Tearing and Rheological Properties of Fully Biodegradable Poly(Lactic Acid)/Poly(Ethylene Glutaric-Co-Terephthalate) Copolyester Blends

2012 ◽  
Vol 52 (5) ◽  
pp. 674-684 ◽  
Author(s):  
Li Cui ◽  
Zhi-Chao Wang ◽  
Ping Zhu
Keyword(s):  
Lactic Acid ◽  
Rheological Properties ◽  
Poly Lactic Acid ◽  
Biodegradable Poly ◽  
Poly Ethylene

scholarly journals Plasticized Biodegradable Poly(lactic acid) Based Composites Containing Cellulose in Micro- and Nanosize

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Katalin Halász ◽  
Levente Csóka
Keyword(s):  
Lactic Acid ◽  
Microcrystalline Cellulose ◽  
Composite Films ◽  
Poly Lactic Acid ◽  
Twin Screw Extrusion ◽  
Scanning Calorimetry ◽  
Screw Extrusion ◽  
Twin Screw ◽  
Biodegradable Poly ◽  
Poly Ethylene

The aim of this work was to study the characteristics of thermal processed poly(lactic acid) composites. Poly(ethylene glycol) (PEG400), microcrystalline cellulose (MCC), and ultrasound-treated microcrystalline cellulose (USMCC) were used in 1, 3, and 5 weight percents to modify the attributes of PLA matrix. The composite films were produced by twin screw extrusion followed by film extrusion. The manufactured PLA-based films were characterized by tensile testing, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), wide angle X-ray diffraction (WAXD), and degradation test.

Effect of chain extender on morphologies and properties of PBAT/PLA composites

2021 ◽  
pp. 089270572110514
Author(s):  
Jing Sun ◽  
Anrong Huang ◽  
Shanshan Luo ◽  
Min Shi ◽  
Jiling Song ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Rheological Properties ◽  
Chain Extender ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Elongation At Break ◽  
Increasing Trend ◽  
Biodegradable Poly ◽  
Interfacial Compatibility

Biodegradable poly(butylene adipate-co-terephthalate)/poly(lactic acid) (PBAT/PLA) composites were prepared by melt blending, and chain extender was used to improve the compatibility of PBAT/PLA blends through the chemical reaction. The influence of PLA and chain extender contents on mechanical properties, morphology, and rheological properties of PBAT/PLA composites was systematically investigated. The results revealed that the Young’s modulus and stress values gradually increased under the same strain, whereas the elongation at break decreased with the increase of chain extender content for PBAT/PLA (80/20) composites. Noteworthy, the presence of chain extender improves the interfacial compatibility between PLA and PBAT phases. At the chain extender content of 0.4, 0.6, and 0.8 wt.%, the extensional viscosity of the composites exhibited an increasing trend, whereas an obvious strain-hardening phenomenon emerged in the uniaxial extensional curves.

The effect of poly(ethylene glycol) as plasticizer in blends of poly(lactic acid) and poly(butylene succinate)

2015 ◽  
Vol 133 (8) ◽  
pp. n/a-n/a ◽  
Author(s):  
Weraporn Pivsa-Art ◽  
Kazunori Fujii ◽  
Keiichiro Nomura ◽  
Yuji Aso ◽  
Hitomi Ohara ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Ethylene Glycol ◽  
Poly Lactic Acid ◽  
Poly Ethylene Glycol ◽  
Butylene Succinate ◽  
Poly Ethylene

Immobilization of trypsin onto poly(ethylene terephthalate)/poly(lactic acid) nonwoven nanofiber mats

2015 ◽  
Vol 104 ◽  
pp. 48-56 ◽  
Author(s):  
Teresa R. Silva ◽  
Daniela P. Rodrigues ◽  
Jorge M.S. Rocha ◽  
M. Helena Gil ◽  
Susana C.S. Pinto ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Ethylene Terephthalate ◽  
Poly Lactic Acid ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Nanofiber Mats

Biodegradable Microfluidic Device: Hydrolysis, Decomposition and Surface Modification

2010 ◽  
Vol 447-448 ◽  
pp. 755-759 ◽  
Author(s):  
Jia En Low ◽  
Wei Xiang Koh ◽  
Joon Kit Lai ◽  
Yan Jie Lee ◽  
Xu Li ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Microfluidic Device ◽  
Ph Value ◽  
Blood Compatibility ◽  
Blood Clot ◽  
Hydrophobic Surface ◽  
Poly Lactic Acid ◽  
Water Contact ◽  
Chemical Grafting ◽  
Poly Ethylene

Poly(lactic acid) (PLA) is a biodegradable and biocompatible aliphatic polyester whose lactic acid monomers are derived from renewable resources such as corn and sugar beet. As a thermal plastic it can be processed through compounding and injection. As such, we have developed a microfludic device using PLA aimed at blood dialysis application. To quantify the degradation of PLA, its hydrolysis at different pH value was studied. To study the bioresorbable property of these fabricated devices, its decomposition was tested by morphology observation and weight change measurements after embedding in soil under simulated environmental conditions. Upon contact with a hydrophobic surface, platelets and prothrombin are always activated to attach to the surface, resulting in blood clot. This would block the blood flow through the dialysis channels in the microfluidic device. To improve the hydrophilicity, hence the blood compatibility, chemical grafting of a hydrophilic polymer, poly(ethylene oxide) methacrylate (PEGmA), onto the surface of PLA microfluidic device was carried out and the changes in hydrophilicity was monitored through measuring the water contact angle. Our results indicate that chemical grafting of PEGmA significantly improves the hydrophilicity of the device surface.

Sign in / Sign up

Export Citation Format

Share Document