In this study, dynamic hardness tests on solid and engineered wood flooring specimens of Eucalyptus globulus Labill. and Eucalyptus grandis W. Hill ex Maiden hardwoods were performed because nowadays, these fast-growing hardwoods are still scarcely employed for this use. Furthermore, another two examples of hardwood commonly applied on wood flooring, Quercus robur L. and Hymenaea courbaril L., were also tested. To compare their properties, a dynamic impact hardness test based on the impact of steel balls, with several diameters, and drop heights was developed. Accordingly, 120 solid wood flooring specimens and 120 engineering wood flooring specimens were producing with these four hardwood species. Dynamic impact tests were made with three steel balls of different diameters (30–40–50 mm), and they were carried out from five different drop heights (0.60–0.75–0.90–1.05–1.20 m). The impact of the steel ball drew the size of the footprint on the surface and this mark was measured with a digital caliper for both dimensions, diameter and depth, as footprint diameter (FD) and indentation depth (ID). Data from 3000 samples, corresponding to 120 different individual groups (4 species × 3 ball diameters × 5 drop height × 2 floor type) were analyzed. Results indicated that the variability of ID (CV between 19.25–25.61%) is much greater than the values achieved for FD (CV between 6.72–7.91%). Regarding the fast-growing hardwood species tested, E. globulus showed a similar behavior to traditional hardwood applied on wood flooring in Europe, Q. robur, and it could be a promising growth in the flooring industry. However, E. grandis showed the worst values compared to traditional hardwood in all test configurations.
Investigation of Shear Strength of Engineered Wood Flooring Bonded with PUR by Response Surface Methodology
