Ka-band full-360° analog phase shifter with low insertion loss

2014 ◽  
Vol 35 (10) ◽  
pp. 105005 ◽  
Author(s):  
Mengyi Cao ◽  
Yang Lu ◽  
Jiaxing Wei ◽  
Jiaxin Zheng ◽  
Xiaohua Ma ◽  
...  
Author(s):  
Aparna B. Barbadekar ◽  
Pradeep M. Patil

Abstract The paper proposes a system consisting of novel programmable system on chip (PSoC)-controlled phase shifters which in turn guides the beam of an antenna array attached to it. Four antennae forming an array receive individual inputs from the programmable phase shifters (IC 2484). The input to the PSoC-based phase shifter is provided from an optimized 1:4 Wilkinson power divider. The antenna consists of an inverted L-shaped dipole on the front and two mirrored inverted L-shaped dipoles mounted on a rectangular conductive structure on the back which resonates in the ISM/Wi-Fi band (2.40–2.48 GHz). The power divider is designed to provide the feed to the phase shifter using a beamforming network while ensuring good isolation among the ports. The power divider has measured S11, S21, S31, S41, and S51 to be −14, −6.25, −6.31, −6.28, and −6.31 dB, respectively at a frequency of 2.45 GHz. The ingenious controller is designed in-house using a PSoC microcontroller to regulate the control voltage of individual phase shifter IC and generate progressive phase shifts. To validate the calibration of the in-house designed control circuit, the phased array is simulated using $s_p^2$ touchstone file of IC 2484. This designed control circuit exhibits low insertion loss close to −8.5 dB, voltage standing wave ratio of 1.58:1, and reflection coefficient (S11) is −14.36 dB at 2.45 GHz. Low insertion loss variations confirm that the phased-array antenna gives equal amplitude and phase. The beamforming radiation patterns for different scan angles (30, 60, and 90°) for experimental and simulated phased-array antenna are matched accurately showing the accuracy of the control circuit designed. The average experimental and simulated gain is 13.03 and 13.48 dBi respectively. The in-house designed controller overcomes the primary limitations associated with the present electromechanical phased array such as cost weight, size, power consumption, and complexity in design which limits the use of a phased array to military applications only. The current study with novel design and enhanced performance makes the system worthy of the practical use of phased-array antennas for common society at large.


2011 ◽  
Vol 403-408 ◽  
pp. 4179-4183
Author(s):  
Anesh K. Sharma ◽  
Ashu K. Gautam ◽  
D.V.K. Sastry ◽  
S.G. Singh

This paper presents the design & modeling of distributed MEMS phase shifter for Ka band RF systems. The phase shift can be achieved by periodically placing the MEMS bridge variable capacitors as per Bragg frequency criteria on coplanar waveguide (CPW) using GaAs substrate. The EM & electromechanical simulation are carried out with various structural parameters to optimize the designs. The novelties like low insertion loss, low actuation voltage with distributed actuation pads & separate DC and RF are used to make the design unique. The EM simulations are carried out with HFSS and an insertion loss of -3.49 dB at 36GHz for a total Phase shift of 360 deg. was achieved with return loss of - 20.6 dB over a frequency band 34-38 GHz. The electromechanical simulations are carried to achieve the low actuation voltage of 10.3V. The significance of this study is the realization of the digital phase shifter through DMTL approach.


2018 ◽  
Vol 61 (4) ◽  
pp. 863-866
Author(s):  
Jeng‐Han Tsai ◽  
Yu‐Hui Lin ◽  
Chuan‐Chi Hung

Sign in / Sign up

Export Citation Format

Share Document