scholarly journals Absence of microtubule sliding and an analysis of spindle formation and elongation in isolated mitotic spindles from the yeast Saccharomyces cerevisiae.

1982 ◽  
Vol 94 (2) ◽  
pp. 341-349 ◽  
Author(s):  
S M King ◽  
J S Hyams ◽  
A Luba
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Spindles ◽  
Microtubule Organization ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Formation ◽  
Detailed Model ◽  
Thin Sections ◽  
Gold Thioglucose

Mitotic spindles were isolated from a cell division cycle mutant of the budding yeast Saccharomyces cerevisiae by the lysis of sphateroplasts on an air:buffer interface and were negatively stained with 1% gold thioglucose. Isolated spindles were incubated under conditions which promoted the sliding disintegration of parallel preparations of Tetrahymena axonemes, namely the addition of ATP to 20 microM. In no experiment was a corresponding change in microtubule organization of the spindle observed even when spindles were first pretreated with either 1-10 microgram/ml trypsin or 0.2-2% Triton X-100. During these experiments a number of spindles were isolated from cells that had passed through the imposed temperature block, and from the images obtained a detailed model of spindle formation and elongation has been constructed. Two sets of microtubules, one from each spindle pole body (SPB), completely interdigitate to form a continuous bundle, and a series of discontinuous microtubules are then nucleated by each SPB. As the spindle elongates, the number of microtubules continuous between the two SPBs decreases until, at a length of 4 micrometer, only one remains. The spindle, composed of only one microtubule, continues to elongate until it reaches the maximal nuclear dimension of 8 micrometer. The data obtained from negatively stained preparations have been verified in thin sections of wild-type cells. We suggest that, as in the later stages of mitosis only one microtubule is involved in the separation of the spindle poles, the microtubular spindle in S. cerevisiae is not a force-generating system but rather acts as a regulatory mechanism controlling the rate of separation.

scholarly journals Interdependency of Fission Yeast Alp14/TOG and Coiled Coil Protein Alp7 in Microtubule Localization and Bipolar Spindle Formation

2004 ◽  
Vol 15 (4) ◽  
pp. 1609-1622 ◽  
Author(s):  
Masamitsu Sato ◽  
Leah Vardy ◽  
Miguel Angel Garcia ◽  
Nirada Koonrugsa ◽  
Takashi Toda
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Mitotic Spindles ◽  
Microtubule Organization ◽  
Spindle Formation ◽  
Bipolar Spindle ◽  
C Terminus ◽  
Step Model

The Dis1/TOG family plays a pivotal role in microtubule organization. In fission yeast, Alp14 and Dis1 share an essential function in bipolar spindle formation. Here, we characterize Alp7, a novel coiled-coil protein that is required for organization of bipolar spindles. Both Alp7 and Alp14 colocalize to the spindle pole body (SPB) and mitotic spindles. Alp14 localization to these sites is fully dependent upon Alp7. Conversely, in the absence of Alp14, Alp7 localizes to the SPBs, but not mitotic spindles. Alp7 forms a complex with Alp14, where the C-terminal region of Alp14 interacts with the coiled-coil domain of Alp7. Intriguingly, this Alp14 C terminus is necessary and sufficient for mitotic spindle localization. Overproduction of either full-length or coiled-coil region of Alp7 results in abnormal V-shaped spindles and stabilization of interphase microtubules, which is induced independent of Alp14. Alp7 may be a functional homologue of animal TACC. Our results shed light on an interdependent relationship between Alp14/TOG and Alp7. We propose a two-step model that accounts for the recruitment of Alp7 and Alp14 to the SPB and microtubules.

scholarly journals Spindle pole body separation in Saccharomyces cerevisiae requires dephosphorylation of the tyrosine 19 residue of Cdc28.

1996 ◽  
Vol 16 (11) ◽  
pp. 6385-6397 ◽  
Author(s):  
H H Lim ◽  
P Y Goh ◽  
U Surana
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Budding Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Spindles ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Pole Bodies ◽  
M Phase ◽  
Yeast Homolog ◽  
Bipolar Spindles

