Estimating Nutrient Uptake Requirements for Melon Based on the QUEFTS Model

Imbalanced and excessive fertilizer application has resulted in low yields and reduced nutrient use efficiency for melon production in China. Estimating nutrient requirements is crucial for effectively developing site-specific fertilizer recommendations for increasing yield and profit while reducing negative environmental impacts. Relationships between the yield and nutrient uptake requirements of above-ground dry matter were assessed using 1127 on-farm observations (2000–2020) from melon production regions of China. The quantitative evaluation of fertility of tropical soils (QUEFTS) model was used to estimate nutrient requirements. It predicted a linear increase in yield at balanced nutrient uptake levels until the yield reached approximately 60–80% of the potential yield. In order to produce 1000 kg of fruit, 2.9, 0.4 and 3.2 kg/ha of N, P and K (7.2:1.0:7.8), respectively, were required for above-ground parts, while the corresponding nutrient internal efficiencies were 345.3, 2612.6 and 310.0 kg per kg N, P and K, respectively, whereas 1.4, 0.2 and 1.9 kg of N, P and K were required to replace nutrients removed after harvest. The corresponding fruit absorption rates were 47.0%, 59.5% and 58.2%, respectively. Field validation experiments confirmed the consistency between observed and simulated uptake rates, indicating that this model could estimate nutrient requirements. These findings will help develop fertilizer recommendations for improving melon yield and nutrient use efficiency.

Research on the Water Ridge and Slamming Characteristics of a Semisubmersible Platform under Towing Conditions

During the towing of semisubmersible platforms, waves impact and superpose in front of the platform to form a ridge shaped “water ridge”, which protrudes near the platform and produces a large slamming pressure. The water ridges occur frequently in the towing conditions of semisubmersible platforms. The wave–slamming on the braces and columns of platform is aggravated due to the water ridges, particularly in rough sea conditions. The effect of water ridges is usually ignored in slamming pressure analysis, which is used to check the structural strengths of the braces and columns. In this paper, the characteristics of the water ridge at the braces of a semisubmersible platform are studied by experimental tests and numerical simulations. In addition, the sensitivity of the water ridge to the wave height and period is studied. The numerical simulations are conducted by a Computational Fluid Dynamics (CFD) method, and their accuracy is validated based on experimental tests. The characteristics of the water ridge and slamming pressure on the braces and columns are studied in different wave conditions based on the validated numerical model. It is found that the wave extrusion is the main reason of water ridge. The wave–slamming pressure caused by the water ridge has an approximately linear increase with the wave height and is sensitive to the wave period. With the increase of the wave period, the wave–slamming pressure on the brace and column of the platform increases first and then decreases. The maximum wave–slamming pressure is found when the wave period is 10 s and the slamming pressure reduces rapidly with an increase of wave period.

Improvement in the microhardness and corrosion behaviour of Ti-14Mn biomedical alloy by cold working

β-titanium alloys are essential in many applications, particularly biomedical applications. Ti-14Mn β-type alloy was produced using an electric arc furnace from raw alloying elements in an inert atmosphere. The alloy was homogenized at 1000 °C for 8 hr to ensure the complete composition distribution, followed by solution treatment at 900 °C, then quenched in ice water. The alloy was subjected to cold deformation via cold rolling with different ratios: 10, 30, and 90%. The phases change, microstructure, mechanical properties, and corrosion resistance of Ti-14Mn alloys were evaluated before and after cold rolling. The results showed that the β-phase is the only existed phase even after a high degree of deformation. The microstructure shows a combination of twinning and slipping deformation mechanisms in the deformed alloy. Microhardness values indicated a linear increase equal to 30% by increasing the ratio of cold deformation due to the strain hardening effect. The corrosion resistance of Ti-14Mn alloy was doubled after 90% cold rolling.

Quasi-biennial and quasi-triennial oscillations in the growth rates of atmospheric chlorofluorocarbons 11 and 12

The 12-monthly running means of CFC-11 and CFC-12 were examined for 1977-1992. As observed by earlier workers, during 1977-1988, there was a rapid, almost linear increase of these compounds, ~70% in the northern and ~77% in the southern hemisphere. From 1988 up to 1992, growth rates were slower, more so for CFC-11 in the northern hemisphere. Superposed on this pattern were QBO, QTO (Quasi-Biennial and Quasi-Triennial Oscillations). A spectral analysis of the various series indicated the following. The 50 hPa low latitude zonal wind had one prominent QBO peak at 2.58 years and much smaller peaks at 2.00 (QBO) and 5.1 years. The Southern oscillation index represented by (T-D), Tahiti minus Darwin atmospheric pressure, had a prominent peak at 4.1 years and a smaller peak at 2.31 years. CFC-11 had only one significant peak at 3.7 years in the southern hemisphere, roughly similar to the 4.1 year (T-D) peak. CFC-12 had prominent QBO (2.16-2.33 years) in both the hemispheres and a QTO (3.6 years) in the southern hemisphere. For individual locations, CFC-11 showed barely significant QBO in the range (1.95-3.07 years), while CFC 12 showed strong QBO in the range (1.86-2.38 years). The difference in the spectral characteristics of CFC-11 and CFC 12 time series is attributed to differences in their lifetimes (44 and 180 years), source emission rates and transport processes.

