scholarly journals CODEX, a neural network approach to explore signaling dynamics landscapes

2020 ◽  
Author(s):  
Marc-Antoine Jacques ◽  
Maciej Dobrzyński ◽  
Paolo Armando Gagliardi ◽  
Raphael Sznitman ◽  
Olivier Pertz

AbstractFluorescent biosensors routinely yield thousands of single-cell, heterogeneous, multi-dimensional signaling trajectories that are difficult to mine for relevant information. We present CODEX, an approach based on artificial neural networks to guide exploration of time-series datasets and to identify motifs in dynamic signaling states.

2014 ◽  
pp. 30-34
Author(s):  
Vladimir Golovko

This paper discusses the neural network approach for computing of Lyapunov spectrum using one dimensional time series from unknown dynamical system. Such an approach is based on the reconstruction of attractor dynamics and applying of multilayer perceptron (MLP) for forecasting the next state of dynamical system from the previous one. It allows for evaluating the Lyapunov spectrum of unknown dynamical system accurately and efficiently only by using one observation. The results of experiments are discussed.


Author(s):  
M. Sailaja ◽  
R. D. V. Prasad

Nowadays the robot technology is advancing rapidly and the use of robots in industries has been increasing. In designing a robot manipulator, kinematicsplays a vital role. The kinematic problem of manipulator control is divided into two types, direct kinematics and inverse kinematics. Robot inverse kinematics, which is important in robot path planning, is a fundamental problem in robotic control. Past solutions for this problem have been through the use of various algebraic or algorithmic procedures, which may be less accurate and time consuming. Artificial neural networks have the ability to approximate highly non-linear functions applied in robot control. The neural network approach deserves examination because of the fundamental properties of computation speed, and they can generalize untrained solutions. In the present work an attempt has been made to evaluate the problemof robot inverse kinematics of Stanford manipulator using artificial neural network approach. Finally two programs are written using C language to solve inverse kinematic problem of Stanford manipulator using Back propagation method of artificial neural network. In this network, the input layer has six nodes, the hidden layer has three nodes, and the output layer has two nodes. And also Elbow manipulator was modelled and its direct kinematics was analysed.


1970 ◽  
Vol 34 (1) ◽  
pp. 33-56
Author(s):  
Sevinc Rende

During the last twenty years, there have been strong supporters of foreignaid, and equally strong critiques. The debate is based on an effort to establish acausal relationship between foreign aid and economic growth, and it is still ongoing.Rather than seeking to uncover the causal relationships, I examine foreign aid andits relation to structural indicators in aid dependent countries using a special typeof artificial neural networks, known as Kohonen maps. The findings suggest thataid allocation and coordination could be based on institutional and climate-basedsimilarities across recipient countries rather than the geographical proximity or thecultural ties, or preferences, between the donor and recipient countries.


2020 ◽  
Vol 29 (03) ◽  
pp. 2050005
Author(s):  
Mark C. Hughes

In this paper, we use artificial neural networks to predict and help compute the values of certain knot invariants. In particular, we show that neural networks are able to predict when a knot is quasipositive with a high degree of accuracy. Given a knot with unknown quasipositivity, we use these predictions to identify braid representatives that are likely to be quasipositive, which we then subject to further testing to verify. Using these techniques, we identify 84 new quasipositive 11 and 12-crossing knots. Furthermore, we show that neural networks are also able to predict and help compute the slice genus and Ozsváth-Szabó [Formula: see text]-invariant of knots.


2020 ◽  
Vol 63 (1) ◽  
pp. 78-83
Author(s):  
D. V. Sirotin

The article notes the increasing role of ferroalloy sub-sector in the qualitative development of metallurgy. Progress predicts of modern metallurgy are difficult in the context of increasing risks of global economic development. The high volatility of domestic producers’ prices for the main ferroalloys also has a negative impact. It is necessary to develop methodological tools for forecasting changes in market prices for metallurgical products with a high degree of accuracy. One of the important areas of application in metallurgy forecasting tools is construction of a model for forecasting the cost of ferroalloy products. It is the main purpose of the study. On the example of constructing a forecast model for changing the price of ferrosilicon, relevance of the neural network approach to forecasting the cost of ferroalloy products was substantiated. As part of the tasks of industry development, the capabilities of neural networks have been poorly studied to date. Formal description of the time series forecasting model based on neural networks is given. When constructing neural networks, any time series problem is represented as a multidimensional regression problem. The main parameters of predictive networks training are highlighted. The average price of ferrosilicon on the Russian market and the prices in the Russian regions were used as input variables. The networks that meet the qualitative criteria of forecasting models were trained. Selection of the networks was carried out taking into account the results of graphical analysis and cross-checking. A neural network model was constructed to predict the change in ferrosilicon price in the short term with high accuracy. This model can be useful in strategic decisions justifying in the activities of industry research institutes and metallurgical enterprises.


