scholarly journals Laboratory evaluation on functional characteristics of open-graded epoxy asphalt mixture

2018 ◽  
Vol 199 ◽  
pp. 032030
Author(s):  
Ke Zhong ◽  
Mingzhi Sun ◽  
Xiong Tang
Keyword(s):  
Asphalt Mixture ◽  
Laboratory Evaluation ◽  
Functional Characteristics ◽  
Epoxy Asphalt

scholarly journals Evaluation of the Effects of Filler Fineness on the Properties of an Epoxy Asphalt Mixture

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2003
Author(s):  
Wei Xu ◽  
Jintao Wei ◽  
Zhengxiong Chen ◽  
Feng Wang ◽  
Jian Zhao
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Asphalt Mixture ◽  
Average Particle ◽  
Fine Dust ◽  
Bonding Structure ◽  
Epoxy Asphalt ◽  
Mineral Powder ◽  
Marshall Stability ◽  
Mixture Sample

The type and fineness of a filler significantly affect the performance of an asphalt mixture. There is a lack of specific research on the effects of filler fineness and dust from aggregates on the properties of epoxy asphalt (EA) mixtures. The effects of aggregate dust and mineral powder on the properties of an EA mixture were evaluated. These filler were tested to determine their fineness, specific surface area and mineral composition. The effects of these fillers on the EA mastic sample and mixture were evaluated. The morphology of the EA mastic samples was analyzed using scanning electron microscopy (SEM). The effects of the fillers on the Marshall stability, tensile strength and fatigue performance of the EA mixture were evaluated. The dust from the aggregates exhibited an even particle size distribution, and its average particle size was approximately 20% of that of the mineral powder. The SEM microanalysis showed that the EA mastic sample containing relatively fine dust formed a tight and dense interfacial bonding structure with the aggregate. The EA mixture sample containing filler composed of dust from aggregate had a significantly higher strength and longer fatigue life than that of the EA sample containing filler composed of mineral powder.

scholarly journals Rejuvenation Mechanism of Asphalt Mixtures Modified with Crumb Rubber

CivilEng ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 370-384
Author(s):  
Hossein Noorvand ◽  
Kamil Kaloush ◽  
Jose Medina ◽  
Shane Underwood
Keyword(s):  
Tensile Strength ◽  
Dynamic Loading ◽  
Creep Compliance ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Strength Testing ◽  
Noise Mitigation ◽  
Indirect Tensile

Asphalt aging is one of the main factors causing asphalt pavements deterioration. Previous studies reported on some aging benefits of asphalt rubber mixtures through laboratory evaluation. A field observation of various pavement sections of crumb rubber modified asphalt friction courses (ARFC) in the Phoenix, Arizona area indicated an interesting pattern of transverse/reflective cracking. These ARFC courses were placed several years ago on existing jointed plain concrete pavements for highway noise mitigation. Over the years, the shoulders had very noticeable and extensive cracking over the joints; however, the driving lanes of the pavement showed less cracking formation in severity and extent. The issue with this phenomenon is that widely adopted theories that stem from continuum mechanics of materials and layered mechanics of pavement systems cannot directly explain this phenomenon. One hypothesis could be that traffic loads continually manipulate the pavement over time, which causes some maltenes (oils and resins) compounds absorbed in the crumb rubber particles to migrate out leading to rejuvenation of the mastic in the asphalt mixture. To investigate the validity of such a hypothesis, an experimental laboratory testing was undertaken to condition samples with and without dynamic loads at high temperatures. This was followed by creep compliance and indirect tensile strength testing. The results showed the higher creep for samples aged with dynamic loading compared to those aged without loading. Higher creep compliance was attributed to higher flexibility of samples due to the rejuvenation of the maltenes. This was also supported by the higher fracture energy results obtained for samples conditioned with dynamic loading from indirect tensile strength testing.

scholarly journals Laboratory Evaluation of the Use of Florida Washed Shell in Open-Graded Asphalt Mixtures

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7060
Author(s):  
Mohammad Alharthai ◽  
Qing Lu ◽  
Ahmed Elnihum ◽  
Asad Elmagarhe
Keyword(s):  
Tensile Strength ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Void Content ◽  
Coarse Aggregates ◽  
Significant Difference ◽  
Indirect Tensile ◽  
Marshall Stability

