scholarly journals Land-surface processes and summer-cloud-precipitation characteristics in the Tibetan Plateau and their effects on downstream weather: a review and perspective

2020 ◽  
Vol 7 (3) ◽  
pp. 500-515 ◽  
Author(s):  
Yunfei Fu ◽  
Yaoming Ma ◽  
Lei Zhong ◽  
Yuanjian Yang ◽  
Xueliang Guo ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Vertical Direction ◽  
Heat Fluxes ◽  
Surface Processes ◽  
Convective Precipitation ◽  
The Tibetan Plateau ◽  
Land Surface Processes

Abstract Correct understanding of the land-surface processes and cloud-precipitation processes in the Tibetan Plateau (TP) is an important prerequisite for the study and forecast of the downstream activities of weather systems and one of the key points for understanding the global atmospheric movement. In order to show the achievements that have been made, this paper reviews the progress on the observations for the atmospheric boundary layer, land-surface heat fluxes, cloud-precipitation distributions and vertical structures by using ground- and space-based multiplatform, multisensor instruments and the effect of the cloud system in the TP on the downstream weather. The results show that the form drag related to the topography, land–atmosphere momentum and scalar fluxes is an important part of the parameterization process. The sensible heat flux decreased especially in the central and northern TP caused by the decrease in wind speeds and the differences in the ground-air temperatures. Observations show that the cloud and precipitation over the TP have a strong diurnal variation. Studies also show the compressed-air column in the troposphere by the higher-altitude terrain of the TP makes particles inside clouds vary at a shorter distance in the vertical direction than those in the non-plateau area so that precipitation intensity over the TP is usually small with short duration, and the vertical structure of the convective precipitation over the TP is obviously different from that in other regions. In addition, the influence of the TP on severe weather downstream is preliminarily understood from the mechanism. It is necessary to use model simulations and observation techniques to reveal the difference between cloud precipitation in the TP and non-plateau areas in order to understand the cloud microphysical parameters over the TP and the processes of the land boundary layer affecting cloud, precipitation and weather in the downstream regions.

Quantification of the relative role of land-surface processes and large-scale forcing in dynamic downscaling over the Tibetan Plateau

2016 ◽  
Vol 48 (5-6) ◽  
pp. 1705-1721 ◽  
Author(s):  
Yanhong Gao ◽  
Linhong Xiao ◽  
Deliang Chen ◽  
Fei Chen ◽  
Jianwei Xu ◽  
...  
Keyword(s):  
Tibetan Plateau ◽  
Land Surface ◽  
Large Scale ◽  
Surface Processes ◽  
The Tibetan Plateau ◽  
Relative Role ◽  
Dynamic Downscaling ◽  
Land Surface Processes

scholarly journals Last-decade progress in understanding and modeling the land surface processes on the Tibetan Plateau

2020 ◽  
Vol 24 (12) ◽  
pp. 5745-5758
Author(s):  
Hui Lu ◽  
Donghai Zheng ◽  
Kun Yang ◽  
Fan Yang
Keyword(s):  
Heat Transfer ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Organic Matter Content ◽  
Matter Content ◽  
Surface Processes ◽  
Soil Parameters ◽  
The Tibetan Plateau ◽  
Land Surface Processes ◽  
Near Surface

Abstract. Land surface models (LSMs) that simulate water and energy exchanges at the land–atmosphere interface are a key component of Earth system models. The Tibetan Plateau (TP) drives the Asian monsoon through surface heating and thus plays a key role in regulating the climate system in the Northern Hemisphere. Therefore, it is vital to understand and represent well the land surface processes on the TP. After an early review that identified key issues in the understanding and modeling of land surface processes on the TP in 2009, much progress has been made in the last decade in developing new land surface schemes and supporting datasets. This review summarizes the major advances. (i) An enthalpy-based approach was adopted to enhance the description of cryosphere processes such as glacier and snow mass balance and soil freeze–thaw transition. (ii) Parameterization of the vertical mixing process was improved in lake models to ensure reasonable heat transfer to the deep water and to the near-surface atmosphere. (iii) New schemes were proposed for modeling water flow and heat transfer in soils accounting for the effects of vertical soil heterogeneity due to the presence of high soil organic matter content and dense vegetation roots in surface soils or gravel in soil columns. (iv) Supporting datasets of meteorological forcing and soil parameters were developed by integrating multi-source datasets including ground-based observations. Perspectives on the further improvement of land surface modeling on the TP are provided, including the continuous updating of supporting datasets, parameter estimation through assimilation of satellite observations, improvement of snow and lake processes, adoption of data-driven and artificial intelligence methods, and the development of an integrated LSM for the TP.

scholarly journals Identifying Sensitive Model Parameter Combinations for Uncertainties in Land Surface Process Simulations over the Tibetan Plateau

