scholarly journals Numerical Investigation on Pylon and Flush Wall Injection in Cold Coaxial Jets

2021 ◽  
Vol 1128 (1) ◽  
pp. 012035
Author(s):  
J. Sarathkumar Sebastin ◽  
S. Jeyakumar ◽  
K. Karthik ◽  
R. Sivakumar
2013 ◽  
Vol 86 ◽  
pp. 490-499 ◽  
Author(s):  
I. Klioutchnikov ◽  
H. Olivier ◽  
J. Odenthal

2017 ◽  
Vol 9 (3) ◽  
pp. 554-573
Author(s):  
Haitao Shi ◽  
Dawei Chen ◽  
Pei Wang ◽  
Nansheng Liu ◽  
Xiyun Lu

AbstractNumerical investigation of the underexpanded sonic coaxial jets is carried out using large eddy simulation for three typical inner nozzle lip-thicknesses. Various fundamental mechanisms dictating the flow phenomena including shock structure, shear layer evolution and sound production are investigated. It is found that the inner nozzle lip induces a recirculation zone between inner and outer jets, which significantly influences the behaviors of shock structures and shear layers. The sound properties of the coaxial jets are further analyzed in detail. As the inner lip-thickness increases, the helical screech mode switches to an axisymmetric one and high-frequency screech also occurs with an oscillation frequency of recirculation zone. Based on the temporal Fourier transform and correlation analysis, the primary sources of low- and high-frequency screeches are associated with the downstream shock cells in the jet column and the secondary shock structures in the outer annular jet, respectively. The proper orthogonal decomposition analysis reveals that the dominant structures constructed by the most energetic modes shift from the downstream shock cells region to the upstream secondary shock region as the lip-thickness increases. The results obtained in this study provide physical insight into the understanding of the mechanisms relevant to the coherent structures and sound properties in sonic coaxial jets.


2021 ◽  
pp. 146808742110178
Author(s):  
J Sarathkumar Sebastin ◽  
S Jeyakumar ◽  
K Karthik

The influence of pylon and wall injection in coaxial jets of a Dual Combustion Ramjet engine is numerically investigated in a non-reacting flow field. The supersonic combustor is modeled and analyzed using the commercial CFD software ANSYS 18.0. The three-dimensional compressible Reynolds-averaged Navier-Stokes (RANS) equations coupled with the SST k-ω turbulence model have been used to analyze the coaxial mixing characteristics of the jets. The numerical study is validated with the experimental data of the wall static pressures measured in the combustor’s flow direction. The pylon and wall injectors are located symmetrically at the gas generator’s exit nozzle, and the air is used as the injectant to simulate gaseous fuel. Three injection pressures are used for the study to understand the flow field characteristics in the injector regime. Also, the gas generator downstream direction is investigated. The shock waves generated from the gas generator nozzle enhance the mixing of the coaxial jets with minimum total pressure loss. The shock wave interactions are noticed with reducing intensity within the supersonic combustor for pylon injection, leading to higher total pressure loss than the wall injection. The pylon injection provides the spatial distribution of fuels compared to the wall injection in the coaxial supersonic flow field.


2016 ◽  
Vol 136 (3) ◽  
pp. 141-146 ◽  
Author(s):  
Akira Kawasaki ◽  
Kenichi Kubota ◽  
Ikkoh Funaki ◽  
Yoshihiro Okuno

Sign in / Sign up

Export Citation Format

Share Document