2000 ◽  
Vol 176 ◽  
pp. 135-136
Author(s):  
Toshiki Aikawa

AbstractSome pulsating post-AGB stars have been observed with an Automatic Photometry Telescope (APT) and a considerable amount of precise photometric data has been accumulated for these stars. The datasets, however, are still sparse, and this is a problem for applying nonlinear time series: for instance, modeling of attractors by the artificial neural networks (NN) to the datasets. We propose the optimization of data interpolations with the genetic algorithm (GA) and the hybrid system combined with NN. We apply this system to the Mackey–Glass equation, and attempt an analysis of the photometric data of post-AGB variables.


2000 ◽  
Vol 1719 (1) ◽  
pp. 103-111 ◽  
Author(s):  
Satish C. Sharma ◽  
Pawan Lingras ◽  
Guo X. Liu ◽  
Fei Xu

Estimation of the annual average daily traffic (AADT) for low-volume roads is investigated. Artificial neural networks are compared with the traditional factor approach for estimating AADT from short-period traffic counts. Fifty-five automatic traffic recorder (ATR) sites located on low-volume rural roads in Alberta, Canada, are used as study samples. The results of this study indicate that, when a single 48-h count is used for AADT estimation, the factor approach can yield better results than the neural networks if the ATR sites are grouped appropriately and the sample sites are correctly assigned to various ATR groups. Unfortunately, the current recommended practice offers little guidance on how to achieve the assignment accuracy that may be necessary to obtain reliable AADT estimates from a single 48-h count. The neural network approach can be particularly suitable for estimating AADT from two 48-h counts taken at different times during the counting season. In fact, the 95th percentile error values of about 25 percent as obtained in this study for the neural network models compare favorably with the values reported in the literature for low-volume roads using the traditional factor approach. The advantage of the neural network approach is that classification of ATR sites and sample site assignments to ATR groups are not required. The analysis of various groups of low-volume roads presented also leads to a conclusion that, when defining low-volume roads from a traffic monitoring point of view, it is not likely to matter much whether the AADT on the facility is less than 500 vehicles, less than 750 vehicles, or less than 1,000 vehicles.


Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 588
Author(s):  
Felipe Leite Coelho da Silva ◽  
Kleyton da Costa ◽  
Paulo Canas Rodrigues ◽  
Rodrigo Salas ◽  
Javier Linkolk López-Gonzales

Forecasting the industry’s electricity consumption is essential for energy planning in a given country or region. Thus, this study aims to apply time-series forecasting models (statistical approach and artificial neural network approach) to the industrial electricity consumption in the Brazilian system. For the statistical approach, the Holt–Winters, SARIMA, Dynamic Linear Model, and TBATS (Trigonometric Box–Cox transform, ARMA errors, Trend, and Seasonal components) models were considered. For the approach of artificial neural networks, the NNAR (neural network autoregression) and MLP (multilayer perceptron) models were considered. The results indicate that the MLP model was the one that obtained the best forecasting performance for the electricity consumption of the Brazilian industry under analysis.


Author(s):  
Kai-Chun Cheng ◽  
Ray E. Eberts

An Advanced Traveler Information System (ATIS), a key component of Intelligent Vehicle highway Systems (IVHS) in the near future, will help travelers find locations of restaurants, lodging, gas stations, and rest stops. On typical ATIS displays, which are now being incorporated in some advanced vehicles, the choices for these traveler services are presented to the vehicle occupants alphabetically. An experiment was conducted to determine whether individualizing the display through the use of neural networks enhanced performance when choosing restaurants. The neural network ATIS was compared to an ATIS that displayed the most frequently chosen restaurants at the top, one that alphabetized the list of restaurants, and one that randomly displayed the restaurant choices. The time to choose a restaurant was significantly faster for the individualized displays (neural network and frequency) when compared to the nonindividualized displays (alphabetical and random). When the two individualized displays were compared, choice time was significantly faster for the neural network approach.


Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3766 ◽  
Author(s):  
Shin-Hyung Song

In this research, hot deformation experiments of 316L stainless steel were carried out at a temperature range of 800–1000 °C and strain rate of 2 × 10−3–2 × 10−1. The flow stress behavior of 316L stainless steel was found to be highly dependent on the strain rate and temperature. After the experimental study, the flow stress was modeled using the Arrhenius-type constitutive equation, a neural network approach, and the support vector regression algorithm. The present research mainly focused on a comparative study of three algorithms for modeling the characteristics of hot deformation. The results indicated that the neural network approach and the support vector regression algorithm could be used to model the flow stress better than the approach of the Arrhenius-type equation. The modeling efficiency of the support vector regression algorithm was also found to be more efficient than the algorithm for neural networks.


Sign in / Sign up

Export Citation Format

Share Document