scholarly journals Mechanical Properties and Melt Flow Index of Poly (butylene succinate) Blended with a Small Amount of Natural Rubber Compound

2020 ◽  
Vol 965 ◽  
pp. 012026
Author(s):  
W Singsang ◽  
P Rumjuan ◽  
Y Ausungnoen ◽  
W Charentanom ◽  
N Srakaew ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Melt Flow Index ◽  
Flow Index ◽  
Rubber Compound ◽  
Melt Flow ◽  
Butylene Succinate

Comparison of Melt Flow and Mechanical Properties of Rice Husk and Kenaf Hybrid Composites

2013 ◽  
Vol 701 ◽  
pp. 42-46 ◽  
Author(s):  
Abd Aziz Noor Zuhaira ◽  
Rahmah Mohamed
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Rice Husk ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Melt Flow Index ◽  
Silica Content ◽  
Flow Index ◽  
Melt Flow

This research is to identify the difference in melt flow and mechanical properties in hybrid composites between kenaf and rice husk that each of the filler was compounded with composite material of calcium carbonate (CaCO3) and high density polyethylene (HDPE) in different loading amount. Different filler loading up to 30 parts of kenaf fibers and rice husk particulate were mixed with the fixed 30% amount of CaCO3. Compounded hybrid composite were prepared and tested for melt flow index, tensile and impact strength. Addition of both fillers had decreased melt flow index (MFI). MFI of rice husk/CaCO3 was higher than kenaf/CaCO3 in HDPE composites. Tensile strength, elongation at break and impact properties of both hybrid composites had decreased with increasing filler content. Tensile strength of kenaf/CaCO3 was higher than rice husk/CaCO3 due to intrinsic fiber structure of kenaf which has some reinforcing effect compared to rice husk. While, impact strength of rice husk/CaCO3 was improved with addition of filler but drastically decrease as the rice husk content were increased up to 30% due to high silica content in rice husk. The Youngs Modulus was increased with addition of natural fibers in CaCO3/HDPE composite.

scholarly journals Bio-Copolyesters of Poly(butylene succinate)(PBS) Containing Long Chain Bio-Based Glycol

2019 ◽  
Author(s):  
Karolina Stępień ◽  
Cathrine Miles ◽  
Andrew McClain ◽  
Ewa Wiśniewska ◽  
Peter Sobolewski ◽  
...  
Keyword(s):  
Linear Trend ◽  
Melt Flow Index ◽  
Pilot Scale ◽  
Elastic Behavior ◽  
Flow Index ◽  
Melt Flow ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
Weight Density ◽  
Long Chain

<p>Poly(butylene succinate) (PBS) is a thermoplastic and biodegradable polyester characterized by high rigidity due to its high crystallinity. However, the use of long chain biobased monomers to produce segmented copolymers is an effective strategy to tailor the properties of PBS, such as greater flexibility. In this paper, a series of aliphatic bio-copolyesters of poly(butylene succinate-dilinoleic succinate) (PBS-DLS) were successfully synthesized <i>via </i>a direct two-step polycondensation method using a semi-pilot scale reactor for melt polymerization and titanium dioxide/silicon dioxide coprecipitate catalyst (C-94). In this study, the thermal and mechanical properties were investigated and compared, focusing on the effect of varying the amount of biobased dilinoleic diol in the structure. With increasing amount of long chain diol, a decrease in molecular weight, density, and melt flow index was observed. The semicrystalline nature of the copolymers was confirmed using differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) methods. These copolymers exhibit two main transition temperatures and vary in softness and processing flexibility. Furthermore, in the DSC data a linear trend was observed with increasing wt.% of hard PBS segments, which can be described by the Gordon-Taylor equation. Increasing the soft DLS segment content in the copolymer series resulted in an increase in the elastic behavior of the polymers. The broad range of crystallization temperatures and melt flow index values indicates that a polyester library with customizable properties that spans PBS applications has been successfully obtained.</p>

Mixtures of Recycled Milk Pouches with a Virgin LDPE-LLDPE Blend

2005 ◽  
Vol 21 (3) ◽  
pp. 219-230 ◽  
Author(s):  
Arup Choudhury ◽  
Mandira Mukherjee ◽  
Basudam Adhikari
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Rheological Properties ◽  
Melt Flow Index ◽  
Flow Index ◽  
Thermal And Mechanical Properties ◽  
Melt Flow ◽  
Recycled Materials ◽  
Elongation At Break

