scholarly journals Seismic moment tensor event screening

2020 ◽  
Vol 221 (1) ◽  
pp. 77-88
Author(s):  
Sean R Ford ◽  
Gordon D Kraft ◽  
Gene A Ichinose
Keyword(s):  
Seismic Moment ◽  
Moment Tensor ◽  
Test Site ◽  
Seismic Moment Tensor ◽  
Data Set ◽  
New Approach ◽  
Moment Tensors ◽  
Explosion Monitoring ◽  
Langevin Distribution ◽  
Monitoring Practice

SUMMARY Event screening is an explosion monitoring practice that aims to identify an event as an explosion (‘screened in’) or not (‘screened out’). Confidence in event screening can be increased if multiple independent approaches are used. We describe a new approach to event screening using the seismic moment tensor and its representation on the hypersphere, specifically the 5-sphere of 6-degree unit vectors representing the normalized symmetric moment tensor. The sample of moment tensors from an explosion data set is unimodal on the 5-sphere and can be parametrized by the Langevin distribution, which is sometimes referred to as the Normal distribution on the hypersphere. Screening is then accomplished by finding the angle from the explosion population mean to any newly measured moment tensor and testing if that angle is in the tail of the Langevin distribution (conservatively quantified as greater than 99.9 per cent of the cumulative density). We apply the screen to a sample of earthquakes from the Western USA and the September 2017 explosion and subsequent collapse at the Pungyye-Ri Test Site in North Korea. All the earthquakes and the collapse screen out, but the explosion does not.

scholarly journals Seismic moment tensors from synthetic rotational and translational ground motion: Green’s functions in 1-D versus 3-D

2020 ◽  
Vol 223 (1) ◽  
pp. 161-179
Author(s):  
S Donner ◽  
M Mustać ◽  
B Hejrani ◽  
H Tkalčić ◽  
H Igel
Keyword(s):  
Ground Motion ◽  
Seismic Moment ◽  
Structural Model ◽  
Moment Tensor ◽  
Waveform Inversion ◽  
Seismic Moment Tensor ◽  
Tectonic Event ◽  
Moment Tensors ◽  
Rotational Ground Motion ◽  
D Model

SUMMARY Seismic moment tensors are an important tool and input variable for many studies in the geosciences. The theory behind the determination of moment tensors is well established. They are routinely and (semi-) automatically calculated on a global scale. However, on regional and local scales, there are still several difficulties hampering the reliable retrieval of the full seismic moment tensor. In an earlier study, we showed that the waveform inversion for seismic moment tensors can benefit significantly when incorporating rotational ground motion in addition to the commonly used translational ground motion. In this study, we test, what is the best processing strategy with respect to the resolvability of the seismic moment tensor components: inverting three-component data with Green’s functions (GFs) based on a 3-D structural model, six-component data with GFs based on a 1-D model, or unleashing the full force of six-component data and GFs based on a 3-D model? As a reference case, we use the inversion based on three-component data and 1-D structure, which has been the most common practice in waveform inversion for moment tensors so far. Building on the same Bayesian approach as in our previous study, we invert synthetic waveforms for two test cases from the Korean Peninsula: one is the 2013 nuclear test of the Democratic People’s Republic of Korea and the other is an Mw  5.4 tectonic event of 2016 in the Republic of Korea using waveform data recorded on stations in Korea, China and Japan. For the Korean Peninsula, a very detailed 3-D velocity model is available. We show that for the tectonic event both, the 3-D structural model and the rotational ground motion, contribute strongly to the improved resolution of the seismic moment tensor. The higher the frequencies used for inversion, the higher is the influence of rotational ground motions. This is an important effect to consider when inverting waveforms from smaller magnitude events. The explosive source benefits more from the 3-D structural model than from the rotational ground motion. Nevertheless, the rotational ground motion can help to better constraint the isotropic part of the source in the higher frequency range.

scholarly journals Seismic Moment Tensor Solutions from GeoNet Data to Provide a Moment Magnitude Scale for New Zealand

