scholarly journals Improving the Effectiveness of Stack Ventilation by Supplying an Outdoor Air Stream

2020 ◽  
Vol 809 ◽  
pp. 012008
Author(s):  
Katarzyna Gladyszewska-Fiedoruk ◽  
Manuel Ruiz de Adana
Keyword(s):  
Outdoor Air ◽  
Air Stream ◽  
Stack Ventilation

Three Dimensional Simulation of Ventilation Flow Through a Solar Windcatcher

2019 ◽  
Author(s):  
Peter Abdo ◽  
Rahil Taghipour ◽  
B. P. Huynh
Keyword(s):  
Natural Ventilation ◽  
Air Flow ◽  
Ventilation System ◽  
Three Dimensional ◽  
Windward Side ◽  
Efficient Design ◽  
Indoor Space ◽  
Wind Speeds ◽  
Air Stream ◽  
Stack Ventilation

Abstract Natural ventilation is the process of supplying and removing air through an indoor space by natural means. There are two types of natural ventilation occurring in buildings: winddriven ventilation and buoyancy driven or stack ventilation. The most efficient design for natural ventilation in buildings should implement both types of natural ventilation. Stack ventilation which is temperature induced is driven by buoyancy making it less dependent on wind and its direction. Heat emitted causes a temperature difference between two adjoining volumes of air, the warmer air will have lower density and be more buoyant thus will rise above the cold air creating an upward air stream. Combining the wind driven and the buoyancy driven ventilation will be investigated in this study through the use of a windcatcher natural ventilation system. Stack driven air rises as it leaves the windcatcher and it is replaced with fresh air from outside as it enters through the positively pressured windward side. To achieve this, CFD (computational fluid dynamics) tool is used to simulate the air flow in a three dimensional room fitted with a windcatcher based on the winddriven ventilation alone, buoyancy driven ventilation alone, and combined buoyancy and winddriven ventilation. Different wind speeds between 0 up to 2.5 m/s are applied and the total air flow rate through the windcatcher is investigated with and without temperature of 350 K applied at the windcatcher’s outlet wall. As the wind speed increased the efficiency of the solar windcatcher decreased.

Effect of Combining Buoyancy Driven and Winddriven Ventilation in a Two Dimensional Room Fitted With a Windcatcher

2017 ◽  
Author(s):  
Peter Abdo ◽  
B. P. Huynh
Keyword(s):  
Fluid Dynamics ◽  
Natural Ventilation ◽  
Ventilation System ◽  
Windward Side ◽  
Two Dimensional ◽  
Efficient Design ◽  
Indoor Space ◽  
Air Stream ◽  
Stack Ventilation ◽  
Natural Means

Natural ventilation is the process of supplying and removing air through an indoor space by natural means. There are two types of natural ventilation occurring in buildings: winddriven ventilation and buoyancy driven ventilation, or stack ventilation. The most efficient design for natural ventilation in buildings should implement both types of natural ventilation. Stack ventilation which is temperature induced is driven by buoyancy making it less dependent on wind and its direction. Heat emitted causes a temperature difference between two adjoining volumes of air, the warmer air will have lower density and be more buoyant thus will rise above the cold air creating an upward air stream. Combining the winddriven and the buoyancy driven ventilation will be investigated in this study through the use of a windcatcher natural ventilation system. Stack driven air rises as it leaves the windcatcher and it is replaced with fresh air from outside as it enters through the positively pressured windward side. To achieve this, CFD (computational fluid dynamics) tool is used to simulate the air flow in a two dimensional room fitted with a windcatcher based on the winddriven ventilation alone and on the combined buoyancy and winddriven ventilation.

Indoor and outdoor air quality monitoring in hemp house — Case study

2011 ◽  
Vol 6 (3) ◽  
pp. 63-72 ◽  
Author(s):  
Jarmila Rimbalová ◽  
Silvia Vilčeková ◽  
Adriana Eštoková
Keyword(s):  
Air Quality ◽  
Quality Monitoring ◽  
Air Quality Monitoring ◽  
Outdoor Air ◽  
Outdoor Air Quality ◽  
Indoor And Outdoor

Pollutant emission from a heat station supplied with agriculture biomass and wood pellet mixture

2012 ◽  
Vol 33 (2) ◽  
pp. 231-242 ◽  
Author(s):  
Marek Juszczak ◽  
Katarzyna Lossy
Keyword(s):  
Carbon Monoxide ◽  
Pollutant Emission ◽  
Heat Output ◽  
Wood Pellets ◽  
Wood Pellet ◽  
Carbon Monoxide Concentration ◽  
Heat Efficiency ◽  
Air Stream ◽  
Fuel Mixtures ◽  
Lower Carbon

Pollutant emission from a heat station supplied with agriculture biomass and wood pellet mixtureTests for combustion of hay and sunflower husk pellets mixed with wood pellets were performed in a horizontal-feed as well as under-feed (retort) wood pellet furnace installed in boilers with a nominal heat output of 15 and 20 kW, located in a heat station. During the combustion a slagging phenomenon was observed in the furnaces. In order to lower the temperature in the furnace, fuel feeding rate was reduced with unaltered air stream rate. The higher the proportion of wood pellets in the mixture the lower carbon monoxide concentration. The following results of carbon monoxide concentration (in mg/m3presented for 10% O2content in flue gas) for different furnaces and fuel mixtures (proportion in wt%) were obtained: horizontal-feed furnace supplied with hay/wood: 0/100 - 326; 30/70 - 157; 50/50 - 301; 100/0 - 3300; horizontal-feed furnace supplied with sunflower husk/wood: 50/50 - 1062; 67/33 - 1721; 100/0 - 3775; under-feed (retort) furnace supplied with hay/wood: 0/100 - 90; 15/85 - 157; 30/70 - 135; 50/50 - 5179; under-feed furnace supplied with sunflower husk/wood: 67/33 - 2498; 100/0 - 3128. Boiler heat output and heat efficiency was low: 7 to 13 kW and about 55%, respectively, for the boiler with horizontal-feed furnace and 9 to 14 kW and 64%, respectively, for the boiler with under-feed furnace.

Sign in / Sign up

Export Citation Format

Share Document