Water ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1724 ◽  
Author(s):  
Fei Peng ◽  
Guodong Sun
Keyword(s):  
Tibetan Plateau ◽  
Soil Temperature ◽  
Land Surface ◽  
Surface Heat ◽  
Heat Fluxes ◽  
Surface Processes ◽  
Model Parameters ◽  
The Tibetan Plateau ◽  
Surface Heat Fluxes ◽  
Sensitive Parameter

Model parameters are among the primary sources of uncertainties in land surface models (LSMs). Over the Tibetan Plateau (TP), simulations of land surface processes, which have not been well captured by current LSMs, can significantly affect the accurate representations of the weather and climate impacts of the TP in numerical weather prediction and climate models. Therefore, to provide guidelines for improving the performance of LSMs over the TP, it is essential to quantify the uncertainties in the simulated land surface processes associated with model parameters and detect the most sensitive parameters. In this study, five observational sites were selected to well represent the land surfaces of the entire TP. The impacts of 28 uncertain parameters from the common land model (CoLM) on the simulated surface heat fluxes (including sensible and latent heat fluxes) and soil temperature were quantified using the approach of conditional nonlinear optimal perturbation related to parameters (CNOP-P). The results showed that parametric uncertainties could induce considerable simulation uncertainties in surface heat fluxes and soil temperature. Thus, errors in parameters should be reduced. To inform future parameter estimation efforts, a three-step sensitivity analysis framework based on the CNOP-P was applied to identify the most sensitive parameter combinations with four member parameters for sensible and latent heat fluxes as well as soil temperature. Additionally, the most sensitive parameter combinations were screened out and showed variations with the target state variables and sites. However, the combinations also bore some similarities. Generally, three or four members from the most sensitive combinations were soil texture related. Furthermore, it was only at the wetter sites that parameters related to vegetation were contained in the most sensitive parameter combinations. In the future, studies on parameter estimations through multiobjective or single-objective optimization can be conducted to improve the performance of LSMs over the TP.

Estimation of Land Surface Heat Fluxes over the Tibetan Plateau Using GMS Data

2007 ◽  
Vol 46 (2) ◽  
pp. 183-195 ◽  
Author(s):  
Yuichiro Oku ◽  
Hirohiko Ishikawa ◽  
Zhongbo Su
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Heat Fluxes ◽  
The Tibetan Plateau ◽  
Sensible Heat ◽  
Surface Heat Fluxes ◽  
Diurnal Range

Abstract A Surface Energy Balance System (SEBS) originally developed for the NOAA Advanced Very High Resolution Radiometer was applied to Geostationary Meteorological Satellite (GMS)-5 Visible/Infrared Spin-Scan Radiometer data that were supplemented with other meteorological data. GMS-5, which is a geostationary satellite, recorded continuous hourly information. Surface temperatures obtained from the GMS-5 data were entered into SEBS to estimate the hourly regional distribution of the surface heat fluxes over the Tibetan Plateau. The estimated fluxes are verified by using corresponding field observations. The diurnal cycle of estimated fluxes agreed well with the field measurements. For example, the diurnal range of the estimated sensible heat flux decreases from June to August. This reflects the change of dry to wet surface characteristics resulting from frequent precipitation during the summer monsoon. Over the Tibetan Plateau, the diurnal range of the surface temperature is as large as the annual range, so that the resultant sensible heat flux has a large diurnal variation. Thus, the hourly estimation based on the GMS data may contribute to a better understanding of the land surface–atmosphere interaction in this critical area.

scholarly journals Last Decade Progress in Understanding and Modeling the Land Surface Processes on the Tibetan Plateau

2020 ◽  
Author(s):  
Hui Lu ◽  
Donghai Zheng ◽  
Kun Yang ◽  
Fan Yang
Keyword(s):  
Heat Transfer ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Organic Matter Content ◽  
Surface Processes ◽  
Soil Parameters ◽  
Surface Model ◽  
The Tibetan Plateau ◽  
Land Surface Processes ◽  
Near Surface

Abstract. The Land Surface Model (LSM) that simulates water and energy exchanges at the land-atmosphere interface is a key component of the Earth system model. The Tibetan Plateau (TP) drives the Asian monsoon through surface heating and thus plays a key role in regulating the climate system in the Northern Hemisphere. Therefore, it's vital to understand and represent well the land surface processes on the TP. After an early review that identified key issues in the understanding and modelling of land surface processes on the TP in 2009, several progress have been made in the last decade in developing new land surface schemes and supporting datasets. This review summarizes the major advances, including (i) An enthalpy-based approach was adopted to enhance the description of cryosphere processes such as glacier/snow mass balance and soil freeze-thaw transition. (ii) Parameterization of the vertical mixing process was improved in lake models to ensure reasonable heat transfer to the deep water and to the near-surface atmosphere. (iii) New schemes were proposed for modelling water flow and heat transfer in soils accounting for the effects of vertical soil heterogeneity due to the presence of high soil organic matter content and dense vegetation roots in surface soils, or gravel in soil columns. (iv) Supporting datasets of meteorological forcing and soil parameters were developed by integrating multi-source datasets including ground-based observations. Perspectives on the further improvement of land surface modelling on the TP are provided, including the continuous updating of supporting datasets, parameter estimation through assimilation of satellite observations, improvement of snow and lake processes, and the development of an integrated LSM for the TP.

