Boundary Layers

2018 ◽  
Author(s):  
S. G. Rajeev
Keyword(s):  
Boundary Layer ◽  
Fluid Velocity ◽  
One Dimension ◽  
Navier Stokes ◽  
Analytic Approximation ◽  
Navier Stokes Equation ◽  
Velocity Gradients ◽  
Thin Region ◽  
Large Velocity ◽  
Different Dimensions

It is found experimentally that all the components of fluid velocity (not just thenormal component) vanish at a wall. No matter how small the viscosity, the large velocity gradients near a wall invalidate Euler’s equations. Prandtl proposed that viscosity has negligible effect except near a thin region near a wall. Prandtl’s equations simplify the Navier-Stokes equation in this boundary layer, by ignoring one dimension. They have an unusual scale invariance in which the distances along the boundary and perpendicular to it have different dimensions. Using this symmetry, Blasius reduced Prandtl’s equations to one dimension. They can then be solved numerically. A convergent analytic approximation was also found by H. Weyl. The drag on a flat plate can now be derived, resolving d’Alembert’s paradox. When the boundary is too long, Prandtl’s theory breaks down: the boundary layer becomes turbulent or separates from the wall.

The Influence of Boundary Layer Velocity Gradients and Bed Proximity on Vortex Shedding From Free Spanning Pipelines

1984 ◽  
Vol 106 (1) ◽  
pp. 70-78 ◽  
Author(s):  
A. J. Grass ◽  
P. W. J. Raven ◽  
R. J. Stuart ◽  
J. A. Bray
Keyword(s):  
Boundary Layer ◽  
Strouhal Number ◽  
Vortex Shedding ◽  
Combined Effects ◽  
Maximum Increase ◽  
Velocity Gradients ◽  
Large Velocity ◽  
Layer Velocity ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

The paper summarizes the results of a laboratory study of the separate and combined effects of bed proximity and large velocity gradients on the frequency of vortex shedding from pipeline spans immersed in the thick boundary layers of tidal currents. This investigation forms part of a wider project concerned with the assessment of span stability. The measurements show that in the case of both sheared and uniform approach flows, with and without velocity gradients, respectively, the Strouhal number defining the vortex shedding frequency progressively increases as the gap between the pipe base and the bed is reduced below two pipe diameters. The maximum increase in vortex shedding Strouhal number, recorded close to the bed in an approach flow with large velocity gradients, was of the order of 25 percent.

Coriolis force influence on the AKA effect

2021 ◽  
Author(s):  
Peter Rutkevich ◽  
Georgy Golitsyn ◽  
Anatoly Tur
Keyword(s):  
Steady State ◽  
Stokes Equation ◽  
Nonlinear Equations ◽  
Coriolis Force ◽  
Large Scale ◽  
Fluid Velocity ◽  
Navier Stokes ◽  
Basic Solution ◽  
Navier Stokes Equation ◽  
Alpha Effect

<p>Large-scale instability in incompressible fluid driven by the so called Anisotropic Kinetic Alpha (AKA) effect satisfying the incompressible Navier-Stokes equation with Coriolis force is considered. The external force is periodic; this allows applying an unusual for turbulence calculations mathematical method developed by Frisch et al [1]. The method provides the orders for nonlinear equations and obtaining large scale equations from the corresponding secular relations that appear at different orders of expansions. This method allows obtaining not only corrections to the basic solutions of the linear problem but also provides the large-scale solution of the nonlinear equations with the amplitude exceeding that of the basic solution. The fluid velocity is obtained by numerical integration of the large-scale equations. The solution without the Coriolis force leads to constant velocities at the steady-state, which agrees with the full solution of the Navier-Stokes equation reported previously. The time-invariant solution contains three families of solutions, however, only one of these families contains stable solutions. The final values of the steady-state fluid velocity are determined by the initial conditions. After account of the Coriolis force the solutions become periodic in time and the family of solutions collapses to a unique solution. On the other hand, even with the Coriolis force the fluid motion remains two-dimensional in space and depends on a single spatial variable. The latter fact limits the scope of the AKA method to applications with pronounced 2D nature. In application to 3D models the method must be used with caution.</p><p>[1] U. Frisch, Z.S. She and P. L. Sulem, “Large-Scale Flow Driven by the Anisotropic Kinetic Alpha Effect,” Physica D, Vol. 28, No. 3, 1987, pp. 382-392.</p>

scholarly journals Closed-Form Non-Stationary Solutionsfor Thermo and Chemovibrational Viscous Flows

Fluids ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 175 ◽  
Author(s):  
Dmitry Bratsun ◽  
Vladimir Vyatkin
Keyword(s):  
Viscous Flow ◽  
Closed Form ◽  
General Procedure ◽  
Fluid Velocity ◽  
Fluid Motion ◽  
Boussinesq Approximation ◽  
Navier Stokes ◽  
Chemical Transformations ◽  
Navier Stokes Equation ◽  
Harmonic Vibrations