2021 ◽  
Author(s):  
◽  
Elizabeth de Joux Robertson
Keyword(s):  
New Zealand ◽  
Seismic Moment ◽  
Moment Tensor ◽  
Velocity Model ◽  
Moment Tensor Inversion ◽  
Moment Magnitude ◽  
Seismic Moment Tensor ◽  
Waveform Data ◽  
Moment Tensors ◽  
The Moment

<p>The aim of this project is to enable accurate earthquake magnitudes (moment magnitude, MW) to be calculated routinely and in near real-time for New Zealand earthquakes. This would be done by inversion of waveform data to obtain seismic moment tensors. Seismic moment tensors also provide information on fault-type. I use a well-established seismic moment tensor inversion method, the Time-Domain [seismic] Moment Tensor Inversion algorithm (TDMT_INVC) and apply it to GeoNet broadband waveform data to generate moment tensor solutions for New Zealand earthquakes. Some modifications to this software were made. A velocity model can now be automatically used to calculate Green's functions without having a pseudolayer boundary at the source depth. Green's functions can be calculated for multiple depths in a single step, and data are detrended and a suitable data window is selected. The seismic moment tensor solution that has either the maximum variance reduction or the maximum double-couple component is automatically selected for each depth. Seismic moment tensors were calculated for 24 New Zealand earthquakes from 2000 to 2005. The Global CMT project has calculated CMT solutions for 22 of these, and the Global CMT project solutions are compared to the solutions obtained in this project to test the accuracy of the solutions obtained using the TDMT_INVC code. The moment magnitude values are close to the Global CMT values for all earthquakes. The focal mechanisms could only be determined for a few of the earthquakes studied. The value of the moment magnitude appears to be less sensitive to the velocity model and earthquake location (epicentre and depth) than the focal mechanism. Distinguishing legitimate seismic signal from background seismic noise is likely to be the biggest problem in routine inversions.</p>

Analysis of non-double-couple source mechanisms in an area of induced seismicity, West Texas (USA).

2021 ◽  
Author(s):  
Savvaidis Alexandros ◽  
Roselli Pamela
Keyword(s):  
Stress Field ◽  
Time Domain ◽  
Seismic Moment ◽  
Moment Tensor ◽  
P Wave ◽  
Seismic Moment Tensor ◽  
Ground Displacement ◽  
Moment Tensors ◽  
West Texas ◽  
Double Couple

&lt;p&gt;In the scope to investigate the possible interactions between injected fluids, subsurface geology, stress field and triggering earthquakes, we investigate seismic source parameters related to the seismicity in West Texas (USA). The analysis of seismic moment tensor is an excellent tool to understand earthquake source process kinematics; moreover, changes in the fluid volume during faulting leads to existence of non-double-couple (NDC) components (Frohlich, 1994; Julian et al., 1998; Miller et al., 1998). The NDC percentage in the source constitutes the sum of absolute ISO and CLVD components so that %NDC= % ISO + %CLVD and %ISO+%CLVD+%DC=100%. It is currently known that the presence of NDC implies more complex sources (mixed shear-tensile earthquakes) correlated to fluid injections, geothermal systems and volcano-seismology where induced and triggered seismicity is observed.&lt;/p&gt;&lt;p&gt;With this hypothesis, we analyze the micro-earthquakes (M &lt;2 .7) recorded by the Texas Seismological Network (TexNet) and a temporary network constituted by 40 seismic stations (equipped by either broadband or 3 component geophones). Our study area is characterized by Northwest-Southeast faults that follow the local stress/field (SH&lt;sub&gt;max&lt;/sub&gt;) and the geological characteristic of the shallow basin structure of the study area. After a selection based on signal-to-noise ratio, we filter (1-50 Hz) the seismograms and estimate P-wave pulse polarities and the first P-wave ground displacement pulse in time domain. Then, we perform the full moment tensor analysis by using hybridMT technique (Andersen, 2001; Kwiatek et al., 2016) with a detailed 1D velocity model. The key parameter is the polarity/area of the first P-wave ground displacement pulse in time domain. Uncertainties of estimated moment tensors are expressed by normalized root-mean-square (RMS errors) between theoretical and estimated amplitudes (Vavricuk et al., 2014). We also evaluate the quality of the seismic moment tensors by bootstrap and resampling. In our preliminary results we obtain NDC percentage (in terms of %ISO and %CLVD components), Mw, seismic moment, P, T and B axes orientation for each source inverted.&lt;/p&gt;

scholarly journals Non double couple seismic sources, faults interaction and hypothesis of self-organized criticality

