Energy from the biological conversion of solar energy

Trees and other forms of vegetation are well designed for the collection and storage of solar energy. Moreover, photosynthetic organisms show enormous diversity and are well adapted for a wide range of environments. Biomass is convertible to liquid and gaseous fuels by a number of established processes, and this paper examines the possible contribution of biomass to world energy demands. The maximum efficiency of solar energy conversion in plant production is 5-6 %, but plants grown under usual field conditions do not achieve this degree of conversion. The highest yielding crops convert solar energy into plant material with an efficiency of 1-2%, but the average yields of the major crops and forests indicate considerably lower efficiencies. The average efficiency of solar energy conversion on a global scale is estimated as about 0.15 %. The energy content of the annual biomass residues in Australia and U.S.A. is equal to about one-quarter of the primary energy use in those countries, but only about one-third of the residues are considered to be readily recoverable. A number of high yielding crops are examined as potential fuel crops. Energy inputs for growing non-irrigated crops in Australia are estimated to amount to 7-17 % of the solar energy stored in the total crop biomass. Irrigation adds considerably to the energy cost of producing crops. The overall energy efficiency of fuel production from biomass varies from 20 to 58%, depending on the nature of the biomass and the process used to produce liquid or gaseous fuel. A recent estimate by an Australian committee of the potential contribution of biomass to liquid fuel production in Australia is presented. It is concluded that biomass will not be able to provide a substantial fraction of the world’s energy demand, although it can make a useful contribution.

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 611 ◽  
Author(s):  
Anita Haeussler ◽  
Stéphane Abanades ◽  
Julien Jouannaux ◽  
Anne Julbe

Due to the requirement to develop carbon-free energy, solar energy conversion into chemical energy carriers is a promising solution. Thermochemical fuel production cycles are particularly interesting because they can convert carbon dioxide or water into CO or H2 with concentrated solar energy as a high-temperature process heat source. This process further valorizes and upgrades carbon dioxide into valuable and storable fuels. Development of redox active catalysts is the key challenge for the success of thermochemical cycles for solar-driven H2O and CO2 splitting. Ultimately, the achievement of economically viable solar fuel production relies on increasing the attainable solar-to-fuel energy conversion efficiency. This necessitates the discovery of novel redox-active and thermally-stable materials able to split H2O and CO2 with both high-fuel productivities and chemical conversion rates. Perovskites have recently emerged as promising reactive materials for this application as they feature high non-stoichiometric oxygen exchange capacities and diffusion rates while maintaining their crystallographic structure during cycling over a wide range of operating conditions and reduction extents. This paper provides an overview of the best performing perovskite formulations considered in recent studies, with special focus on their non-stoichiometry extent, their ability to produce solar fuel with high yield and performance stability, and the different methods developed to study the reaction kinetics.


2008 ◽  
Vol 80 (10) ◽  
pp. 2069-2077
Author(s):  
Sergei Varfolomeev

The kinetic model has been developed for disserting the efficiency of solar energy conversion as a function of light intensity. A comparison of theory with experimental results shows that the model provides a satisfactory agreement. We have estimated the essential parameters of photosynthetic systems (the size of the photosynthetic antenna, the rate of electron transport, the correlation between photosynthesis and respiration) that are responsible for reaching the maximum efficiency at "one sun" and "one hundred suns" light illumination intensities. Recommendations for the improvement of photosynthetic system parameters using genetic engineering methods are also provided.


Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2248
Author(s):  
Van Tan Tran ◽  
Huu-Quang Nguyen ◽  
Young-Mi Kim ◽  
Gyeongsik Ok ◽  
Jaebeom Lee

Issues related to global energy and environment as well as health crisis are currently some of the greatest challenges faced by humanity, which compel us to develop new pollution-free and sustainable energy sources, as well as next-generation biodiagnostic solutions. Optical functional nanostructures that manipulate and confine light on a nanometer scale have recently emerged as leading candidates for a wide range of applications in solar energy conversion and biosensing. In this review, recent research progress in the development of photonic and plasmonic nanostructures for various applications in solar energy conversion, such as photovoltaics, photothermal conversion, and photocatalysis, is highlighted. Furthermore, the combination of photonic and plasmonic nanostructures for developing high-efficiency solar energy conversion systems is explored and discussed. We also discuss recent applications of photonic–plasmonic-based biosensors in the rapid management of infectious diseases at point-of-care as well as terahertz biosensing and imaging for improving global health. Finally, we discuss the current challenges and future prospects associated with the existing solar energy conversion and biosensing systems.


2019 ◽  
Author(s):  
Juntai Liu ◽  
Vincent M. Friebe ◽  
Raoul N. Frese ◽  
Michael R. Jones

Natural photosynthesis can be divided between the chlorophyll-containing plants, algae and cyanobacteria that make up the oxygenic phototrophs and a diversity of bacteriochlorophyll-containing bacteria that make up the anoxygenic phototrophs. Photosynthetic light harvesting and reaction centre proteins from both groups of organisms have been exploited in a wide range of biohybrid devices for solar energy conversion, solar fuel synthesis and a variety of sensing technologies, but the energy harvesting abilities of these devices are limited by each protein’s individual palette of (bacterio)chlorophyll, carotenoid and bilin pigments. In this work we demonstrate a range of genetically-encoded, self-assembling photosystems in which recombinant plant light harvesting complexes are covalently locked with reaction centres from a purple photosynthetic bacterium, producing macromolecular chimeras that display mechanisms of polychromatic solar energy harvesting and conversion not present in natural systems. Our findings illustrate the power of a synthetic biology approach in which bottom-up construction of a novel photosystem using naturally disparate but mechanistically complementary components is achieved in a predictable fashion through the genetic encoding of adaptable, plug-and-play covalent interfaces.ToC image


2012 ◽  
Vol 65 (6) ◽  
pp. 643 ◽  
Author(s):  
Kastoori Hingorani ◽  
Warwick Hillier

This paper presents an overview of the prospects for bio-solar energy conversion. The Global Artificial Photosynthesis meeting at Lord Howe Island (14–18 August 2011) underscored the dependence that the world has placed on non-renewable energy supplies, particularly for transport fuels, and highlighted the potential of solar energy. Biology has used solar energy for free energy gain to drive chemical reactions for billions of years. The principal conduits for energy conversion on earth are photosynthetic reaction centres – but can they be harnessed, copied and emulated? In this communication, we initially discuss algal-based biofuels before investigating bio-inspired solar energy conversion in artificial and engineered systems. We show that the basic design and engineering principles for assembling photocatalytic proteins can be used to assemble nanocatalysts for solar fuel production.


2011 ◽  
Vol 36 (8) ◽  
pp. 928-934 ◽  
Author(s):  
Wongee Chun ◽  
Seung Jin Oh ◽  
Sang Hoon Lim ◽  
Kuan Chen

2015 ◽  
Vol 17 (44) ◽  
pp. 30013-30022 ◽  
Author(s):  
Scott K. Cushing ◽  
Alan D. Bristow ◽  
Nianqiang Wu

The plasmon's dephasing is used to calculate optimal design guidelines and the maximum efficiency for plasmon enhanced solar energy conversion.


Sign in / Sign up

Export Citation Format

Share Document