Abnormal phenomenon of source-drain current of AlGaN/GaN heterostructure device under UV/visible light irradiation

2021 ◽  
Author(s):  
Yue-Bo Liu ◽  
Jun-Yu Shen ◽  
Jie-Ying Xing ◽  
Wan-Qing Yao ◽  
Hong-Hui Liu ◽  
...  
Keyword(s):  
Visible Light ◽  
Visible Light Irradiation ◽  
Drain Current ◽  
Light Irradiation ◽  
Abnormal Phenomenon ◽  
Uv Visible ◽  
Gan Heterostructure

Photocatalytic Activity of CuO/ZnO Heterostructure Nanocrystals under UV-Visible Light Irradiation

2014 ◽  
Vol 787 ◽  
pp. 35-40 ◽  
Author(s):  
Xiao Yan Zhou ◽  
Peng Wei Zhou ◽  
Hao Guo ◽  
Bo Yang ◽  
Ru Fei Ren
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Cuo Nanoparticles ◽  
Light Irradiation ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Uv Visible

The p-n junction photocatalysts, p-CuO (at. 0-25%)/n-ZnO nanocomposite were prepared through hydrothermal method without using any organic solvent or surfactant. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-Ray spectroscopy, and UV-vis spectroscopy. The results demonstrated that the CuO/ZnO nanocomposite presented a two-dimensional morphology composed of sheet-like ZnO nanostructures adorned with CuO nanoparticles. The photocatalytic activity of CuO/ZnO with different Cu/Zn molar rations and pure ZnO synthesized by the identical synthetic route were evaluated by degrading methylene blue (MB) dye under UV-visible light irradiation. The CuO/ZnO with Cu/Zn molar ratio of 4% exhibits the highest photocatalytic activity compared that of the other photocatalysts under the identical conditions. It is mainly attributed to the increased charge separation rate in the nanocomposite and the extended photo-responding range.

scholarly journals Preparation and Characterizations of In0.1SnxZn0.85-2xS Powder Photocatalysts for Hydrogen Production under Visible Light Irradiation

2011 ◽  
Vol 364 ◽  
pp. 238-242 ◽  
Author(s):  
Kimi Melody ◽  
Yuliati Leny ◽  
Mustaffa Shamsuddin
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Solid Solutions ◽  
Visible Light Irradiation ◽  
Diffuse Reflectance ◽  
Average Rate ◽  
Light Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible

A series of In0.1SnxZn0.85-2xS solid solutions was synthesized by hydrothermal method and employed as photocatalyst for photocatalytic hydrogen evolution under visible light irradiation. The structures, optical properties and morphologies of the solid solutions were studied by X-ray diffraction, diffuse reflectance UV–visible spectroscopy and field emission scanning electron microscopy. From the characterizations, it was confirmed that In0.1SnxZn0.85-2xS solid solution can be obtained and they have nanosized particles. The highest photocatalytic activity was observed on In0.1Sn0.03Zn0.79S photocatalyst, with average rate of hydrogen production 3.05 mmol/h, which was 1.2 times higher than the In0.1Zn0.85S photocatalyst.

Synthesis and photophysical properties of barium indium oxides

2002 ◽  
Vol 17 (9) ◽  
pp. 2201-2204 ◽  
Author(s):  
J. Yin ◽  
Z. Zou ◽  
J. Ye
Keyword(s):  
Optical Absorption ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Diffuse Reflectance Spectroscopy ◽  
Photophysical Properties ◽  
Light Irradiation ◽  
X Ray Diffraction ◽  
Absorption Properties ◽  
Indium Oxides ◽  
Uv Visible

Barium indium oxides (BaIn2O4, Ba4In6O13, Ba2In2O5, Ba3In2O6, and Ba5In2O8) were synthesized by the citric process and characterized by powder x-ray diffraction. The optical absorption properties of these compounds were investigated by UV–visible diffuse reflectance spectroscopy. It was found that with the increase of the mole ratio of In2O3 in the formula the optical absorption edges of these oxides shift to the longer wavelength side monotonically. The photocatalytic H2 and O2 evolutions under visible light irradiation (λ > 420 nm) from aqueous CH3OH/H2O and AgNO3/H2O solutions were performed. Among these oxides, BaIn2O4 was the most stable compound, and other compounds were not stable chemically in the case of water and visible light irradiation.

Controllable Synthesis and Photocatalytic Activity of Ba0.6Mg0.4TiO3 Particles with Different Morphologies

2014 ◽  
Vol 955-959 ◽  
pp. 2267-2275 ◽  
Author(s):  
Rong Liu ◽  
Shi Duo Zhao ◽  
Xue Lin
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Hydrothermal Process ◽  
Light Irradiation ◽  
Photocatalytic Properties ◽  
X Ray Diffraction ◽  
Photocatalytic Activities ◽  
Uv Visible ◽  
Xrd Patterns

Ba0.6Mg0.4TiO3 (BMT) particles with different morphologies were synthesized through hydrothermal method and their optical and photocatalytic properties were investigated. Their crystal structure and microstructures were characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). XRD patterns demonstrate that the as-prepared samples are tetragonal structure. FESEM shows that BMT crystals can be fabricated in different morphologies by simply manipulating the reaction parameters of hydrothermal process. The UV-visible diffuse reflectance spectra (UV-vis DRS) reveal that the band gaps of BMT photocatalysts are about 2.37 - 2.51 eV. The as-prepared BMT photocatalysts exhibite higher photocatalytic activities in the degradation of methyl orange (MO) under visible light irradiation (λ > 420 nm) compared with traditional N-doped TiO2 (N-TiO2) and pure BaTiO3 (BTO). The high photocatalytic performance of BMT photocatalysts could be attributed to the recombination restraint of the e-/h+ pairs resulting from doping of Mg2+ ions. The influence of morphologies upon the photocatalytic properties of BMT was studied. Furthermore, BMT nanowires reveal the highest photocatalytic activity. Up to 94.0% MO is decolorized after visible light irradiation for 360 min.

Sign in / Sign up

Export Citation Format

Share Document