Trends of land surface heat fluxes on the Tibetan Plateau from 2001 to 2012

2017 ◽  
Vol 37 (14) ◽  
pp. 4757-4767 ◽  
Author(s):  
Cunbo Han ◽  
Yaoming Ma ◽  
Xuelong Chen ◽  
Zhongbo Su
Keyword(s):  
Tibetan Plateau ◽  
Land Surface ◽  
Surface Heat ◽  
Heat Fluxes ◽  
The Tibetan Plateau ◽  
Surface Heat Fluxes ◽  
Land Surface Heat Fluxes

scholarly journals Understanding precipitation recycling over the Tibetan Plateau using tracer analysis with WRF

2020 ◽  
Vol 55 (9-10) ◽  
pp. 2921-2937
Author(s):  
Yanhong Gao ◽  
Fei Chen ◽  
Gonzalo Miguez-Macho ◽  
Xia Li
Keyword(s):  
Tibetan Plateau ◽  
Land Surface ◽  
Precipitation Amount ◽  
Interaction Strength ◽  
Convective Precipitation ◽  
High Mountain ◽  
The Tibetan Plateau ◽  
Important Indicator ◽  
Precipitation Recycling ◽  
Atmosphere Interaction

Abstract The precipitation recycling (PR) ratio is an important indicator that quantifies the land-atmosphere interaction strength in the Earth system’s water cycle. To better understand how the heterogeneous land surface in the Tibetan Plateau (TP) contributes to precipitation, we used the water-vapor tracer (WVT) method coupled with the Weather Research and Forecasting (WRF) regional climate model. The goals were to quantify the PR ratio, in terms of annual mean, seasonal variability and diurnal cycle, and to address the relationships of the PR ratio with lake treatments and precipitation amount. Simulations showed that the PR ratio increases from 0.1 in winter to 0.4 in summer when averaged over the TP with the maxima centered at the headwaters of three major rivers (Yangtze, Yellow and Mekong). For the central TP, the highest PR ratio rose to over 0.8 in August, indicating that most of the precipitation was recycled via local evapotranspiration in summer. The larger daily mean and standard deviation of the PR ratio in summer suggested a stronger effect of land-atmosphere interactions on precipitation in summer than in winter. Despite the relatively small spatial extent of inland lakes, the treatment of lakes in WRF significantly impacted the calculation of the PR ratio over the TP, and correcting lake temperature substantially improved both precipitation and PR ratio simulations. There was no clear relationship between PR ratio and precipitation amount; however, a significant positive correlation between PR and convective precipitation was revealed. This study is beneficial for the understanding of land-atmosphere interaction over high mountain regions.

scholarly journals Surface-sensible and latent heat fluxes over the Tibetan Plateau from ground measurements, reanalysis, and satellite data

2014 ◽  
Vol 14 (11) ◽  
pp. 5659-5677 ◽  
Author(s):  
Q. Shi ◽  
S. Liang
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Vegetation Index ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Future Research ◽  
The Tibetan Plateau ◽  
Mean Square Errors

Abstract. Estimations from meteorological stations over the Tibetan Plateau (TP) indicate that since the 1980s the surface-sensible heat flux has been decreasing continuously, and modeling studies suggest that such changes are likely linked to the weakening of the East Asian Monsoon through exciting Rossby wave trains. However, the spatial and temporal variations in the surface-sensible and latent heat fluxes over the entire TP remain unknown. This study aims to characterize the spatial and seasonal variability of the surface-sensible and latent heat fluxes at 0.5° over the TP from 1984 to 2007 by synthesizing multiple data sources including ground measurements, reanalysis products, and remote-sensing products. The root mean square errors (RMSEs) from cross validation are 14.3 Wm−2 and 10.3 Wm−2 for the monthly fused sensible and latent heat fluxes, respectively. The fused sensible and latent heat-flux anomalies are consistent with those estimated from meteorological stations, and the uncertainties of the fused data are also discussed. The associations among the fused sensible and latent heat fluxes and the related surface anomalies such as mean temperature, temperature range, snow cover, and normalized difference vegetation index (NDVI) in addition to atmospheric anomalies such as cloud cover and water vapor show seasonal dependence, suggest that the land–biosphere–atmosphere interactions over the TP could display nonuniform feedbacks to the climate changes. It would be interesting to disentangle the drivers and responses of the surface-sensible and latent heat-flux anomalies over the TP in future research from evidences of modeling results.

Sign in / Sign up

Export Citation Format

Share Document