scholarly journals Design configurations analysis of wind-induced natural ventilation tower in hot humid climate using computational fluid dynamics

2013 ◽  
Vol 10 (4) ◽  
pp. 332-346 ◽  
Author(s):  
Chin Haw Lim ◽  
Omidreza Saadatian ◽  
Kamaruzzaman Sopian ◽  
M. Yusof Sulaiman ◽  
Sohif Mat ◽  
...  
2019 ◽  
Vol 11 (20) ◽  
pp. 5691 ◽  
Author(s):  
Hankun Lin ◽  
Yiqiang Xiao ◽  
Florian Musso ◽  
Yao Lu

High-density urban development areas have several problems associated with them, such as the formation of urban heat islands, traffic noise, and air pollution. To minimize these problems, the green façades (GFs), which are used to guide climbing plants to grow vertically on building facade, are focused on by researchers and architects. This study focuses on GF application strategies and their optimizations for thermal comfort in a transitional space in a hot-humid climate. First, field measurements were collected from GF projects located in Guangzhou, China, in summer 2017. Second, a simulation method using computational fluid dynamics (CFD) was used to investigate the thermal effects of the GF’s foliage. Finally, seven GF typologies and one unshaded comparison model were used for simulations in three scenarios with south, east, and west orientations and compared to evaluate the effects of GFs on the thermal environment of the transitional space. The results of field measurements reveal that the GF reduced average Physiologically Equivalent Temperature (PET) by 2.54 °C, and that of CFD simulations reveal that three typologies of GFs are more effective in regulating the thermal environment in the summer. The results of this research provide support for further studies on the thermal effectiveness and design options of GFs for human comfort.


Author(s):  
Peter Abdo ◽  
Rahil Taghipour ◽  
B. P. Huynh

Abstract Windcatcher has been used over centuries for providing natural ventilation using wind power, it is an effective passive method to provide healthy and comfortable indoor environment. The windcatcher’s function is based on the wind and on the stack effect resulting from temperature differences. Generally, it is difficult for wind to change its direction, and enter a room through usual openings, the windcatcher is designed to overcome such problems since they have vertical columns to help channel wind down to the inside of a building. The efficiency of a windcatcher is maximized by applying special forms of opening and exit. The openings depend on the windcatcher’s location and on its cross sectional area and shape such as square, rectangular, hexagonal or circular. In this study the effect of the inlet design is investigated to achieve better air flow and increase the efficiency of windcatchers. To achieve this, CFD (computational fluid dynamics) tool is used to simulate the air flow in a three dimensional room fitted with a windcatcher based on the different inlet designs. The divergent inlet has captured the highest air flow with a difference of approximately 3% compared to the uniform inlet and 5% difference compared to the bulging-convergent inlet.


2021 ◽  
Vol 29 (2) ◽  
Author(s):  
Maryam Qays Oleiwi ◽  
Mohd Farid Mohamed

Past years have witnessed the popularity of traditional Malay house as a common housing type in Malaysia. However, double-storey house has become one of the common types of low-rise housing in Malaysia. Several passive cooling strategies have been adopted to cope with the hot-humid climate of Malaysia. In this study, the thermal comfort of a double-storey house was examined when different passive cooling strategies that were adopted from traditional Malay houses were applied using IES-VE 2019 building simulation software. The simulation was conducted for various design strategies such as changing concrete roof tiles to clay roof tiles, adding two small openings to the attic, removing the ceiling between the upper floor and the attic, and extending the overhang by 50% of its length for all the four facades. All these strategies were tested and compared between full-day natural ventilation and without any ventilation. The thermal comfort of these strategies was graphically defined based on the operative temperature. These analyses revealed that protecting the building envelope by extending the overhang by 50% of its length for all the four facades could ensure the best thermal comfort is achieved compared to other selected strategies. Recommendations for further studies are also outlined in this paper.


Sign in / Sign up

Export Citation Format

Share Document