In eukaryotes, mitosis requires the activation of cdc2 kinase via association with cyclin B and dephosphorylation of the threonine 14 and tyrosine 15 residues. It is known that in the budding yeast Saccharomyces cerevisiae, a homologous kinase, Cdc28, mediates the progression through M phase, but it is not clear what specific mitotic function its activation by the dephosphorylation of an equivalent tyrosine (Tyr-19) serves. We report here that cells expressing cdc28-E19 (in which Tyr-19 is replaced by glutamic acid) perform Start-related functions, complete DNA synthesis, and exhibit high levels of Clb2-associated kinase activity but are unable to form bipolar spindles. The failure of these cells to form mitotic spindles is due to their inability to segregate duplicated spindle pole bodies (SPBs), a phenotype strikingly similar to that exhibited by a previously reported mutant defective in both kinesin-like motor proteins Cin8 and Kip1. We also find that the overexpression of SWE1, the budding-yeast homolog of wee1, also leads to a failure to segregate SPBs. These results imply that dephosphorylation of Tyr-19 is required for the segregation of SPBs. The requirement of Tyr-19 dephosphorylation for spindle assembly is also observed under conditions in which spindle formation is independent of mitosis, suggesting that the involvement of Cdc28/Clb kinase in SPB separation is direct. On the basis of these results, we propose that one of the roles of Tyr-19 dephosphorylation is to promote SPB separation.

scholarly journals gamma-Tubulin-like Tub4p of Saccharomyces cerevisiae is associated with the spindle pole body substructures that organize microtubules and is required for mitotic spindle formation.

1996 ◽  
Vol 134 (2) ◽  
pp. 429-441 ◽  
Author(s):  
A Spang ◽  
S Geissler ◽  
K Grein ◽  
E Schiebel
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Mitotic Checkpoint ◽  
Spindle Pole ◽  
Checkpoint Control ◽  
Microtubule Organizing Center ◽  
Microtubule Organization ◽  
Spindle Formation ◽  
Pole Body ◽  
Gamma Tubulin

Tub4p is a novel tubulin in Saccharomyces cerevisiae that most closely resembles gamma-tubulin. We report in this manuscript that the essential Tub4p is associated with the inner and outer plaques of the yeast microtubule organizing center, the spindle pole body (SPB). These SPB substructures are involved in the attachment of the nuclear and cytoplasmic microtubules, respectively (Byers, B., and L. Goetsch. 1975. J. Bacteriol. 124:511-523). Study of a temperature sensitive tub4-1 allele revealed that TUB4 has essential functions in microtubule organization. Remarkably, SPB duplication and separation are not impaired in tub4-1 cells incubated at the nonpermissive temperature. However, SPBs from such cells contain less or misdirected nuclear microtubules. Further analysis revealed that tub4-1 cells are able to assemble a short bipolar spindle, suggesting that the defect in microtubule organization occurs after spindle formation. A role of Tub4p in microtubule organization is further suggested by an increase in chromosome loss in tub4-1 cells. In addition, cell cycle arrest and survival of tub4-1 cells is dependent on the mitotic checkpoint control gene BUB2 (Hoyt, M.A., L. Totis, B.T. Roberts. 1991. Cell. 66:507-517), one of the cell's monitors of spindle integrity.

Chromatin behaviour during the mitotic cell cycle of Saccharomyces cerevisiae

1977 ◽  
Vol 24 (1) ◽  
pp. 81-93
Author(s):  
C.N. Gordon
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Nuclear Division ◽  
Mitotic Cell ◽  
Spindle Pole ◽  
Chromosomal Distribution ◽  
Yeast Saccharomyces Cerevisiae ◽  
Thin Sections ◽  
Daughter Cells ◽  
Spindle Pole Bodies ◽  
Direct Attachment

Chromatin behaviour during the cell division cycle of the yeast Saccharomyces cerevisiae has been investigated in cells which have been depleted of 90% of their RNA by digestion with ribonuclease. Removal of large amounts of RNA from the yeast nucleus before treatment of the cells with heavy metal fixatives and stains permits chromatin to be visualized with extreme clarity in thin sections of cells processed for electron microscopy by conventional procedures. Spindle pole bodies were also visualized by this treatment, although the associated microtubules were not. Chromatin is dispersed during interphase and occupies the non-nucleolar region of the nucleus which is known to be Feulgen-positive from light microscopy. Because spindle microtubules are not visualized, direct attachment of microtubules to chromatin fibrils could not be verified. However, chromatin was not attached directly to the spindle pole bodies and kinetochore differentiations were not observed in the nucleoplasm. During nuclear division chromatin remains dispersed and does not condense into discrete chromatids. As the nucleus expands into the bud, chromosomal distribution to the daughter cells is thought to result from the separation of the poles of the spindle apparatus with attached chromatin fibrils. However, that such distribution is occurring as the nucleus elongates is not obvious until an advanced stage of nuclear division is reached and partition of the nucleus is nearly complete. Thus, no aggregation of chromatin into metaphase or anaphase plates occurs and the appearance of chromatin during mitosis is essentially the same as in interphase. These observations indicate that the marked changes in the topological structure of chromatin which characterize mitosis in the higher eukaryotes do not occur in S. cerevisiae.

scholarly journals Relationship of actin and tubulin distribution to bud growth in wild-type and morphogenetic-mutant Saccharomyces cerevisiae.

