scholarly journals Path Loss and Channel Modeling at 3.5GHz for 5G Cellular System

2021 ◽  
Vol 1152 (1) ◽  
pp. 012006
Author(s):  
S Kh Al-Khero ◽  
Y M Abbosh
Author(s):  
Xiuhua Fu ◽  
Tian Ding ◽  
Rongqun Peng ◽  
Cong Liu ◽  
Mohamed Cheriet

AbstractThis paper studies the communication problem between UAVs and cellular base stations in a 5G IoT scenario where multiple UAVs work together. We are dedicated to the uplink channel modeling and the performance analysis of the uplink transmission. In the channel model, we consider the impact of 3D distance and multi-UAVs reflection on wireless signal propagation. The 3D distance is used to calculate the path loss, which can better reflect the actual path loss. The power control factor is used to adjust the UAV's uplink transmit power to compensate for different propagation path losses, so as to achieve precise power control. This paper proposes a binary exponential power control algorithm suitable for 5G networked UAV transmitters and presents the entire power control process including the open-loop phase and the closed-loop phase. The effects of power control factors on coverage probability, spectrum efficiency and energy efficiency under different 3D distances are simulated and analyzed. The results show that the optimal power control factor can be found from the point of view of energy efficiency.


2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Quadri Ramon Adebowale ◽  
Nasir Faruk ◽  
Kayode S. Adewole ◽  
Abubakar Abdulkarim ◽  
Lukman A. Olawoyin ◽  
...  

The importance of wireless path loss prediction and interference minimization studies in various environments cannot be over-emphasized. In fact, numerous researchers have done massive work on scrutinizing the effectiveness of existing path loss models for channel modeling. The difficulties experienced by the researchers determining or having the detailed information about the propagating environment prompted for the use of computational intelligence (CI) methods in the prediction of path loss. This paper presents a comprehensive and systematic literature review on the application of nature-inspired computational approaches in radio propagation analysis. In particular, we cover artificial neural networks (ANNs), fuzzy inference systems (FISs), swarm intelligence (SI), and other computational techniques. The main research trends and a general overview of the different research areas, open research issues, and future research directions are also presented in this paper. This review paper will serve as reference material for researchers in the field of channel modeling or radio propagation and in particular for research in path loss prediction.


Author(s):  
Theofilos Chrysikos ◽  
Stavros Kotsopoulos ◽  
Eduard Babulak

The aim of this chapter is to summarize and present recent findings in the field of wireless channel modeling that provide a new method for the reliable calculation of the statistical parameters of large-scale variations of the average received signal (shadow fading). This algorithm is theoretically based on a path loss estimation model that incorporates losses due to walls and floors. This has been confirmed to be the most precise mathematical tool for average signal strength prediction for various frequencies of interest and propagation environments. The total path loss is estimated as a sum of two independent attenuation processes: free space loss and losses due to obstacles. This solution allows for a direct and reliable calculation of the deviation of the fluctuations of the average received signal in an obstacle-dense environment.


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Juan Moreno García-Loygorri ◽  
César Briso-Rodríguez ◽  
Israel Arnedo ◽  
César Calvo ◽  
Miguel A. G. Laso ◽  
...  

Passenger trains and especially metro trains have been identified as one of the key scenarios for 5G deployments. The wireless channel inside a train car is reported in the frequency range between 26.5 GHz and 40 GHz. These bands have received a lot of interest for high-density scenarios with a high-traffic demand, two of the most relevant aspects of a 5G network. In this paper we provide a full description of the wideband channel estimating Power-Delay Profiles (PDP), Saleh-Valenzuela model parameters, time-of-arrival (TOA) ranging, and path-loss results. Moreover, the performance of an automatic clustering algorithm is evaluated. The results show a remarkable degree of coherence and general conclusions are obtained.


2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jatuporn Supramongkonset ◽  
Sarun Duangsuwan ◽  
Myo Myint Maw ◽  
Sathaporn Promwong

The purpose of this work was to investigate the air-to-air channel model (A2A-CM) for unmanned aerial vehicle- (UAV-) enabled wireless communications. Specifically, a low-altitude small UAV needs to characterize the propagation mechanisms from ground reflection. In this paper, the empirical path loss channel characterizations of A2A ground reflection CM based on different scenarios were presented by comparing the wireless communication modules for UAVs. Two types of wireless communication modules both WiFi 2.4 GHz and LoRa 868 MHz frequency were deployed to study the path loss channel characterization between Tx-UAV and Rx-UAV. To investigate the path loss, three types of experimental channel models, such as CM1 grass floor, CM2 soil floor, and CM3 rubber floor, were considered under the ground reflection condition. The analytical A2A Two-Ray (A2AT-R) model and the modified Log-Distance model were simulated to compare the correlation with the measurement data. The measurement results in the CM3 rubber floor scenario showed the impact from the ground reflection at 1 m to 3 m Rx-UAV altitudes both 2.4 GHz and 868 MHz which was converged to the A2AT-R model and related to the modified Log-Distance model above 3 m. It clear that there is no ground reflection effect from the CM1 grass floor and CM2 soil floor. This work showed that the analytical A2AT-R model and the modified Log-Distance model can deploy to model the path loss of A2A-CM by using WiFi and LoRa wireless modules.


IEEE Access ◽  
2015 ◽  
Vol 3 ◽  
pp. 1573-1580 ◽  
Author(s):  
George R. Maccartney ◽  
Theodore S. Rappaport ◽  
Mathew K. Samimi ◽  
Shu Sun

2014 ◽  
Vol 989-994 ◽  
pp. 4111-4114
Author(s):  
Yi Huai Yang ◽  
Li Fang Wang ◽  
Dong Ya Shen ◽  
Miao Yang

In order to build WBAN devices and design WBANs, it is imperative to study the characteristics of WBAN channel and model the channel accurately. WBAN channel models are so different from the traditional mobile channel models and there are few publications on them. In this paper, we studied the statistic characteristics of the WBAN channel based on the IEEE 802.15.6 models. We focus on body surface nodes to external nodes, simulated the path loss models on 820 MHz and 2.36 GHz at both LOS and NLOS situations. We also used the Gauss model to fit the statistic results of the path loss and obtained coefficients of Gauss model.


Sign in / Sign up

Export Citation Format

Share Document