the unbiased mean square error (ubMSE) relative to watershed-scale in situ observations, with the ubMSE separated into contributions from the subseasonal (SMshort), mean seasonal (SMseas), and inter-annual (SMlong) soil moisture dynamics. For near-surface soil moisture, the average ubMSE for Catchment without assimilation was (1.8 × 10−3 m3 m−3)2, of which 19 % was in SMlong, 26 % in SMseas, and 55 % in SMshort. The AMSR-E assimilation significantly reduced the total ubMSE at every site, with an average reduction of 33 %. Of this ubMSE reduction, 37 % occurred in SMlong, 24 % in SMseas, and 38 % in SMshort. For root-zone soil moisture, in situ observations were available at one site only, and the near-surface and root-zone results were very similar at this site. These results suggest that, in addition to the well-reported improvements in SMshort, assimilating a sufficiently long soil moisture data record can also improve the model representation of important long-term events, such as droughts. The improved agreement between the modeled and in situ SMseas is harder to interpret, given that mean seasonal cycle errors are systematic, and systematic errors are not typically targeted by (bias-blind) data assimilation. Finally, the use of 1-year subsets of the AMSR-E and Catchment soil moisture for estimating the observation-bias correction (rescaling) parameters is investigated. It is concluded that when only 1 year of data are available, the associated uncertainty in the rescaling parameters should not greatly reduce the average benefit gained from data assimilation, although locally and in extreme years there is a risk of increased errors.

scholarly journals A Data-Driven Approach for Daily Real-Time Estimates and Forecasts of Near-Surface Soil Moisture

2017 ◽  
Vol 18 (3) ◽  
pp. 837-843 ◽  
Author(s):  
Randal D. Koster ◽  
Rolf H. Reichle ◽  
Sarith P. P. Mahanama
Keyword(s):  
United States ◽  
Soil Moisture ◽  
Real Time ◽  
Surface Soil ◽  
Data Driven ◽  
Surface Soil Moisture ◽  
Near Surface ◽  
Time Estimates ◽  
Data Driven Approach ◽  
Global Surface

Abstract NASA’s Soil Moisture Active Passive (SMAP) mission provides global surface soil moisture retrievals with a revisit time of 2–3 days and a latency of 24 h. Here, to enhance the utility of the SMAP data, an approach is presented for improving real-time soil moisture estimates (nowcasts) and for forecasting soil moisture several days into the future. The approach, which involves using an estimate of loss processes (evaporation and drainage) and precipitation to evolve the most recent SMAP retrieval forward in time, is evaluated against subsequent SMAP retrievals themselves. The nowcast accuracy over the continental United States is shown to be markedly higher than that achieved with the simple yet common persistence approach. The accuracy of soil moisture forecasts, which rely on precipitation forecasts rather than on precipitation measurements, is reduced relative to nowcast accuracy but is still significantly higher than that obtained through persistence.

scholarly journals Influence of cracking clays on satellite estimated and model simulated soil moisture

2010 ◽  
Vol 14 (6) ◽  
pp. 979-990 ◽  
Author(s):  
Y. Y. Liu ◽  
J. P. Evans ◽  
M. F. McCabe ◽  
R. A. M. de Jeu ◽  
A. I. J. M. van Dijk ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Surface Temperature ◽  
Soil Properties ◽  
Surface Soil ◽  
Clay Soils ◽  
Soil Types ◽  
Soil Porosity ◽  
Surface Soil Moisture ◽  
Near Surface ◽  
Community Land Model

Abstract. Vertisols are clay soils that are common in the monsoonal and dry warm regions of the world. One of the characteristics of these soil types is to form deep cracks during periods of extended dry, resulting in significant variation of the soil and hydrologic properties. Understanding the influence of these varying soil properties on the hydrological behavior of the system is of considerable interest, particularly in the retrieval or simulation of soil moisture. In this study we compare surface soil moisture (θ in m3 m−3) retrievals from AMSR-E using the VUA-NASA (Vrije Universiteit Amsterdam in collaboration with NASA) algorithm with simulations from the Community Land Model (CLM) over vertisol regions of mainland Australia. For the three-year period examined here (2003–2005), both products display reasonable agreement during wet periods. During dry periods however, AMSR-E retrieved near surface soil moisture falls below values for surrounding non-clay soils, while CLM simulations are higher. CLM θ are also higher than AMSR-E and their difference keeps increasing throughout these dry periods. To identify the possible causes for these discrepancies, the impacts of land use, topography, soil properties and surface temperature used in the AMSR-E algorithm, together with vegetation density and rainfall patterns, were investigated. However these do not explain the observed θ responses. Qualitative analysis of the retrieval model suggests that the most likely reason for the low AMSR-E θ is the increase in soil porosity and surface roughness resulting from cracking of the soil. To quantitatively identify the role of each factor, more in situ measurements of soil properties that can represent different stages of cracking need to be collected. CLM does not simulate the behavior of cracking soils, including the additional loss of moisture from the soil continuum during drying and the infiltration into cracks during rainfall events, which results in overestimated θ when cracks are present. The hydrological influence of soil physical changes are expected to propagate through the modeled system, such that modeled infiltration, evaporation, surface temperature, surface runoff and groundwater recharge should be interpreted with caution over these soil types when cracks might be present. Introducing temporally dynamic roughness and soil porosity into retrieval algorithms and adding a "cracking clay" module into models are expected to improve the representation of vertisol hydrology.

scholarly journals Assimilation of Disaggregated Microwave Soil Moisture into a Hydrologic Model Using Coarse-Scale Meteorological Data

2006 ◽  
Vol 7 (6) ◽  
pp. 1308-1322 ◽  
Author(s):  
O. Merlin ◽  
A. Chehbouni ◽  
G. Boulet ◽  
Y. Kerr
Keyword(s):  
Soil Moisture ◽  
Surface Soil ◽  
Meteorological Data ◽  
Microwave Radiometer ◽  
Hydrologic Model ◽  
Observation Time ◽  
Coupling Scheme ◽  
Surface Soil Moisture ◽  
Coarse Scale ◽  
Near Surface

Abstract Near-surface soil moisture retrieved from Soil Moisture and Ocean Salinity (SMOS)-type data is downscaled and assimilated into a distributed soil–vegetation–atmosphere transfer (SVAT) model with the ensemble Kalman filter. Because satellite-based meteorological data (notably rainfall) are not currently available at finescale, coarse-scale data are used as forcing in both the disaggregation and the assimilation. Synthetic coarse-scale observations are generated from the Monsoon ‘90 data by aggregating the Push Broom Microwave Radiometer (PBMR) pixels covering the eight meteorological and flux (METFLUX) stations and by averaging the meteorological measurements. The performance of the disaggregation/assimilation coupling scheme is then assessed in terms of surface soil moisture and latent heat flux predictions over the 19-day period of METFLUX measurements. It is found that the disaggregation improves the assimilation results, and vice versa, the assimilation of the disaggregated microwave soil moisture improves the spatial distribution of surface soil moisture at the observation time. These results are obtainable regardless of the spatial scale at which solar radiation, air temperature, wind speed, and air humidity are available within the microwave pixel and for an assimilation frequency varying from 1/1 day to 1/5 days.

Sign in / Sign up

Export Citation Format

Share Document