2005 ◽  
Vol 5 (1) ◽  
pp. 11-15 ◽  
Author(s):  
S. Yunga ◽  
A. Lutikov ◽  
O. Molchanov
Keyword(s):  
Seismic Moment ◽  
Moment Tensor ◽  
Regional Scale ◽  
Small Scale ◽  
Scaling Relations ◽  
Seismic Moment Tensor ◽  
Data Set ◽  
Geological Unit ◽  
Double Couple ◽  
Deformation Modes

Abstract. Non double couple (NDC) sources are considered in framework of the hypothesis that the process of seismic rupture can be viewed as a result of complicated fault geometry and its segmentation. Analytical approach is found to reveal reliability of NDC measure taking into consideration the values of seismic moment tensor errors. The study focuses on the comparison of the deformation modes of the NDC sources with the stress states in its vicinity. The deformation modes of faulting and fracturing at a small scale in NDC earthquake focus and at regional scale in geological unit were investigated using at the last case summation of seismic moment tensors. These local and regional deformation modes in some of geodynamic regimes confirm the self-similarity assumption. For the whole data set scaling relations seem to be more complicated. This feature implies that besides stresses second order factors, as the hydrothermal or magmatic pore fluids in rock, influence source characteristics and bring new complications in scaling relations.

scholarly journals Rotational Ground Motion Measurements for Regional Seismic Moment Tensors: a Review

2021 ◽  
Author(s):  
Stefanie Donner
Keyword(s):  
Ground Motion ◽  
Seismic Moment ◽  
Spatial Scales ◽  
Moment Tensor ◽  
Waveform Inversion ◽  
Seismic Source ◽  
Seismic Moment Tensor ◽  
Moment Tensors ◽  
Rotational Ground Motion ◽  
Motion Measurements

Seismic moment tensors are an important tool in geosciences on all spatial scales and for a broad range of applications. The basic underlying theory is established since decades. However, various factors influence the reliability of the inversion result, several of them are mutually dependent. Hence, a reliable retrieval of seismic moment tensors is still hampered in many cases, especially at regional event-receiver distances.To sample the entire wavefield due to a seismic source we need six components: three translational and three rotational ones. Up to now, only translational ground motion recordings were used for moment tensor retrieval, missing out valuable information. Using rotational in addition to the classical translational ground motions during waveform inversion for moment tensors mainly adds information on the vertical displacement gradient to the inversion problem. Furthermore, having available six instead of only three components per receiver location provides additional constraints on the sampling of the radiation pattern. As a result, the moment tensor components are resolved with higher precision and accuracy, even when the number of recording receivers is considerably reduced. Especially, components with a dependence to depth as well as the centroid depth can benefit significantly from additional rotational ground motion. Up to the time of writing this review only a few studies are published on the topic. Here, I summarise their findings and provide an overview over the possible capabilities of including rotational ground motion measurements to waveform inversion for seismic moment tensor retrieval.

scholarly journals Seismic Moment Tensor Solutions from GeoNet Data to Provide a Moment Magnitude Scale for New Zealand

2021 ◽  
Author(s):  
◽  
Elizabeth de Joux Robertson
Keyword(s):  
New Zealand ◽  
Seismic Moment ◽  
Moment Tensor ◽  
Velocity Model ◽  
Moment Tensor Inversion ◽  
Moment Magnitude ◽  
Seismic Moment Tensor ◽  
Waveform Data ◽  
Moment Tensors ◽  
The Moment