This study investigates the substitution of conventional aggregate with a Florida washed shell in open-graded asphalt mixtures and evaluates the optimal substitution percentage in aggregate gradations of various nominal maximum aggregate sizes (NMASs) (i.e., 4.75, 9.5, and 12.5 mm). Laboratory experiments were performed on open-graded asphalt mixture specimens with the coarse aggregate of sizes between 2.36 and 12.5 mm being replaced by the Florida washed shell at various percentages (0, 15, 30, 45, and 100%). Specimen properties relevant to the performance of open-graded asphalt mixtures in the field were tested, evaluated, and compared. Specifically, a Marshall stability test, Cantabro test, indirect tensile strength test, air void content test, and permeability test were conducted to evaluate the strength, resistance to raveling, cracking resistance, void content, and permeability of open-graded asphalt mixtures. The results show that there is no significant difference in the Marshall stability and indirect tensile strength when the coarse aggregates are replaced with Florida washed shell. This study also found that the optimum percentages of Florida washed shell in open-graded asphalt mixture were 15, 30, and 45% for 12.5, 9.5, and 4.75 mm NMAS gradations, respectively.

Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture

2015 ◽  
Vol 66 ◽  
pp. 51-59 ◽  
Author(s):  
Qinglin Guo ◽  
Lili Li ◽  
Yongchun Cheng ◽  
Yubo Jiao ◽  
Chun Xu
Keyword(s):  
Glass Fiber ◽  
Asphalt Mixture ◽  
Laboratory Evaluation ◽  
Modified Asphalt

LABORATORY EVALUATION ON THE EFFECT OF CLOGGING ON PERMEABILITY OF POROUS ASPHALT MIXTURES

2015 ◽  
Vol 76 (14) ◽  
Author(s):  
Norhidayah Abdul Hassan ◽  
Nor Asniza Mohamed Abdullah ◽  
Nurul Athma Mohd Shukry ◽  
Mohd Zul Hanif Mahmud ◽  
Nur Zurairahetty Mohd Yunus ◽  
...  
Keyword(s):  
Asphalt Mixture ◽  
Residential Area ◽  
Liquid Limit ◽  
Asphalt Mixtures ◽  
Public Works ◽  
Storm Water ◽  
Laboratory Evaluation ◽  
Aggregate Gradation ◽  
Porous Asphalt ◽  
The One

Porous asphalt mixture is one of the alternative solutions to increase pervious surface area due to urbanization. The uniqueness of porous asphalt surface textures and internal structures allows the mixture to become a temporary storm-water retention and capable to channel excessive storm water. However, one of the major problems that affect the performance of porous asphalt mixtures is the clogging. Therefore, this study aims to determine the effect of clogging towards the permeability of porous asphalt. A total of 30 gyratory compacted samples were fabricated according to aggregate gradation recommended by Malaysia Public Works Department. The clogging materials were collected from two different location, residential area and major highway. The composition and characteristics of the clogging materials were investigated using Plastic Limit, Liquid Limit and Scanning Electron Microscope (SEM). The permeability test was conducted to investigate the permeability rate of the compacted samples based on different clogging material types, clogging concentrations and clogging cycles. In addition, the compacted samples were scanned using X-ray Computed Tomography to obtain the air voids distribution throughout the samples for comparison. It was found that higher concentration of clogging materials and clogging cycles reduced the rate of permeability. Clogging material collected from residential area has higher tendency to clog the void spaces compared to the one obtained from highway.

Performance Evaluation of a Novel High Durability Epoxy Asphalt Concrete for Bridge Deck Pavements

2014 ◽  
Vol 488-489 ◽  
pp. 550-553
Author(s):  
Xing Song Cao ◽  
Dong Wei Cao ◽  
Shi Xiong Liu ◽  
Xio Qiang Yang ◽  
Lin Lan
Keyword(s):  
Asphalt Concrete ◽  
Bridge Deck ◽  
Asphalt Binder ◽  
Laboratory Evaluation ◽  
Suitable Material ◽  
Long Span ◽  
Epoxy Asphalt ◽  
High Durability ◽  
Specimen Test ◽  
Epoxy Asphalt Concrete

A novel high durability epoxy asphalt concrete for bridge deck pavements is introduced in this paper, including the manufacturing process of epoxy asphalt binder and laboratory evaluation for this material. Various laboratory tests were conducted to evaluate the pavement performance of the materials, such as fatigue test, wheel tracking test, moisture susceptibility test and thermal stress restrained specimen test. Test results show that epoxy asphalt concrete has 20137 cycles/mm dynamic stability at 70°C, and-28.4 °C fracture temperature. The fatigue equations of epoxy asphalt concrete at different temperatures were obtained. Findings from the research indicate that the epoxy asphalt concrete is a suitable material for the pavement of long-span steel bridges in China due to its profound performance.

Sign in / Sign up

Export Citation Format

Share Document