Dietary l-glutamic acid N,N-diacetic acid improves short-term maintenance of zinc homoeostasis in a model of subclinical zinc deficiency in weaned piglets

This study compared the Zn response in selected tissues of weaned piglets fed L-glutamic acid, N,N-diacetic acid (GLDA), while challenged with short-term subclinical Zn deficiency (SZD). During a total experimental period of eight days, 96 piglets were fed restrictively (450 g/d) a high phytate (9 g/kg) diet containing added Zn at 0, 5, 10, 15, 20, 25, 45 and 75 mg/kg with and without 200 mg/kg of GLDA. No animals showed signs of clinical Zn deficiency and no phenotypical differences were observed. Broken line analysis of Zn status parameters such as liver Zn and apparently absorbed Zn indicated that the gross Zn requirement threshold was around 55 mg/kg diet. Supplementation of Zn above this threshold led to a saturation of the response in apparently absorbed Zn and linear increase in liver Zn. Bone and serum Zn responded to the dose in a linear fashion, likely due to the time-frame of Zn homoeostatic adaptation. Inclusion of GLDA into the diets yielded a higher intercept for bone Zn (P < 0·05). Liver Zn accumulation and MT1A gene expression was higher for piglets receiving GLDA (P < 0·05), indicating higher Zn influx. This study indicates that a strong chelator such as GLDA mitigates negative effects of phytate in plant-based diets, by sustaining Zn solubility, thereby improving nutritional Zn availability.

Night shift work and lymphoma: results from an Italian multicentre case–control study

BackgroundNight shift work can disrupt circadian rhythm and cause chronic sleep deprivation, which might increase the risk of lymphoma through immunosuppression and oxidative stress.Material and methodsWe investigated the association between night shift work and risk of lymphoma subtypes in 867 incident cases and 774 controls, who participated in a multicentre Italian study between 2011 and 2017. Based on questionnaire information, occupational experts assessed the lifetime probability of night shift work, the total number of night shifts and years of night shift work among study participants. OR and 95% CI for lymphoma and its major subtypes associated with night shift work was calculated with logistic regression, adjusting by age, gender, education, study area, marital status and family history of haemolymphatic cancer.ResultsEver working night shifts was associated with an increase in the risk of chronic lymphocytic leukaemia (CLL) (OR 1.9, 95% CI 1.14 to 3.32), which was highest after a 15–34 years latency. However, there was not a linear increase in risk by probability of exposure, years of night shift work, nor lifetime number of night shifts whether under rotating or permanent work schedules. Risk of lymphoma overall, B cell lymphoma (BCL), its major subtypes other than CLL, and other less prevalent BCL subtypes combined did not show an association.ConclusionsWe found conflicting evidence of an association between night shift work and the risk of CLL. We did not observe an association with other lymphoma subtypes.

Economic Analysis of Smallholder Dairy Cattle Enterprises In Senegal

Smallholder dairy production in Senegal is important to both livelihoods and food and nutrition security. Here we examine the economic performance of smallholder dairy cattle enterprises in Senegal, using data from longitudinal monitoring of 113 households. The mean (and standard deviation) of the net returns (NR) per cow per annum (pcpa) was 21.7 (202.9) USD, whilst the NR per household herd per annum (phpa) was 106.1 (1740.3) USD. Only about half (52.2 %) of the dairy cattle enterprise had a positive NR. The most significant income components were milk sale followed by animal sale, whilst the most significant cost components were animal feed followed by animal purchase. When households were grouped by ranking on NRpcpa an interesting trend was observed: whilst the mean NRpcpa showed a fairly linear increase from the lowest to highest NR groups, income and cost did not. Income and costs were both higher for the lowest and highest NR groups, in comparison to the intermediate NR groups. The mean NRs of households grouped by the main breed-type they kept were not significantly different from each other, due to large variances within the breed groups. However, the mean total income and costs were significantly higher for households mainly keeping improved dairy breeds (Bos taurus or Zebu x Bos taurus crosses) in comparison to those keeping indigenous Zebu or Zebu by Guzerat crosses. This study highlights the highly variable (and often low) profitability of smallholder dairy cattle enterprise in Senegal. Further actions to address this are strongly recommended.