<p>The aim of this project is to enable accurate earthquake magnitudes (moment magnitude, MW) to be calculated routinely and in near real-time for New Zealand earthquakes. This would be done by inversion of waveform data to obtain seismic moment tensors. Seismic moment tensors also provide information on fault-type. I use a well-established seismic moment tensor inversion method, the Time-Domain [seismic] Moment Tensor Inversion algorithm (TDMT_INVC) and apply it to GeoNet broadband waveform data to generate moment tensor solutions for New Zealand earthquakes. Some modifications to this software were made. A velocity model can now be automatically used to calculate Green's functions without having a pseudolayer boundary at the source depth. Green's functions can be calculated for multiple depths in a single step, and data are detrended and a suitable data window is selected. The seismic moment tensor solution that has either the maximum variance reduction or the maximum double-couple component is automatically selected for each depth. Seismic moment tensors were calculated for 24 New Zealand earthquakes from 2000 to 2005. The Global CMT project has calculated CMT solutions for 22 of these, and the Global CMT project solutions are compared to the solutions obtained in this project to test the accuracy of the solutions obtained using the TDMT_INVC code. The moment magnitude values are close to the Global CMT values for all earthquakes. The focal mechanisms could only be determined for a few of the earthquakes studied. The value of the moment magnitude appears to be less sensitive to the velocity model and earthquake location (epicentre and depth) than the focal mechanism. Distinguishing legitimate seismic signal from background seismic noise is likely to be the biggest problem in routine inversions.</p>

scholarly journals HybridMT: A MATLAB/Shell Environment Package for Seismic Moment Tensor Inversion and Refinement

2016 ◽  
Vol 87 (4) ◽  
pp. 964-976 ◽  
Author(s):  
Grzegorz Kwiatek ◽  
Patricia Martínez‐Garzón ◽  
Marco Bohnhoff
Keyword(s):  
Seismic Moment ◽  
Moment Tensor ◽  
Moment Tensor Inversion ◽  
Seismic Moment Tensor

Seismic Moment Tensor Inversion of an Induced Microseismic Event, Offshore Norway: An Insight into the Possible Cause of Wellbore Liner Failure during a Drilling Operation

2021 ◽  
Vol 92 (6) ◽  
pp. 3460-3470
Author(s):  
Zoya Zarifi ◽  
Fredrik Hansteen ◽  
Florian Schopper
Keyword(s):  
Seismic Moment ◽  
Moment Tensor ◽  
Moment Tensor Inversion ◽  
Seismic Moment Tensor ◽  
Isotropic Component ◽  
High Pump ◽  
Dc Component ◽  
Pump Pressure ◽  
Microseismic Event ◽  
Possible Cause

Abstract A microseismic event with Mw∼0.8 was recorded at the Grane oilfield, offshore Norway, in June 2015. This event is believed to be associated with a failure of the wellbore liner in well 25/11-G-8 A. The failure mechanism has been difficult to explain from drilling parameters and operational logs alone. In this study, we analyzed the detected microseismic event to shed light on the possible cause of this event. We inverted for the seismic moment tensor, analyzed the S/P amplitude ratio and radiation pattern of seismic waves, and then correlated the microseismic data with the drilling reports. The inverted seismic moment indicates a shear-tensile (dislocation) event with a strong positive isotropic component (67% of total energy) accompanied by a positive compensated linear vector dipole (CLVD) and a reverse double-couple (DC) component. Drilling logs show a strong correlation between high pump pressure and the occurrence of several microseismic events during the drilling of the well. The strongest microseismic event (Mw∼0.8) occurred during peak pump pressure of 277 bar. The application of high pump pressure was associated with an attempt to release the liner hanger running tool (RT) in the well, which had been obstructed. Improper setting of the liner hanger could have caused the forces from the RT release to be transferred to the liner and might have resulted in ripping and parting of the pipe. The possible direct impact of the ripped liner with the formation or the likely sudden hydraulic pressure exposure to the formation caused by the liner ripping may explain the estimated isotropic component in the moment tensor inversion in the well. This impact can promote slip along the pre-existing fractures (the DC component). The presence of gas in the formation or the funneled fluid to the formation caused by the liner ripping may explain the CLVD component.

Sign in / Sign up

Export Citation Format

Share Document