Abstract
Cryogenic cutting is becoming an attractive machining method for difficult-to-cut materials. However, it’s very difficult to analyze directly their cutting mechanism at low temperature. In order to better understand the various physical phenomena in the cryogenic cutting of titanium alloy, the Charpy impact test of Ti-6Al-4V titanium alloy at low temperatures (as low as -196 °C) was undertaken in this work. The Charpy absorbed energy of Ti-6Al-4V titanium alloy at low temperatures was investigated firstly. Then, by observing the microscopic and macroscopic morphology of the fracture, the impact properties and fracture modes of Ti-6Al-4V titanium alloy at low temperatures were analyzed. It was found that the impact toughness of Ti-6Al-4V titanium alloy reduces when the temperature decreases from 20 °C to -196 °C, and the fracture appears a tendency to become brittle. Meanwhile, three kinds of areas, i.e. shear lip area, fiber area, and radiation area, were found on the fracture morphology at each temperature. Those areas correspond to the shear fracture zone, crack initiation zone, and crack extension zone, respectively. With the decrease in temperature, the proportion of fiber area decreases, and the radiation area appears and increases gradually. However, fiber areas were still observed on the macroscopic morphology of the fracture under − 196 °C, which suggests that Ti-6Al-4V titanium alloy still has the ability to deform plastically at such low temperatures. The research result in this work provide a fundamental support for analyzing the cutting mechanism of Ti-6Al-4V titanium alloy at low temperatures.
Effect of Isothermal Annealing on the Microstructure and Impact Properties of TC10 Titanium Alloy
