Skin grafts

2021 ◽  
pp. 35-38
Author(s):  
Siobhan O’Ceallaigh ◽  
Mamta Shah

Skin grafts are an option for closing skin defects that cannot be closed primarily. A skin graft consists of epidermis and a portion of the underlying dermis that is detached from its blood supply and transferred to another location, usually on the same individual (an autograft). Skin grafts can also be used from cadaver donors (allografts) in extensive burn injuries, but as the recipient’s immune system will eventually reject this foreign tissue, this is only a temporary measure.

2021 ◽  
Vol 42 (Supplement_1) ◽  
pp. S83-S84
Author(s):  
Kevin N Foster ◽  
Joseph Molnar ◽  
William L Hickerson ◽  
Jeanne Lee ◽  
Brett C Hartman ◽  
...  

Abstract Introduction Management of extensive burn injuries is complicated often resulting in significant morbidity and mortality. Current standard of care includes use of split-thickness skin grafts (STSG) to obtain definitive closure; however, this treatment is often limited by donor site availability, which requires repeated re-harvesting of donor sites to obtain definitive closure in large total body surface area injuries. Additionally, this limitation often leads to increased risk of infection, hypertrophic scarring, and extended hospital length of stay. Autologous skin cell suspension (ASCS) prepared using the autologous cell harvesting device is an FDA approved point-of-care regenerative medicine technology that significantly reduces donor skin requirements to achieve definitive closure in acute thermal burn injuries across small and large burns. A prospective uncontrolled observational study (IDE 15945—NCT02992249) was conducted in which patients with life-threatening burn injuries were treated with ASCS. In this study, clinical outcomes were evaluated when ASCS was used in combination with wide meshed autografts for burn site treatment. Within the study, a subset of donor sites was also treated with ASCS and the purpose of the current work was to evaluate the clinical outcomes obtained to better understand impact on healing times and effect of re-harvesting in this compromised patient population. Methods ASCS was applied to the donor site after harvesting of split-thickness skin grafts. Clinical outcomes out to one year were evaluated, including the percentage of re-epithelialization, long-term cosmetic outcomes, and adverse events. Results Subjects (n=96) from 22 burn centers received ASCS as part of their donor site treatment regimen (n=528). Mean subject baseline demographics were: 30.2 years of age, 54.0 ± 17.4% TBSA injury, and 89.4 ± 32.9 Baux score with 37% of subjects having a score greater than 100. Percentage of donor sites healed, defined as >95% re-epithelialization, was 37.1% and 82.7% after week 1 and week 2, respectively. Approximately 20% of the donor sites treated with ASCS were re-harvested multiple times following initial healing (up to four times). Of these donor sites 39.3% (n=84), 81.0% (n=79), and 85.7% (n=77) were healed by week 1, week 2, and week 4, respectively. Scar assessments conducted on 427 donor sites after one year showed the majority had matched or mildly mismatched color, pigment, and texture. Safety analyses of adverse events (AEs) following ASCS treatment were unlikely or unrelated to the device. Conclusions This study demonstrates successful use of ASCS to achieve closure of donor site wounds in patients with extensive burn injuries.


Author(s):  
Vivek Gupta ◽  
Arnab Chanda

Abstract Skin graft expansion is the key to the treatment of severe burn injuries requiring skin transplantation. While high expansions have been claimed by a majority of graft manufacturers, the realistic expansions reported to date with skin grafts are much lower. To clarify this discrepancy, we attempted to understand the biomechanics of skin grafts through the study of common graft pattern sizes, spacing, and orientation, and their influence on mesh expansion and induced stress. A novel skin simulant material and additive manufacturing were employed to develop the skin graft models. Tensile testing experiments were conducted to study expansion and overall stresses, and a finite element model (FEM) was used to characterize the local trends. At low strains (i.e., <1), the mesh expansion ratio was reported to be below 1, which increased up to 1.93 at a high strain of 2. The pattern size and spacing were not observed to affect the expansion much (i.e., <10%). With a change in orientation, the expansion decreased across all graft models and strains. High localized induced stresses were reported for high strains, which varied with graft orientation. The novel observations highlight the achievable expansions without overstressing, with standard slit patterning in skin grafts. These findings will not only help achieve better mesh expansion outcomes in burn surgeries but also guide the development of novel graft patterns for enhanced expansion in the future.


