Power density analysis of an endoreversible closed Brayton cycle

2001 ◽  
Vol 22 (2) ◽  
pp. 95-104 ◽  
Author(s):  
J. Zheng ◽  
L. Chen ◽  
F. Sun ◽  
C. Wu
Keyword(s):  
Power Density ◽  
Brayton Cycle ◽  
Density Analysis

Performance comparison of an irreversible closed variable-temperature heat reservoir brayton cycle under maximum power density and maximum power conditions

2005 ◽  
Vol 219 (7) ◽  
pp. 559-565 ◽  
Author(s):  
L Chen ◽  
J Zheng ◽  
F Sun ◽  
C Wu
Keyword(s):  
Power Density ◽  
Heat Exchangers ◽  
Variable Temperature ◽  
Thermal Capacity ◽  
Maximum Power ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Maximum Power Density ◽  
Temperature Ratio ◽  
Temperature Heat

The power density is taken as an objective for performance analysis of an irreversible closed Brayton cycle coupled to variable-temperature heat reservoirs. The analytical formulas about the relationship between power density and working fluid temperature ratio (pressure ratio) are derived with the heat resistance losses in the hot- and cold-side heat exchangers, the irreversible compression and expansion losses in the compressor and turbine, and the effect of the finite thermal capacity rate of the heat reservoirs. The obtained results are compared with those results obtained by using the maximum power criterion. The influences of some design parameters, including the temperature ratio of the heat reservoirs, the effectivenesses of the heat exchangers between the working fluid and the heat reservoirs, and the efficiencies of the compressor and the turbine, on the maximum power density are provided by numerical examples, and the advantages and disadvantages of maximum power density design are analysed. The power plant design with maximum power density leads to a higher efficiency and smaller size. When the heat transfers between the working fluid and the heat reservoirs are carried out ideally and the thermal capacity rates of the heat reservoirs are infinite, the results of this article become similar to those obtained in the recent literature.

Power Density Analysis for a Regenerated Closed Brayton Cycle

2001 ◽  
Vol 08 (04) ◽  
pp. 377-391 ◽  
Author(s):  
Lingen Chen ◽  
Junlin Zheng ◽  
Fengrui Sun ◽  
Chih Wu
Keyword(s):  
Power Density ◽  
Heat Exchangers ◽  
Pressure Ratio ◽  
Maximum Power ◽  
Design Parameters ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Maximum Power Density ◽  
Recovery Coefficient ◽  
Advantages And Disadvantages

In this paper, the power density, defined as the ratio of power output to the maximum specific volume in the cycle, is set as the objective for performance analysis of an irreversible, regenerated and closed Brayton cycle coupled to constant-temperature heat reservoirs from the viewpoint of finite time thermodynamics (FTT) or entropy generation minimization (EGM). The analytical formulae about the relations between power density and pressure ratio are derived with the heat resistance losses in the hot- and cold-side heat exchangers and the regenerator, the irreversible compression and expansion losses in the compressor and turbine, and the pressure loss in the pipe. The results obtained are compared with those obtained by using the maximum power criterion. The influences of some design parameters, including the effectiveness of the regenerator, the temperature ratio of heat reservoirs, the effectivenesses of heat exchangers between working fluid and heat reservoirs, the efficiencies of the compressor and the turbine, and the pressure recovery coefficient, on the maximum power density are illustrated by numerical examples, and advantages and disadvantages of maximum power density design are analyzed. When heat transfers between working fluid and heat reservoirs are carried out ideally, the results of this paper coincide with those obtained in recent literature.

Sign in / Sign up

Export Citation Format

Share Document