Electrotactile EMG feedback improves the control of prosthesis grasping force

2016 ◽  
Vol 13 (5) ◽  
pp. 056010 ◽  
Author(s):  
Meike A Schweisfurth ◽  
Marko Markovic ◽  
Strahinja Dosen ◽  
Florian Teich ◽  
Bernhard Graimann ◽  
...  
Keyword(s):  
1999 ◽  
Vol 13 (4) ◽  
pp. 234-244
Author(s):  
Uwe Niederberger ◽  
Wolf-Dieter Gerber

Abstract In two experiments with four and two groups of healthy subjects, a novel motor task, the voluntary abduction of the right big toe, was trained. This task cannot usually be performed without training and is therefore ideal for the study of elementary motor learning. A systematic variation of proprioceptive, tactile, visual, and EMG feedback was used. In addition to peripheral measurements such as the voluntary range of motion and EMG output during training, a three-channel EEG was recorded over Cz, C3, and C4. The movement-related brain potential during distinct periods of the training was analyzed as a central nervous parameter of the ongoing learning process. In experiment I, we randomized four groups of 12 subjects each (group P: proprioceptive feedback; group PT: proprioceptive and tactile feedback; group PTV: proprioceptive, tactile, and visual feedback; group PTEMG: proprioceptive, tactile, and EMG feedback). Best training results were reported from the PTEMG and PTV groups. The movement-preceding cortical activity, in the form of the amplitude of the readiness potential at the time of EMG onset, was greatest in these two groups. Results of experiment II revealed a similar effect, with a greater training success and a higher electrocortical activation under additional EMG feedback compared to proprioceptive feedback alone. Sensory EMG feedback as evaluated by peripheral and central nervous measurements appears to be useful in motor training and neuromuscular re-education.


Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 966 ◽  
Author(s):  
Marco Costanzo ◽  
Giuseppe De Maria ◽  
Ciro Natale ◽  
Salvatore Pirozzi

This paper presents the design and calibration of a new force/tactile sensor for robotic applications. The sensor is suitably designed to provide the robotic grasping device with a sensory system mimicking the human sense of touch, namely, a device sensitive to contact forces, object slip and object geometry. This type of perception information is of paramount importance not only in dexterous manipulation but even in simple grasping tasks, especially when objects are fragile, such that only a minimum amount of grasping force can be applied to hold the object without damaging it. Moreover, sensing only forces and not moments can be very limiting to securely grasp an object when it is grasped far from its center of gravity. Therefore, the perception of torsional moments is a key requirement of the designed sensor. Furthermore, the sensor is also the mechanical interface between the gripper and the manipulated object, therefore its design should consider also the requirements for a correct holding of the object. The most relevant of such requirements is the necessity to hold a torsional moment, therefore a soft distributed contact is necessary. The presence of a soft contact poses a number of challenges in the calibration of the sensor, and that is another contribution of this work. Experimental validation is provided in real grasping tasks with two sensors mounted on an industrial gripper.


2017 ◽  
Vol 9 (6) ◽  
Author(s):  
Toshihiro Nishimura ◽  
Yoshinori Fujihira ◽  
Tetsuyou Watanabe

This paper presents a novel fingertip system with a two-layer structure for robotic hands. The outer part of the structure consists of a rubber bag filled with fluid, called the “fluid fingertip,” while the inner part consists of a rigid link mechanism called a “microgripper.” The fingertip thus is a rigid/fluid hybrid system. The fluid fingertip is effective for grasping delicate objects, that is, it can decrease the impulsive force upon contact, and absorb uncertainties in object shapes and contact force. However, it can only apply a small grasping force such that holding a heavy object with a robotic hand with fluid fingertips is difficult. Additionally, contact uncertainties including inaccuracies in the contact position control cannot be avoided. In contrast, rigid fingertips can apply considerable grasping forces and thus grasp heavy objects effectively, although this makes delicate grasping difficult. To maintain the benefits of the fluid fingertip while overcoming its disadvantages, the present study examines passively operable microgripper-embedded fluid fingertips. Our goal is to use the gripper to enhance the positioning accuracy and increase the grasping force by adding geometrical constraints to the existing mechanical constraints. Grasping tests showed that the gripper with the developed fingertips can grasp a wide variety of objects, both fragile and heavy.


Sign in / Sign up

Export Citation Format

Share Document