scholarly journals Unconfined Compressive Strength of Chemical Stabilised Recycled Asphalt Pavement (RAP) and Crusher Run Mixture for Road Base Course Application

Author(s):  
Tan Poi Cheong ◽  
Chan Chee Ming
2015 ◽  
Vol 727-728 ◽  
pp. 25-29
Author(s):  
Bo Peng ◽  
Wen Ying Li ◽  
Guang Kai Yin ◽  
Zhi Hao Cheng

This paper studies on shrinkage performance of recycled asphalt pavement (RAP) material blended with inorganic binder such as cement, lime-fly ash (lime and fly ash) and three ashes (cement, lime and fly ash), with certain intensity used as base course. The erosion, dry shrinkage and temperature shrinkage tests were conducted on the recycled asphalt pavement (RAP) material blended with the three kinds of inorganic binder, to evaluate and compare different types of cold recycled inorganic material shrinkage resistance capability and anti-erosion properties. After analyzing the fatigue test result of three-additives-stabilized recycled mixture, it showed that the recycled pavement mixture owned preferable anti-erosion properties, anti-temperature shrinkage resistance and anti-dry shrinkage performance.


2017 ◽  
Vol 144 ◽  
pp. 624-634 ◽  
Author(s):  
Menglim Hoy ◽  
Runglawan Rachan ◽  
Suksun Horpibulsuk ◽  
Arul Arulrajah ◽  
Mehdi Mirzababaei

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Ayşegül Güneş Seferoğlu ◽  
Mehmet Tevfik Seferoğlu ◽  
Muhammet Vefa Akpınar

The purpose of this research was to investigate the effects of recycled asphalt pavement (RAP) and cement content on the permeability and bearing capacity characteristics of aggregate base courses. Mixtures containing untreated RAP ranging between 0 and 100 percent and 1, 2, and 3% cement-treated RAP were subjected to laboratory tests (bitumen content, sieve analysis, modified proctor, soaked California bearing ratio (CBR), and constant-level permeability tests). The results showed that, as the RAP percentage in the mixture increased, CBR values decreased considerably. Moreover, there is a linear increase in the CBR values with cement treatment. Optimum moisture contents (OMC) and maximum dry densities (MDD) showed a decreasing trend. Increasing the cement percentages in 100% RAP blend increases the OMC and MDD values. The permeability of RAP showed a decrease as the percentage of RAP and cement increased in blends. The study showed that the CBR value of the 20% RAP blend is also obtained in the 100% RAP/3% cement-treated blend. Thus, it has been understood that cement is a suitable material in order to increase the use of RAP. In addition, the increase in the percentage of RAP and cement made the base course more impermeable.


2021 ◽  
Vol 16 (2) ◽  
pp. 1-15
Author(s):  
Peteris Skels ◽  
Viktors Haritonovs ◽  
Edvards Pavlovskis

Wood fly ash stabilised road base layers with high recycled asphalt pavements content was studied both at the laboratory and in-situ. The original recipe was chosen based on an actual stabilised pavement base layer design with cement CEM II/B-T 42.5R but optimised using wood fly ash. The existing road base layer from gravel was mixed with dolomite aggregate and recycled asphalt pavement, adding cement and wood fly ash at different proportions. The mixture was compacted at optimal water content according to the Standard Proctor test and further conditioned. Resistance to freezing and thawing of hydraulically bound mixtures was checked after 28 days of conditioning. Even 50 cycles of freezing and thawing were used. Test results indicated wood fly ash as an effective alternative to the typically used cement for road base stabilisation, including recycled asphalt pavement material. Three hydraulically bound mixtures were chosen for test sections in the pilot project. The project includes five different sections with three different hydraulic binder recipes. The performance of each section was evaluated.


2020 ◽  
Vol 856 ◽  
pp. 384-390
Author(s):  
Jirayut Suebsuk ◽  
Panupong Panpipat

This article presents the compressive strength and workability of cement mortar (CM) containing recycled asphalt pavement (RAP) as fine aggregate replacement. The effect of the RAP replacement, water to cement ratio, curing time, and aggregate water absorption on compressive strength and flow workability are reported. The results show that the mixing water and mixing time play a significant role in the compressive strength and unit weight of CM containing RAP. The RAP has a higher water absorption and slower rate of water absorption than those of sand. The flow workability of CM increases with RAP replacement due to the unabsorbed water at the initial mixing stage. The main negative factors that affected the compressive strength of CM containing RAP as a fine aggregate replacement are revealed. The unabsorbed water at the initial state of mixing before hardening causes increased flow workability and decreased compressive strength. The findings from this research will promote the mix design approach of CM containing RAP as a fine aggregate replacement, for moving toward increased applications of recycled materials in a sustainable manner in civil engineering construction.


Author(s):  
Louay N. Mohammad ◽  
Murad Y. Abu-Farsakh ◽  
Zhong Wu ◽  
Chris Abadie

Utilization of existing recyclable materials has always been key to more efficient and economical highway construction. Use of the foamed-asphalt (FA) technique to stabilize recycled asphalt pavement (RAP) is one strategy for an efficient use of salvaged construction materials. The main objective of this study is to investigate the potential use of FA-treated RAP as a base course material in lieu of a crushed-limestone base beneath a concrete pavement layer. Test sections were constructed at US-190 near Baton Rouge, Louisiana, and used for field evaluation of the FA RAP base. The laboratory mixture design of the FA RAP, the construction of the experimental base section, and the field evaluation of the stiffness of the FA RAP base layers using different in situ testing devices are presented. Preliminary results of both laboratory and field tests showed that the FA-treated RAP mixtures are very promising and can be used as an alternative to the traditional limestone base beneath a concrete pavement layer.


Sign in / Sign up

Export Citation Format

Share Document