The present study suggested a mass change prediction model for sulfate attack of concrete containing mineral admixtures through an immersion test in sulfate solutions. For this, 100% OPC as well as binary and ternary blended cement concrete specimens were manufactured by changing the types and amount of mineral admixture. The concrete specimens were immersed in fresh water, 10% sodium sulfate solution, and 10% magnesium sulfate solution, respectively, and mass change of the specimens was measured at 28, 56, 91, 182, and 365 days. The experimental results indicated that resistance of concrete containing mineral admixture against sodium sulfate attack was far greater than that of 100% OPC concrete. However, in terms of resistance against magnesium sulfate attack, concrete containing mineral admixture was lower than 100% OPC concrete due to the formation of magnesium silicate hydrate (M-S-H), the noncementitious material. Ultimately, based on the experimental results, a mass change prediction model was suggested and it was found that the prediction values using the model corresponded relatively well with the experimental results.
A comparable study on the deterioration of concrete under sodium sulfate and magnesium sulfate attack