1984 ◽  
Vol 98 (3) ◽  
pp. 934-945 ◽  
Author(s):  
A E Adams ◽  
J R Pringle
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Spindle Pole Body ◽  
Neck Region ◽  
Spindle Pole ◽  
Wild Type ◽  
Active Growth ◽  
Yeast Saccharomyces Cerevisiae ◽  
The One ◽  
Relationship Of

The distribution of actin in wild-type cells and in morphogenetic mutants of the budding yeast Saccharomyces cerevisiae was explored by staining cells with fluorochrome-labeled phallotoxins after fixing and permeabilizing the cells by several methods. The actin appeared to be localized in a set of cortical spots or patches, as well as in a network of cytoplasmic fibers. Bundles of filaments that may possibly correspond to the fibers visualized by fluorescence were observed with the electron microscope. The putative actin spots were concentrated in small and medium-sized buds and at what were apparently the sites of incipient bud formation on unbudded cells, whereas the putative actin fibers were generally oriented along the long axes of the mother-bud pairs. In several morphogenetic mutants that form multiple, abnormally elongated buds, the actin patches were conspicuously clustered at the tips of most buds, and actin fibers were clearly oriented along the long axes of the buds. There was a strong correlation between the occurrence of active growth at particular bud tips and clustering of actin spots at those same tips. Near the end of the cell cycle in wild-type cells, actin appeared to concentrate (as a cluster of spots or a band) in the neck region connecting the mother cell to its bud. Observations made using indirect immunofluorescence with a monoclonal anti-yeast-tubulin antibody on the morphogenetic mutant cdc4 (which forms multiple, abnormally elongated buds while the nuclear cycle is arrested) revealed the surprising occurrence of multiple bundles of cytoplasmic microtubules emanating from the one duplicated spindle-pole body per cell. It seems that most or all of the buds contain one or more of these bundles of microtubules, which often can be seen to extend to the very tips of the buds. These observations are consistent with the hypotheses that actin, tubulin, or both may be involved in the polarization of growth and localization of cell-wall deposition that occurs during the yeast cell cycle.

Centromere clustering is a major determinant of yeast interphase nuclear organization

2000 ◽  
Vol 113 (11) ◽  
pp. 1903-1912 ◽  
Author(s):  
Q.W. Jin ◽  
J. Fuchs ◽  
J. Loidl
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Nuclear Organization ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Yeast Saccharomyces Cerevisiae ◽  
Genome Separation ◽  
Pole Body ◽  
Opposite Pole ◽  
Somatic Pairing ◽  
Higher Eukaryotes

During interphase in the budding yeast, Saccharomyces cerevisiae, centromeres are clustered near one pole of the nucleus as a rosette with the spindle pole body at its hub. Opposite to the centromeric pole is the nucleolus. Chromosome arms extend outwards from the centromeric pole and are preferentially directed towards the opposite pole. Centromere clustering is reduced by the ndc10 mutation, which affects a kinetochore protein, and by the microtubule poison nocodazole. This suggests that clustering is actively maintained or enforced by the association of centromeres with microtubules throughout interphase. Unlike the Rabl-orientation known from many higher eukaryotes, centromere clustering in yeast is not only a relic of anaphase chromosome polarization, because it can be reconstituted without the passage of cells through anaphase. Within the rosette, homologous centromeres are not arranged in a particular order that would suggest somatic pairing or genome separation.

scholarly journals A highly divergent gamma-tubulin gene is essential for cell growth and proper microtubule organization in Saccharomyces cerevisiae.

