Features of modeling of stress and strain waves in an anisotropic medium on the example of a wooden element
Abstract This article describes the hypotheses of the occurrence, propagation, and modification of stress and strain waves caused by external loads in isotropic and anisotropic infinite and finite elastic media. A model of an infinite elastic medium experiencing a point external impulse is presented. The model demonstrates the propagation of a longitudinal plane wave. Compaction and rarefaction of the medium are observed in the plane with wave propagation. A graph of changes in the amplitude of a longitudinal plane wave is presented in the same coordinate system. The problem is posed of expanding the numerical model of a finite elastic medium in the form of an anisotropic wooden rod experiencing a plane external impulse. The model should demonstrate the propagation of longitudinal and transverse waves and describe the volumetric deformation of an anisotropic material. Compaction and rarefaction of the medium are shown in the plane, coinciding with the direction of wave propagation. A graph of the change in the shear wave amplitude is presented in the same coordinate system. The combination of these two graphsreveals the difference in wave propagation velocities and the combination of amplitudes. The model will make it possible to identify the presence of Rayleigh waves and to describe the reflection of waves from the boundary of the medium.
