Displacement Velocity and Strain Analysis of Opak Fault Monitoring Stations

The Opak Fault is an active fault that can potentially cause earthquakes in Yogyakarta. Periodic monitoring of the Opak Fault activity was previously used more GNSS observation data from the measurement campaign by the Geodesi Geometri dan Geodesi Fisis (GGGF) Laboratory Team, Geodetic Engineering Department, Faculty of Engineering, Universitas Gadjah Mada. However, there are several CORS BIG stations located in Yogyakarta. The CORS BIG data is used to increase the precision of the Opak Fault monitoring station. Therefore, the addition of the CORS is evaluated to obtain a displacement in the monitoring station. The computation of the displacement velocity value of the Opak Fault monitoring station has been done before using the Linear Least Square Collocation and grid search methods. The other method, namely the kriging method, needs to be evaluated for producing a more precise displacement velocity value. The research data includes GNSS campaign and CORS BIG data for six years, 2013 to 2020. The CORS stations around DIY are JOGS and CBTL. The GNNS data were processed to determine the solution for the daily coordinate, displacement, and standard deviation values for each Opak Fault monitoring station. The displacement velocity value is generated by the Linear Least Square method then reduced from the influence of the Sunda Block. The velocity value is used in the strain value estimation around the Opak Fault area at each station using the kriging method combined with the gaussian sequential simulation technique. The estimated displacement velocities are examined for statistical significance compared to the research of Adam (2019) and Pinasti (2019). This research generates the value of the displacement velocity in the east and north components of 12.39 to 30.99 mm/year and 1.96 to -14.11 mm/year, respectively. The displacement direction of all monitoring stations is dominant to the southeast. The Sunda Block reduced the displacement velocity. The east and north components are -2.32 to 2.28 mm/year and -0.52 to 4.2 mm/year, respectively. The displacement direction is towards the northwest. The strain estimation using the kriging method combined with the gaussian sequential simulation technique obtained an average strain value of 0.05 microstrain/year. The result of the data processing at each station has different arrow lengths, meaning that each location has a different strain value.