The present investigation deals with the viability of the use of recycled milk pouch material, which is a 50:50 mixture of LDPE and LLDPE, and the scope for improvement of its properties by combining it with virgin LDPE-LLDPE (50/50). Melt flow index (MFI), rheological properties, thermal and mechanical properties of the pure materials and their formulated blends containing recycled milk pouches were studied. The properties of the recycled materials were not as satisfactory as those of the corresponding virgin materials. But a significant improvement in viscosity, crystallinity, tensile strength and elongation at break of the recycled LDPE-LLDPE material was achieved by blending it with the corresponding virgin LDPE-LLDPE blend.

scholarly journals Morphological and Mechanical Properties of Natural Rubber Compound/Poly(butylene succinate) Blend

2020 ◽  
Vol 840 ◽  
pp. 012013
Author(s):  
N Prasoetsopha ◽  
P Thainoi ◽  
R Jinnavat ◽  
W Charerntanom ◽  
A Hasook ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Rubber Compound ◽  
Butylene Succinate

scholarly journals Application of Physical Methods for the Detection of a Thermally Degraded Recycled Material in Plastic Parts Made of Polypropylene Copolymer

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 552
Author(s):  
Luboš Běhálek ◽  
Jozef Dobránsky ◽  
Martin Pollák ◽  
Martin Borůvka ◽  
Pavel Brdlík
Keyword(s):  
Mechanical Properties ◽  
Volume Flow Rate ◽  
Melt Flow Index ◽  
Bending Test ◽  
Flow Index ◽  
Melt Flow ◽  
Scanning Calorimetry ◽  
Physical Methods ◽  
Plastic Parts ◽  
Recycled Material

The paper deals with the possibility of applying physical methods to detect a thermally degraded recycled material in plastic parts made of polypropylene. Standard methods of evaluating the mechanical properties of the material under static tensile and bending stress, as well as under dynamic impact stress using the Charpy method, were used for the experimental measurements. The rheological properties of materials were monitored using a method involving measuring the melt flow index, while their thermal properties and oxidative stability were monitored using differential scanning calorimetry. Based on the methods used, it can be clearly stated that the most suitable technique for detecting thermally degraded recycled material in polypropylene is the method involving establishing the melt flow index. The bending test seems to be the most suitable method for detecting recycled material by measuring the material’s mechanical properties. Similarly to the melt volume flow rate (MVR) method, it was possible to unambiguously detect the presence of even a small amount of recycled material in the whole from measuring the material’s bending properties. It is clear from the results that in the short term, there may be no change in the useful properties of the parts, but in the long term the presence of degraded recycled material will have adverse consequences on their lifespan.

scholarly journals РОЗРОБКА НАПОВНЕНИХ ПОЛІОЛЕФІНОВИХ КОМПОЗИЦІЙ ДЛЯ ЛИТТЄВИХ ВИРОБІВ

2020 ◽  
Vol 140 (6) ◽  
pp. 95-103
Author(s):  
С. В. Сайтарли ◽  
В. П. Плаван ◽  
Л. С. Дзюбенко ◽  
О. С. Керенівський ◽  
Д. М. Євдокименко
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Injection Molding ◽  
Frost Resistance ◽  
Melt Flow Index ◽  
Production Costs ◽  
Flow Index ◽  
Melt Flow ◽  
Polyolefin Elastomer

