scholarly journals Risk control analysis of safety accident in Hydrogen refueling station based on PHAST software

2021 ◽  
Vol 680 (1) ◽  
pp. 012119
Author(s):  
Xiaotong Wang ◽  
Xiaoxue Ma
Keyword(s):  
Risk Control ◽  
Control Analysis ◽  
Safety Accident

Safety Accident Analysis and Risk Control in Subsea Tunneling

2011 ◽  
Vol 346 ◽  
pp. 69-74
Author(s):  
Cheng Ping Zhang ◽  
Li Min Li ◽  
Hao Ran Song ◽  
Ding Li Zhang
Keyword(s):  
Water Inrush ◽  
Risk Control ◽  
Technical System ◽  
Accident Analysis ◽  
Urgent Problem ◽  
Safety Risk ◽  
Safety Risks ◽  
Control Schemes ◽  
Subsea Tunnel ◽  
Safety Accident

There are more safety risks in subsea tunneling due to the particularity and complexity of its surroundings, so how to control the safety risks effectively has become an urgent problem. Based on the analysis of safety accident cases induced by the subsea tunneling, accident types and corresponding harms are pointed out. By analyzing the engineering characteristics and technical difficulties of the subsea tunnel systematically, the characteristics and occurring mechanism of the safety risk are revealed, and the fact that water inrush is the main safety risk in subsea tunneling is pointed out definitely. Furthermore, the contents of the safety risk control as well as relevant technical system are provided mainly based on water inrush risk, which can be referenced to make control schemes against the safety risk in subsea tunneling.

scholarly journals Risk control analysis of a furniture production activities using hazard identification and risk assessment method

2018 ◽  
Vol 154 ◽  
pp. 01102 ◽  
Author(s):  
Sri Indrawati ◽  
Atyanti Dyah Prabaswari ◽  
M. Abdul Fitriyanto
Keyword(s):  
Risk Assessment ◽  
Technological Development ◽  
Risk Control ◽  
Assessment Method ◽  
Hazard Identification ◽  
Worker Safety ◽  
Risk Level ◽  
Control Analysis ◽  
Use Of Technology ◽  
Risk Assessment Method

The furniture industry in Indonesia is growing rapidly that leads to technological development. But the use of technology in the industry creates some risk to worker safety. The number of work accidents in Indonesia at the end of 2016 is relatively high. Therefore, this research is conducted to identify hazards and determine risk control using hazard identification and risk assessment method (HIRA). There are three main stages, i.e. identify and analyze hazards, classify hazards and risk control. The result shows that there are nine potential hazards in furniture production, 22% of it is categorized as high risk level, i.e. hand slashed and fingers cut by machine. Three types of risk control activities are determined to minimize the risk, i.e. administration and engineering control and personal protective equipment.

Quality Control Analysis of Safoof-e-Pathar Phori, A Unani Herbo-mineral Formulation

Planta Medica ◽  
2011 ◽  
Vol 77 (05) ◽  
Author(s):  
W Ahmad ◽  
MS Khan ◽  
SMA Zaidi ◽  
SS Jameel ◽  
S Ahmad
Keyword(s):  
Quality Control ◽  
Control Analysis ◽  
Quality Control Analysis

ANALISA POTENSI MINYAK DAN GAS BUMI DENGAN ATRIBUT SEISMIK PADA BATUAN KARBONAT LAPANGAN *ZEFARA* CEKUNGAN SUMATRA SELATAN

KURVATEK ◽  
2017 ◽  
Vol 1 (2) ◽  
pp. 21-31
Author(s):  
Fatimah Miharno
Keyword(s):  
Instantaneous Frequency ◽  
Carbonate Reservoir ◽  
Control Analysis ◽  
High Porosity ◽  
Hydrocarbon Accumulation ◽  
Seismic Attribute ◽  
Data Set ◽  
Log Data ◽  
Low Amplitude ◽  
Rms Amplitude

ABSTRACT*Zefara* Field formation Baturaja on South Sumatra Basin is a reservoir carbonate and prospective gas. Data used in this research were 3D seismik data, well logs, and geological information. According to geological report known that hidrocarbon traps in research area were limestone lithological layer as stratigraphical trap and faulted anticline as structural trap. The study restricted in effort to make a hydrocarbon accumulation and a potential carbonate reservoir area maps with seismic attribute. All of the data used in this study are 3D seismic data set, well-log data and check-shot data. The result of the analysis are compared to the result derived from log data calculation as a control analysis. Hydrocarbon prospect area generated from seismic attribute and are divided into three compartments. The seismic attribute analysis using RMS amplitude method and instantaneous frequency is very effective to determine hydrocarbon accumulation in *Zefara* field, because low amplitude from Baturaja reservoir. Low amplitude hints low AI, determined high porosity and high hydrocarbon contact (HC).  Keyword: Baturaja Formation, RMS amplitude seismic attribute, instantaneous frequency seismic attribute

Risk Control Techniques for Social Investing

CFA Digest ◽  
2002 ◽  
Vol 32 (2) ◽  
pp. 93-94
Author(s):  
William H. Sackley
Keyword(s):  
Risk Control ◽  
Control Techniques ◽  
Social Investing
Sign in / Sign up

Export Citation Format

Share Document