1995 ◽  
Vol 131 (6) ◽  
pp. 1775-1788 ◽  
Author(s):  
S G Sobel ◽  
M Snyder
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Growth ◽  
Yeast Cell ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Predicted Amino Acid Sequence ◽  
Nuclear Staining ◽  
Microtubule Organization ◽  
Cytoplasmic Microtubule ◽  
Gamma Tubulin

A Saccharomyces cerevisiae gamma-tubulin-related gene, TUB4, has been characterized. The predicted amino acid sequence of the Tub4 protein (Tub4p) is 29-38% identical to members of the gamma-tubulin family. Indirect immunofluorescence experiments using a strain containing an epitope-tagged Tub4p indicate that Tub4p resides at the spindle pole body throughout the yeast cell cycle. Deletion of the TUB4 gene indicates that Tub4p is essential for yeast cell growth. Tub4p-depleted cells arrest during nuclear division; most arrested cells contain a large bud, replicated DNA, and a single nucleus. Immunofluorescence and nuclear staining experiments indicate that cells depleted of Tub4p contain defects in the organization of both cytoplasmic and nuclear microtubule arrays; such cells exhibit nuclear migration failure, defects in spindle formation, and/or aberrantly long cytoplasmic microtubule arrays. These data indicate that the S. cerevisiae gamma-tubulin protein is an important SPB component that organizes both cytoplasmic and nuclear microtubule arrays.

scholarly journals The Role of Actin in Spindle Orientation Changes during the Saccharomyces cerevisiae Cell Cycle

1999 ◽  
Vol 146 (5) ◽  
pp. 1019-1032 ◽  
Author(s):  
Chandra L. Theesfeld ◽  
Javier E. Irazoqui ◽  
Kerry Bloom ◽  
Daniel J. Lew
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Cortical Actin ◽  
Yeast Saccharomyces Cerevisiae ◽  
Daughter Cells ◽  
M Phase ◽  
Actin Cables

In the budding yeast Saccharomyces cerevisiae, the mitotic spindle must align along the mother-bud axis to accurately partition the sister chromatids into daughter cells. Previous studies showed that spindle orientation required both astral microtubules and the actin cytoskeleton. We now report that maintenance of correct spindle orientation does not depend on F-actin during G2/M phase of the cell cycle. Depolymerization of F-actin using Latrunculin-A did not perturb spindle orientation after this stage. Even an early step in spindle orientation, the migration of the spindle pole body (SPB), became actin-independent if it was delayed until late in the cell cycle. Early in the cell cycle, both SPB migration and spindle orientation were very sensitive to perturbation of F-actin. Selective disruption of actin cables using a conditional tropomyosin double-mutant also led to de- fects in spindle orientation, even though cortical actin patches were still polarized. This suggests that actin cables are important for either guiding astral microtubules into the bud or anchoring them in the bud. In addition, F-actin was required early in the cell cycle for the development of the actin-independent spindle orientation capability later in the cell cycle. Finally, neither SPB migration nor the switch from actin-dependent to actin-independent spindle behavior required B-type cyclins.

scholarly journals Saccharomyces cerevisiae MPS2Encodes a Membrane Protein Localized at the Spindle Pole Body and the Nuclear Envelope

1999 ◽  
Vol 10 (7) ◽  
pp. 2393-2406 ◽  
Author(s):  
Marı́a de la Cruz Muñoz-Centeno ◽  
Susan McBratney ◽  
Antonio Monterrosa ◽  
Breck Byers ◽  
Carl Mann ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Membrane Protein ◽  
Nuclear Envelope ◽  
Fluorescent Protein ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Yeast Saccharomyces Cerevisiae ◽  
Pole Body ◽  
Monopolar Spindle

The MPS2 (monopolar spindle two) gene is one of several genes required for the proper execution of spindle pole body (SPB) duplication in the budding yeast Saccharomyces cerevisiae ( Winey et al., 1991 ). We report here that the MPS2 gene encodes an essential 44-kDa protein with two putative coiled-coil regions and a hydrophobic sequence. Although MPS2 is required for normal mitotic growth, some null strains can survive; these survivors exhibit slow growth and abnormal ploidy. The MPS2 protein was tagged with nine copies of the myc epitope, and biochemical fractionation experiments show that it is an integral membrane protein. Visualization of a green fluorescent protein (GFP) Mps2p fusion protein in living cells and indirect immunofluorescence microscopy of 9xmyc-Mps2p revealed a perinuclear localization with one or two brighter foci of staining corresponding to the SPB. Additionally, immunoelectron microscopy shows that GFP-Mps2p localizes to the SPB. Our analysis suggests that Mps2p is required as a component of the SPB for insertion of the nascent SPB into the nuclear envelope.

Sign in / Sign up

Export Citation Format

Share Document