Comparative assessment of modeling and experimental data of ammonia removal from pre-digested chicken manure

2020 ◽  
Vol 55 (11) ◽  
pp. 1333-1338
Author(s):  
Goksen Pekyavas ◽  
R. Kaan Dereli ◽  
Cigdem Yangin-Gomec
2007 ◽  
Vol 55 (11) ◽  
pp. 65-71 ◽  
Author(s):  
R.K.X. Bastos ◽  
E.N. Rios ◽  
F.L. Dornelas ◽  
F.A.L. Assunção ◽  
L.E. Nascimento

Ammonia and phosphorus removal were evaluated over four years monitoring of an experimental wastewater treatment plant in Brazil: initially a UASB reactor (real scale) + three shallow polishing ponds (pilot scale), afterwards a UASB + submerged aerated biofilter (BF) (real scale) + the same pond series. Shallow ponds (h < 0.90m) provided considerable ammonia removal, but phosphorus removal was somewhat poorer. An equation was derived for the estimation of ammonia pond effluent, based on the same assumptions of the well known Pano and Middlebrooks model. According to the experimental data, an effluent suitable for aquaculture should be achieved with retention time of 25 days.


2019 ◽  
Vol 126 ◽  
pp. 00028
Author(s):  
Grigory Tatarov ◽  
Vladimir Kurdumov ◽  
Ivan Sharonov

The studies performed clearly show the distribution of soil pressure on the working surface of the opener and allow a comparative assessment based on the experimental data obtained.


2010 ◽  
Vol 101 (16) ◽  
pp. 6368-6373 ◽  
Author(s):  
Fatma Abouelenien ◽  
Wataru Fujiwara ◽  
Yuzaburo Namba ◽  
Maria Kosseva ◽  
Naomichi Nishio ◽  
...  

2017 ◽  
Vol 241 ◽  
pp. 332-339 ◽  
Author(s):  
Cigdem Yangin-Gomec ◽  
Goksen Pekyavas ◽  
Tugba Sapmaz ◽  
Sevcan Aydin ◽  
Bahar Ince ◽  
...  

2020 ◽  
Vol 10 (21) ◽  
pp. 7825
Author(s):  
Yevhenii Shapovalov ◽  
Sergey Zhadan ◽  
Günther Bochmann ◽  
Anatoly Salyuk ◽  
Volodymyr Nykyforov

Providing anaerobic digestion is a prospective technology for utilizing organic waste, however, for waste with a high content of nitrogen such as manure, dilution is necessary to decrease the ammonia inhibition effect which leads to the production of a huge effluent amount which is difficult to use. Dry anaerobic digestion has some advantages such as reduced reactor volume, higher volumetric methane yield, lower energy consumption for heating, less wastewater production, and lower logistic costs for fertilizers. These factors generate interest in using it for treatment of even high-nitrogen substrates. The purpose of this work was to analyze different dry anaerobic digestion technologies, the features of dry anaerobic digestion, laboratory studies on chicken manure dry anaerobic digestion, and methods of reducing inhibitors’ effects. Nowadays, there are no dry anaerobic industrial plants working on chicken manure. However, studies on dry anaerobic digestion of chicken manure have proven the possibility of methane production under fermentation of chicken manure with high total solids content, but the process has been described as being unstable. Co-fermentation, ammonium/ammonia removal, and adaptation of the microbial consortium have been used to decrease the effect of ammonia inhibition. A prospective way for ammonia concentration control is absorption using a non-volatile sorbent located in the reactor. It decreases ammonia content during wet anaerobic digestion by 33% and it is characterized by having a positive economic effect. Therefore, dry anaerobic fermentation of chicken manure is possible, but there is still no efficient way to provide it. The results of this article should be helpful in the selection of anaerobic digestion technology for treating chicken manure.


2021 ◽  
Vol 346 ◽  
pp. 01011
Author(s):  
Aleksej Antimonov ◽  
Sergej Poljanskij ◽  
Nadezhda Pushkareva

A brief overview of methods for cutting round bars and pipes is presented, their main advantages, disadvantages and field of application are considered. It is proposed to use the effect of fatigue fracture for round bars and pipes breaking. The task is to study this process under the action of cyclic loads. The possibility of applying the known provisions of calculating theory of strength analysis for low-cycle fatigue for this process is tested. A comparative assessment of theoretical and experimental data is given and their significant difference is established. New calculated dependences are proposed, which are in good agreement with the experimental data. A theoretical assessment of the productivity of the process of round bars and pipes breaking by the method of cyclic circular bending was carried out using new results and various options for the design of a device for breaking were considered with an analysis of the features of their operation. Based on the results of the analysis, a variant of the device for the implementation of a continuous process of breaking the pointed ends of thick-walled fuel pipes during drawing in coils and a diagram of the mechanism for breaking the ends of the pipe with its supply from the coil were selected. Samples of pipes obtained by brittle cyclic bending are presented.


2020 ◽  
Vol 146 ◽  
pp. 1021-1030 ◽  
Author(s):  
Patrice Ramm ◽  
Christian Abendroth ◽  
Adriel Latorre-Pérez ◽  
Christiane Herrmann ◽  
Stefan Sebök ◽  
...  

2018 ◽  
Vol 80 (4) ◽  
Author(s):  
Zawawi Daud ◽  
Mahmoud Hijab Abubakar ◽  
Ab Aziz Abdul Latiff ◽  
Halizah Awang ◽  
Zulkifli Ahmad ◽  
...  

Landfills generate leachate that contains elevated concentration of contaminants and is hazardous to human health and the ecosystem. In this study, the mixture of granular feldspar and cockle shells was investigated for remediation of COD and ammonia from landfill leachate. All adsorbent media were sieved to a particle size between 2.00 and 3.35 mm. The results revealed that the optimum mixing ratio of feldspar and cockle shells was 20:20, shaking speed was 150 rpm, pH level was 6, shaking time was 120 min, and dosage was 30 g. The adsorption isotherm analysis reveals that the Langmuir isotherm yielded the best fit to experimental data as compared to the Freundlich isotherm. The media produce encouraging results and can potentially be used as a good and sustainable adsorbent.


Author(s):  
A. Gómez ◽  
P. Schabes-Retchkiman ◽  
M. José-Yacamán ◽  
T. Ocaña

The splitting effect that is observed in microdiffraction pat-terns of small metallic particles in the size range 50-500 Å can be understood using the dynamical theory of electron diffraction for the case of a crystal containing a finite wedge. For the experimental data we refer to part I of this work in these proceedings.


Sign in / Sign up

Export Citation Format

Share Document