scholarly journals Toroidal figures of equilibrium from a second-order accurate, accelerated SCF method with subgrid approach

2016 ◽  
Vol 464 (4) ◽  
pp. 4761-4776 ◽  
Author(s):  
J.-M. Huré ◽  
F. Hersant

By an ellipsoidal body is meant, in the present paper, any homogeneous body which can be arrived at by continuous distortion of an ellipsoid. If ƒ 0 = 0 is the equation of the ellipsoid from which we start, and e is a parameter, the distortion of the ellipsoid may be supposed to proceed by e increasing from the value e = 0 upwards, and the final figure may be taken to be ƒ 0 + e ƒ 1 + e 2 ƒ 2 + e 3 ƒ 3 + ... = 0. For very small distortions the first two terms will adequately represent the distorted figure, and as we pass to higher orders the remaining terms will enter successively. The potential problem, to some extent interesting in itself, derives its chief importance from its application to the determination of the possible figures of equilibrium of a rotating mass of liquid. Poincaré, using his ingenious method of double layers, has shown how the potential of an ellipsoidal body can be carried as far as the second-order terms when the distortion is small, but gives no indication of how it is possible to carry it further, and indeed his method is one which hardly seems susceptible of being developed further than he himself has developed it. It is clear, however, that progress with the problem of rotating liquids can only be made when a method is available for writing down the potential of an ellipsoidal body distorted as far as we please. I believe the method explained in the present paper will be found capable of giving the potential of a body distorted to any extent, although (for reasons which will be explained later) I have not in the present paper carried the calculations further than second-order terms.


Author(s):  
W. L. Bell

Disappearance voltages for second order reflections can be determined experimentally in a variety of ways. The more subjective methods, such as Kikuchi line disappearance and bend contour imaging, involve comparing a series of diffraction patterns or micrographs taken at intervals throughout the disappearance range and selecting that voltage which gives the strongest disappearance effect. The estimated accuracies of these methods are both to within 10 kV, or about 2-4%, of the true disappearance voltage, which is quite sufficient for using these voltages in further calculations. However, it is the necessity of determining this information by comparisons of exposed plates rather than while operating the microscope that detracts from the immediate usefulness of these methods if there is reason to perform experiments at an unknown disappearance voltage.The convergent beam technique for determining the disappearance voltage has been found to be a highly objective method when it is applicable, i.e. when reasonable crystal perfection exists and an area of uniform thickness can be found. The criterion for determining this voltage is that the central maximum disappear from the rocking curve for the second order spot.


1996 ◽  
Vol 43 (9) ◽  
pp. 1765-1771 ◽  
Author(s):  
M. W. HAMILTON and D. S. ELLIOTT

2012 ◽  
Vol 41 (2) ◽  
pp. 109-113 ◽  
Author(s):  
Sören Kliem ◽  
Christoph Kröger ◽  
Yve Stöbel-Richter ◽  
Kurt Hahlweg ◽  
Elmar Brähler

Zusammenfassung. Theoretischer Hintergrund: Der Partnerschaftsfragebogen (PFB) wird im deutschen Sprachraum zur Erfassung der Partnerschafts- und Ehequalität bevorzugt eingesetzt. Fragestellung: Neben der Überprüfung der Eindimensionalität der PFB-Subskalen (Streitverhalten, Zärtlichkeit, Gemeinsamkeit/Kommunikation) wird in der vorliegenden Arbeit überprüft, ob das Zusammenfassen der PFB-Subskalen zu einem Generalfaktor „Partnerschaftsqualität” angemessen ist. Methoden: Es wurden Daten einer Bevölkerungsstichprobe für die Bundesrepublik Deutschland genutzt (N = 1.289). Aufgrund der Abweichung von einer multivariaten Normalverteilung wurden konfirmatorische Faktorenanalysen mittels Maximum-Likelihood-Methode mit robusten Standardfehlern und einem mittelwertsadjustierten Chi2-Wert (Satorra-Bentler-scaled-χ2) durchgeführt. Ergebnisse: Es ergaben sich sowohl für die Eindimensionalität der PFB-Subskalen als auch für die Second-Order-Faktorenanalyse sehr gute Modellanapassungen. Schlussfolgerungen: Die Subsumierung der PFB-Items zu Skalenwerten sowie der PFB-Subskalen zu einem Gesamtwert kann als angemessen eingestuft werden.


Sign in / Sign up

Export Citation Format

Share Document