Chemical Condensation of Phosphoramidates with Acids

1987 ◽  
Vol 30 (3-4) ◽  
pp. 744-744
Author(s):  
Makoto Watanabe
Science ◽  
1974 ◽  
Vol 186 (4166) ◽  
pp. 817-817 ◽  
Author(s):  
W. D. Metz

2010 ◽  
Vol 1272 ◽  
Author(s):  
Nils Salingue ◽  
Dominic Lingenfelser ◽  
Pavel Prunici ◽  
Hess Peter

AbstractOrganic/inorganic hybrids of silicon and their subsequent chemical modification are of interest for tailoring and structuring surfaces on the nanoscale. The formation of monolayers on hydroxylated silicon surfaces was employed to synthesize molecular dimethylsiloxane chains by wet-chemical condensation reactions, using dimethylmonochlorosilane as the precursor. The SiH group of the resulting dimethylsilyl termination could be selectively oxidized to the SiOH group, which opened the possibility of bonding another species. By repeating the condensation and oxidation cycle the stepwise growth of one-dimensional dimethylsiloxane chains was achieved. The ongoing chain growth was characterized by attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy, x-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (SE), and determination of the surface energy by contact-angle experiments.


2007 ◽  
Vol 22 (1) ◽  
pp. 26-34 ◽  
Author(s):  
P. Dibandjo ◽  
F. Chassagneux ◽  
L. Bois ◽  
C. Sigala ◽  
P. Miele

The influence of different borazinic precursors on mesoporous boron nitride synthesis by using a nanocasting process of a mesoporous CMK-3 carbon is presented. Two borazinic precursors, the tri(methylamino)borazine (MAB) and the tri(chloro)borazine (TCB), have been converted to boron nitride (BN) inside the mesopores of a CMK-3 carbon mesoporous template by using thermal or chemical polycondensation processes. Ordered mesoporous boron nitride with a specific surface area around 800 m2/g, a mesoporous volume around 0.6 cm3/g, and a pore-size distribution located at 6 nm in diameter was synthesized by thermal condensation of a molecular MAB precursor. In addition, chemical condensation of TCB led to a disordered mesoporous boron nitride.


2017 ◽  
Vol 19 (3) ◽  
pp. 223 ◽  
Author(s):  
A. Lesbayev ◽  
B. Elouadi ◽  
T. Borbotko ◽  
S. Manakov ◽  
G. Smagulova ◽  
...  

This paper presents an experimental study on the performance of shielding concrete with additives of magnetite nanoparticles. Two concretes with magnetite additives as well as one based concrete were tested. In order to achieve the high-performance concrete, all concrete mixes had a constant water/cement ratio of 0.45. In order to measure the mechanical properties, concrete samples were made in accordance with dimension such as 40 × 40 × 160 mm. But, for measurement of protective properties the concrete was made in accordance with dimension of rotary antennas such as 400 × 400 mm with a thickness of 10 mm. The nanoparticles Fe3O4 were synthesized by chemical condensation method. XRD have shown the presence of cubic structure of Fe3O4 spinel with crystallite size is equal to 130.0 Å. The TEM microphotograph shows that the Fe3O4 nanoparticles are spherical, the range of sizes is 12‒30 nm. The magnetic retardation suggests that the magnetite nanoparticles have superparamagnetic properties. This is explained by the fact that under the influence of external magnetic field, they are single-domain, in other words, they become uniformly magnetized throughout the volume. The additives of magnetite nanoparticles at a concentration of 0.5% mass have not a negative effect on flexural strength. The samples with additives of magnetite nanoparticles showed better shielding of microwave radiation in the frequency range from 0.7 GHz to 13 GHz. The maximum efficiency of suppression of electromagnetic disturbance is equal to 19.9 dB at a frequency of 1.5 GHz with a thickness of 10 mm.


2021 ◽  
Vol 15 (2) ◽  
pp. 299-306
Author(s):  
A. V. Emelianov ◽  
A. V. Eremin ◽  
V. E. Fortov

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3596
Author(s):  
Pamela Lemos Cruz ◽  
Natalja Kulagina ◽  
Grégory Guirimand ◽  
Johan-Owen De Craene ◽  
Sébastien Besseau ◽  
...  

Plant specialized metabolites are widely used in the pharmaceutical industry, including the monoterpene indole alkaloids (MIAs) vinblastine and vincristine, which both display anticancer activity. Both compounds can be obtained through the chemical condensation of their precursors vindoline and catharanthine extracted from leaves of the Madagascar periwinkle. However, the extensive use of these molecules in chemotherapy increases precursor demand and results in recurrent shortages, explaining why the development of alternative production approaches, such microbial cell factories, is mandatory. In this context, the precursor-directed biosynthesis of vindoline from tabersonine in yeast-expressing heterologous biosynthetic genes is of particular interest but has not reached high production scales to date. To circumvent production bottlenecks, the metabolic flux was channeled towards the MIA of interest by modulating the copy number of the first two genes of the vindoline biosynthetic pathway, namely tabersonine 16-hydroxylase and tabersonine-16-O-methyltransferase. Increasing gene copies resulted in an optimized methoxylation of tabersonine and overcame the competition for tabersonine access with the third enzyme of the pathway, tabersonine 3-oxygenase, which exhibits a high substrate promiscuity. Through this approach, we successfully created a yeast strain that produces the fourth biosynthetic intermediate of vindoline without accumulation of other intermediates or undesired side-products. This optimization will probably pave the way towards the future development of yeast cell factories to produce vindoline at an industrial scale.


Sign in / Sign up

Export Citation Format

Share Document