Multiscale modelling of Potts shunt as a potential palliative treatment for suprasystemic idiopathic pulmonary artery hypertension: a paediatric case study

Potts shunt (PS) was suggested as palliation for patients with suprasystemic pulmonary arterial hypertension (PAH) and right ventricular (RV) failure. PS, however, can result in poorly understood mortality. Here, a patient-specific geometrical multiscale model of PAH physiology and PS is developed for a paediatric PAH patient with stent-based PS. In the model, 7.6mm-diameter PS produces near-equalisation of the aortic and PA pressures and $$Q_p/Q_s$$ Q p / Q s (oxygenated vs deoxygenated blood flow) ratio of 0.72 associated with a 16% decrease of left ventricular (LV) output and 18% increase of RV output. The flow from LV to aortic arch branches increases by 16%, while LV contribution to the lower body flow decreases by 29%. Total flow in the descending aorta (DAo) increases by 18% due to RV contribution through the PS with flow into the distal PA branches decreasing. PS induces 18% increase of RV work due to its larger stroke volume pumped against lower afterload. Nonetheless, larger RV work does not lead to increased RV end-diastolic volume. Three-dimensional flow assessment demonstrates the PS jet impinging with a high velocity and wall shear stress on the opposite DAo wall with the most of the shunt flow being diverted to the DAo. Increasing the PS diameter from 5mm up to 10mm results in a nearly linear increase in post-operative shunt flow and a nearly linear decrease in shunt pressure-drop. In conclusion, this model reasonably represents patient-specific haemodynamics pre- and post-creation of the PS, providing insights into physiology of this complex condition, and presents a predictive tool that could be useful for clinical decision-making regarding suitability for PS in PAH patients with drug-resistant suprasystemic PAH.

Testing the state-dependent model of time perception against experimental evidence

Coordinated movements, speech and other actions are impossible without precise timing. Realistic computational models of interval timing in the mammalian brain are expected to provide key insights into the underlying mechanisms of timing. Existing computational models of time perception have only been partially replicating experimental observations, such as the linear increase of time, the dopaminergic modulation of this increase, and the scalar property, i.e., the linear increase of the standard deviation of temporal estimates. In this work, we incorporate the state-dependent computational model, which encodes time in the dynamic evolution of network states without the need for a specific network structure into a biologically plausible prefrontal cortex (PFC) model based on in vivo and in vitro recordings of rodents. Specifically, we stimulated 1000 neurons in the beginning and in the end of a range of different time intervals, extracted states of neurons and trained the readout layer based on these states using least squares to predict the respective inter stimulus interval. We show that the naturally occurring heterogeneity in cellular and synaptic parameters in the PFC is sufficient to encode time over several hundreds of milliseconds. The readout faithfully represents the duration between two stimuli applied to the superficial layers of the network, thus fulfilling the requirement of a linear encoding of time. A simulated activation of the D2 dopamine receptor leads to an overestimation and an inactivation to an underestimation of time, in line with experimental results. Furthermore, we show that the scalar property holds true for intervals of several hundred milliseconds, and provide a mechanistic explanation for the origin of the scalar property as well as its deviations. We conclude that this model can represent durations up to 750 ms in a biophysically plausible setting, compatible with experimental findings in this regime.

Dietary net energy levels for growing barrows from 30 to 70 kg

ABSTRACT: This study evaluated the effect of dietary net energy (NE) levels on growth performance and carcass characteristics of barrows from 30 to 70 kg of body weight (BW). Sixty barrows with initial body weight (IBW) of 31.94 ± 3.54 kg and final body weight (FBW) of 71.98 ± 5.99 kg were allotted to one of five dietary NE levels (2.40, 2.45, 2.50, 2.55, and 2.60 Mcal kg-1), using a completely randomized block design with six replicates and two barrows per replicate. The experimental period was divided into phase I: 30 to 50 kg and phase II: 50 to 70 kg. The variables analyzed were average daily feed intake (ADFI), net energy intake (NEI), digestible lysine intake (LysI), average daily gain (ADG), feed conversion (FC), FBW, digestible lysine conversion:gain (LysI:G), Cost:Gain (C:G), loin eye area (LEA), muscle depth (MD), first backfat layer (BF1), second backfat layer (BF2), total backfat (BFt), lean meat percentage, and carcass bonus index (BI). In phase I, there was a linear increase (P < 0.05) in FBW, ADG, NEI, and LysI with increasing NE levels in the diet. In phase II, increasing dietary NE levels also increased (P < 0.05) FBW, ADG, NEI, LysI, and FC linearly. Overall, there was a linear increase (P < 0.05) in ADG, NEI, LysI, and FC with increasing NE levels in the diet. The other performance variables were not affected (P > 0.05) by the NE levels. There was an increase (P < 0.05) in BF2 with increasing NE levels, but the other carcass characteristics were not altered (P > 0.05). We recommended 2.60 Mcal of NE kg-1 in the diet for growing barrows from 30 to 70 kg.