To develop filled polymer compositions based on polypropylene with different contents of calcite concentrate as a filler and the newest polyolefin elastomer as a modifier; to define the influence of the compositions on their rheological and physico-mechanical properties for production injection molded goods. The values of viscosity, melt flow index, tensile strength, elongation, and impact strength and frost resistance of the compositions depending on their composition are determined by standard methods. The influence of calcite concentrate as a filler and polyolefin elastomer as a modifier on the rheological and mechanical properties of compositions has been determined. With an increase in the amount of filler the physical and mechanical properties of the filled compositions are reduce that is offset by introducing the newest polyolefin elastomer as a modifier in amount of 5 wt. %. Addition of 5 wt. % of polyolefin elastomer in the filled composition gives them frost resistance, wherein the impact strength is higher than for compositions without the modifier even after freezing for 30 days at -18°С. It has been determined that adding of the filler does not increase the viscosity of the compositions, which contradicts the traditional behavior of filled systems. The addition of 5 wt. % of polyolefin elastomer to the filled compositions with calcite concentrate up to 20 wt.% does not change the tensile strength of the compositions which is 24 MPa, but increases elongation by 2 times, impact strength by an average of 8,5 % and frost resistance after freezing compositions at -18 °C for 30 days by an average of 12,6 %. The research results of rheological and physic-mechanical properties allow choosing the rational composition to achieve the desired characteristics of the polymer material for production goods by injection molding. Melt flow index of the compositions increases with increasing amount of filler to 50 wt. %. which does not increase the production costs of the injection molding process in comparison with unfilled compositions.

Bio-Copolyesters of Poly(butylene succinate)(PBS) Containing Long Chain Bio-Based Glycol

2019 ◽  
Author(s):  
Karolina Stępień ◽  
Cathrine Miles ◽  
Andrew McClain ◽  
Ewa Wiśniewska ◽  
Peter Sobolewski ◽  
...  
Keyword(s):  
Linear Trend ◽  
Melt Flow Index ◽  
Pilot Scale ◽  
Elastic Behavior ◽  
Flow Index ◽  
Melt Flow ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
Weight Density ◽  
Long Chain

<p>Poly(butylene succinate) (PBS) is a thermoplastic and biodegradable polyester characterized by high rigidity due to its high crystallinity. However, the use of long chain biobased monomers to produce segmented copolymers is an effective strategy to tailor the properties of PBS, such as greater flexibility. In this paper, a series of aliphatic bio-copolyesters of poly(butylene succinate-dilinoleic succinate) (PBS-DLS) were successfully synthesized <i>via </i>a direct two-step polycondensation method using a semi-pilot scale reactor for melt polymerization and titanium dioxide/silicon dioxide coprecipitate catalyst (C-94). In this study, the thermal and mechanical properties were investigated and compared, focusing on the effect of varying the amount of biobased dilinoleic diol in the structure. With increasing amount of long chain diol, a decrease in molecular weight, density, and melt flow index was observed. The semicrystalline nature of the copolymers was confirmed using differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) methods. These copolymers exhibit two main transition temperatures and vary in softness and processing flexibility. Furthermore, in the DSC data a linear trend was observed with increasing wt.% of hard PBS segments, which can be described by the Gordon-Taylor equation. Increasing the soft DLS segment content in the copolymer series resulted in an increase in the elastic behavior of the polymers. The broad range of crystallization temperatures and melt flow index values indicates that a polyester library with customizable properties that spans PBS applications has been successfully obtained.</p>

Effects of Calcium Carbonate on Melt Flow and Mechanical Properties of Rice Husk/HDPE and Kenaf/HDPE Hybrid Composites

2013 ◽  
Vol 795 ◽  
pp. 286-289 ◽  
Author(s):  
Abd Aziz Noor Zuhaira ◽  
Mohamed Rahmah
Keyword(s):  
Mechanical Properties ◽  
Calcium Carbonate ◽  
Impact Strength ◽  
Rice Husk ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Melt Flow Index ◽  
Flow Index ◽  
Test Results ◽  
Melt Flow

In this research, calcium carbonate (CaCO3) was compounded with rice husk/high density polyethylene (HDPE) and kenaf/HDPE composite at different filler loadings to produce hybrid composites. Melt flow index (MFI) and mechanical properties of hybrid composite was investigated. From the test results, the addition of CaCO3 filler had decreased melt flow index (MFI) on both composites. In terms of mechanical properties, tensile strength, elongation at break and impact strength decreased, whereas Youngs Modulus increased with the increase of CaCO3 in both kenaf/HDPE and rice husk/HDPE composites. Impact strength of unfilled rice husk/HDPE composite was lower than unfilled kenaf/HDPE composite, however impact strength of CaCO3/rice husk/HDPE hybrid composite were found to have slightly higher than CaCO3/kenaf/HDPE hybrid composite with addition of 10% and 20% of CaCO3.

Sign in / Sign up

Export Citation Format

Share Document