2021 ◽  
Vol 47 (8) ◽  
pp. 1135-1137
Author(s):  
Frank W. de Jongh ◽  
Sjaak Pouwels ◽  
Christien Weenen ◽  
Willem A. van den Bosch ◽  
Dion Paridaens

2014 ◽  
Vol 41 (4) ◽  
pp. 330 ◽  
Author(s):  
Jang Hwan Min ◽  
In Sik Yun ◽  
Dae Hyun Lew ◽  
Tai Suk Roh ◽  
Won Jai Lee

2012 ◽  
Vol 25 (01) ◽  
pp. 42-48 ◽  
Author(s):  
S. C. Ralphs ◽  
G Coronado ◽  
D. C. Sweet ◽  
J. Ward ◽  
C. P. Bloch ◽  
...  

SummaryObjective: To compare the hydro-surgical technique to traditional techniques for removal of subcutaneous tissue in the preparation of full-thickness skin grafts.Study design: Ex vivo experimental study and a single clinical case report.Sample population: Four canine cadavers and a single clinical case.Methods: Four sections of skin were harvested from the lateral flank of recently euthanatized dogs. Traditional preparation methods used included both a blade or scissors technique, each of which were compared to the hydro-surgical technique individually. Preparation methods were compared based on length of time for removal of the subcutaneous tissue from the graft, histologic grading, and measurable thickness as compared to an untreated sample.Results: The hydro-surgical technique had the shortest skin graft preparation time as compared to traditional techniques (p = 0.002). There was no significant difference in the histological grading or measurable subcutaneous thickness between skin specimens.Clinical significance: The hydro-surgical technique provides a rapid, effective debridement of subcutaneous tissue in the preparation of full-thickness skin grafts. There were not any significant changes in histological grade and subcutaneous tissue remaining among all treatment types. Additionally the hydro-surgical technique was successfully used to prepare a full-thickness meshed free skin graft in the reconstruction of a traumatic medial tarsal wound in a dog.Presented at the ACVS symposium during the resident seminar, Seattle, Washington,USA on October 22, 2010.


Author(s):  
Chia-Yu Kuo ◽  
Jung-Yu Kan ◽  
Chieh-Ni Kao ◽  
Fu Ou-Yang ◽  
Cheng-Che Wu ◽  
...  
Keyword(s):  

2011 ◽  
Vol 412 (7-8) ◽  
pp. 670
Author(s):  
Yi-ming Zhang ◽  
Ya-dong Fang ◽  
Yi-cheng Wang ◽  
Shao-liang Wang ◽  
Ze-yuan Lei ◽  
...  

Author(s):  
Vivek Gupta ◽  
Arnab Chanda

Abstract Severe burn injures lead to millions of fatalities every year due to lack of skin replacements. While skin is a very limited and expensive entity, split thickness skin grafting, which involves the projection of a parallel incision pattern on a small section of healthy excised skin, is typically employed to increase the expansion and cover a larger burn site. To date, the real expansion capacity of such grafts are low (<3 times) and insufficient for treatment of severe burn injuries. In this study, novel I-shaped auxetic incision patterns, which are known to exhibit high negative Poisson’s ratios, have been tested on the skin to investigate their expansion potential. Fourteen two-layer skin graft models with varying incision pattern parameters (i.e., length, spacing, and orientation) were developed using finite element modelling and tested under uniaxial and biaxial tensile loads. The Poisson’s ratio, meshing ratios, and induced stresses were quantified across all models. Graft models tested uniaxially along the orthogonal directions indicated opposite trends in generated Poisson’s ratios, as the length of the I-shape incisions were increased. Biaxially, with a symmetric and closely spaced I-shape pattern, graft meshing ratios up to 15.65 were achieved without overstressing the skin. Overall, the findings from the study indicated that expansion potentials much higher than that of traditional skin grafts can be achieved with novel I-shaped auxetic skin grafts, which would be indispensable for covering large wounds in severe burn injuries.


Sign in / Sign up

Export Citation Format

Share Document