A class of closed-form exact solutions for the Navier–Stokes equation written in the Boussinesq approximation is discussed. Solutions describe the motion of a non-homogeneous reacting fluid subjected to harmonic vibrations of low or finite frequency. Inhomogeneity of the medium arises due to the transversal density gradient which appears as a result of the exothermicity and chemical transformations due to a reaction. Ultimately, the physical mechanism of fluid motion is the unequal effect of a variable inertial field on laminar sublayers of different densities. We derive the solutions for several problems for thermo- and chemovibrational convections including the viscous flow of heat-generating fluid either in a plain layer or in a closed pipe and the viscous flow of fluid reacting according to a first-order chemical scheme under harmonic vibrations. Closed-form analytical expressions for fluid velocity, pressure, temperature, and reagent concentration are derived for each case. A general procedure to derive the exact solution is discussed.

scholarly journals Mathematical modelling of fluid flow in electromagnetically stirred weld pool

2021 ◽  
Vol 1201 (1) ◽  
pp. 012025
Author(s):  
K Enger ◽  
M G Mousavi ◽  
A Safari
Keyword(s):  
Fluid Flow ◽  
Grain Refinement ◽  
Weld Pool ◽  
Fluid Velocity ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Turbulent Fluid Flow ◽  
Flow Modelling ◽  
Weld Parameters ◽  
The Relationship

Abstract In this paper, a mathematical model has been proposed to study the relationship between electromagnetic stirring (EMS) weld parameters and the mode of fluid flow on grain refinement of AA 6060 weldments. For this purpose, fluid flow modelling using Navier-Stokes equation is described first, and then, the proposed mathematical approach has been discussed in detail. For demonstration, calculations to determine the fluid velocity in the weld pool of thin plate AA6060 were performed. The application of the model on the experimental results indicates that the best grain refinement is achieved at a transition mode from laminar to turbulent fluid flow.

scholarly journals A MAGNETOHYDRODYNAMIC STUDY OF BEHAVIOR IN AN ELECTROLYTE FLUID USING NUMERICAL AND EXPERIMENTAL SOLUTIONS

2012 ◽  
Vol 11 (1-2) ◽  
pp. 53
Author(s):  
L. P. Aoki ◽  
M. G. Maunsell ◽  
H. E. Schulz
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
Fluid Velocity ◽  
Flow Analysis ◽  
Test Chamber ◽  
Cross Product ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Vector Density ◽  
The Magnetic Field

This article examines a rectangular closed circuit filled with an electrolyte fluid, known as macro pumps, where a permanent magnet generates a magnetic field and electrodes generate the electric field in the flow. The fluid conductor moves inside the circuit under magnetohydrodynamic effect (MHD). The MHD model has been derived from the Navier Stokes equation and coupled with the Maxwell equations for Newtonian incompressible fluid. Electric and magnetic components engaged in the test chamber assist in creating the propulsion of the electrolyte fluid. The electromagnetic forces that arise are due to the cross product between the vector density of induced current and the vector density of magnetic field applied. This is the Lorentz force. Results are present of 3D numerical MHD simulation for newtonian fluid as well as experimental data. The goal is to relate the magnetic field with the electric field and the amounts of movement produced, and calculate de current density and fluid velocity. An u-shaped and m-shaped velocity profile is expected in the flows. The flow analysis is performed with the magnetic field fixed, while the electric field is changed. Observing the interaction between the fields strengths, and density of the electrolyte fluid, an optimal configuration for the flow velocity isdetermined and compared with others publications.

Role of Aspect Ratio and Joule Heating within the Fluid Region Near a Cylindrical Electrode in Electrokinetic Remediation: A Numerical Solution based on the Boundary Layer Model

2013 ◽  
Vol 11 (2) ◽  
pp. 687-699
Author(s):  
Mario A. Oyanader ◽  
Pedro E. Arce
Keyword(s):  
Boundary Layer ◽  
Numerical Solution ◽  
Joule Heating ◽  
Navier Stokes ◽  
Integral Model ◽  
Transfer Model ◽  
Layer Model ◽  
Navier Stokes Equation ◽  
Temperature Development

Abstract This contribution focuses on the analysis of the hydrodynamics taking place near an electrode of cylindrical geometry in electrokinetic applications. Both the temperature development conditions and Joule heating effect are included. A boundary layer approach has been used to model the hydrodynamic in the system. This is based on the heat transfer model, the continuity equation, and the Navier–Stokes equation. The resulting set of two partial differential equations mutually coupled is solved applying the Von Karman integral approximation. A numerical solution of the differential–integral model is used to illustrate the behavior of the systems under a variety of conditions.

Sign in / Sign up

Export Citation Format

Share Document