Interactions of persistent slip bands with a grain boundary on the common primary slip plane in a copper bicrystal

2000 ◽  
Vol 80 (3) ◽  
pp. 149-156 ◽  
Author(s):  
Z.F. Zhang ◽  
Z.G. Wang
Author(s):  
N. Y. Jin

Localised plastic deformation in Persistent Slip Bands(PSBs) is a characteristic feature of fatigue in many materials. The dislocation structure in the PSBs contains regularly spaced dislocation dipole walls occupying a volume fraction of around 10%. The remainder of the specimen, the inactive "matrix", contains dislocation veins at a volume fraction of 50% or more. Walls and veins are both separated by regions in which the dislocation density is lower by some orders of magnitude. Since the PSBs offer favorable sites for the initiation of fatigue cracks, the formation of the PSB wall structure is of great interest. Winter has proposed that PSBs form as the result of a transformation of the matrix structure to a regular wall structure, and that the instability occurs among the broad dipoles near the center of a vein rather than in the hard shell surounding the vein as argued by Kulmann-Wilsdorf.


Author(s):  
M.J. Kim ◽  
Y.L. Chen ◽  
R.W. Carpenter ◽  
J.C. Barry ◽  
G.H. Schwuttke

The structure of grain boundaries (GBs) in metals, semiconductors and ceramics is of considerable interest because of their influence on physical properties. Progress in understanding the structure of grain boundaries at the atomic level has been made by high resolution electron microscopy (HREM) . In the present study, a Σ=13, (510) <001>-tilt grain boundary in silicon was characterized by HREM in conjunction with digital image processing and computer image simulation techniques.The bicrystals were grown from the melt by the Czochralski method, using preoriented seeds. Specimens for TEM observations were cut from the bicrystals perpendicular to the common rotation axis of pure tilt grain boundary, and were mechanically dimpled and then ion-milled to electron transparency. The degree of misorientation between the common <001> axis of the bicrystal was measured by CBED in a Philips EM 400ST/FEG: it was found to be less than 1 mrad. HREM was performed at 200 kV in an ISI-002B and at 400 kv in a JEM-4000EX.


2018 ◽  
Vol 83 (02) ◽  
pp. 293-313 ◽  
Author(s):  
Shyh-Lung Hwang ◽  
Pouyan Shen ◽  
Hao-Tsu Chu ◽  
Tzen-Fu Yui ◽  
Maria-Euginia Varela ◽  
...  

AbstractTsangpoite, ideally Ca5(PO4)2(SiO4), the hexagonal polymorph of silicocarnotite, and matyhite, ideally Ca9(Ca0.5□0.5)Fe(PO4)7, the Fe-analogue of Ca-merrillite, were identified from the D'Orbigny angrite meteorite by electron probe microanalysis, electron microscopy and micro-Raman spectroscopy. On the basis of electron diffraction, the symmetry of tsangpoite was shown to be hexagonal,P63/morP63, witha= 9.489(4) Å,c= 6.991(6) Å,V= 545.1(6) Å3andZ= 2 for 12 oxygen atoms per formula unit, and that of matyhite was shown to be trigonal,R3c, witha= 10.456 (7) Å,c= 37.408(34) Å,V= 3541.6 (4.8) Å3andZ= 6 for 28 oxygen atoms per formula unit. On the basis of their constant association with the grain-boundary assemblage: Fe sulfide + ulvöspinel + Al–Ti-bearing hedenbergite + fayalite–kirschsteinite intergrowth, the formation of tsangpoite and matyhite, along with kuratite (the Fe-analogue of rhönite), can be readily rationalised as crystallisation from residue magmas at the final stage of the D'Orbigny meteorite formation. Alternatively, the close petrographic relations between tsangpoite/matyhite and the resorbed Fe sulfide rimmed by fayalite + kirschsteinite symplectite, such as the nucleation of tsangpoite in association with magnetite ± other phases within Fe sulfide and the common outward growth of needle-like tsangpoite or plate-like matyhite from the fayalite–kirschsteinite symplectic rim of Fe sulfide into hedenbergite, infer that these new minerals and the grain-boundary assemblage might represent metasomatic products resulting from reactions between an intruding metasomatic agent and the porous olivine–plagioclase plate + fayalite-kirschsteinite overgrowth + augite + Fe sulfide aggregates. Still further thermochemical and kinetics evidence is required to clarify the exact formation mechanisms/conditions of the euhedral tsangpoite, matyhite and kuratite at the grain boundary of the D'Orbigny angrite.


1982 ◽  
Vol 30 (3) ◽  
pp. 711-718 ◽  
Author(s):  
O.B Pedersen ◽  
A.T Winter

Author(s):  
Alexander Victorovich Gonchar ◽  
Konstantin Vladimirovich Kurashkin ◽  
Olga Vyacheslavovna Andreeva ◽  
Maxim Sergeevich Anosov ◽  
Vyacheslav Alexandrovich Klyushnikov

2016 ◽  
Vol 258 ◽  
pp. 526-529 ◽  
Author(s):  
Veronika Mazánová ◽  
Milan Heczko ◽  
Ivo Kuběna ◽  
Jaroslav Polák

Two fatigued materials with f.c.c. lattice, i.e. pure polycrystalline copper and austenitic Sanicro 25 stainless steel, were subjected to the study of the persistent slip markings (PSMs) developed on the surface of the suitably oriented grains. They were observed using scanning electron microscopy (SEM) and thin surface FIB lamellae were prepared and studied by transmission electron microscopy (TEM). The aim was to correlate the specimen surface profile with the underlying internal dislocation structure. The localization of the intensive cyclic slip into persistent slip bands (PSBs) of the material was observed and associated with the PSMs on the specimen surface. Extrusions, intrusions and the dislocation structure appertaining to them were analysed, documented and discussed in relation to the models of fatigue crack initiation.


Sign in / Sign up

Export Citation Format

Share Document