scholarly journals Limited thermal plasticity and geographic divergence in the ovipositor of Drosophila suzukii

2019 ◽  
Author(s):  
Ceferino Varón-González ◽  
Antoine Fraimout ◽  
Arnaud Delapré ◽  
Vincent Debat ◽  
Raphaël Cornette
Keyword(s):  
Geographic Origin ◽  
Invasion Success ◽  
Effect Of Temperature ◽  
Stabilizing Selection ◽  
Geographic Differentiation ◽  
Drosophila Suzukii ◽  
Thermal Plasticity ◽  
Novel Approach ◽  
Combined Use ◽  
Native Populations

AbstractPhenotypic plasticity has been repeatedly suggested to facilitate adaptation to new environmental conditions, as in invasions. Here we investigate this possibility by focusing on the worldwide invasion of Drosophila suzukii: an invasive species that has rapidly colonized all continents over the last decade. This species is characterized by a highly developed ovipositor, allowing females to lay eggs through the skin of ripe fruits. Using a novel approach based on the combined use of SEM and photogrammetry, we quantified the ovipositor size and 3D shape, contrasting invasive and native populations raised at three different developmental temperatures. We found a small but significant effect of temperature and geographic origin on the ovipositor shape, showing the occurrence of both geographic differentiation and plasticity to temperature. The shape reaction norms are in turn strikingly similar among populations, suggesting very little difference in shape plasticity among invasive and native populations, and therefore rejecting the hypothesis of a particular role for plasticity of the ovipositor in the invasion success. Overall, the ovipositor shape seems to be a fairly robust trait, indicative of stabilizing selection. The large performance spectrum rather than the flexibility of the ovipositor would thus contribute to the success of D. suzukii worldwide invasion.

scholarly journals Limited thermal plasticity and geographical divergence in the ovipositor of Drosophila suzukii

2020 ◽  
Vol 7 (1) ◽  
pp. 191577
Author(s):  
Ceferino Varón-González ◽  
Antoine Fraimout ◽  
Arnaud Delapré ◽  
Vincent Debat ◽  
Raphaël Cornette
Keyword(s):  
Three Dimensional ◽  
Invasion Success ◽  
Effect Of Temperature ◽  
Stabilizing Selection ◽  
Drosophila Suzukii ◽  
Thermal Plasticity ◽  
Novel Approach ◽  
Combined Use ◽  
Native Populations ◽  
Dimensional Shape

Phenotypic plasticity has been repeatedly suggested to facilitate adaptation to new environmental conditions, as in invasions. Here, we investigate this possibility by focusing on the worldwide invasion of Drosophila suzukii : an invasive species that has rapidly colonized all continents over the last decade. This species is characterized by a highly developed ovipositor, allowing females to lay eggs through the skin of ripe fruits. Using a novel approach based on the combined use of scanning electron microscopy and photogrammetry, we quantified the ovipositor size and three-dimensional shape, contrasting invasive and native populations raised at three different developmental temperatures. We found a small but significant effect of temperature and geographical origin on the ovipositor shape, showing the occurrence of both geographical differentiation and plasticity to temperature. The shape reaction norms are in turn strikingly similar among populations, suggesting very little difference in shape plasticity among invasive and native populations, and therefore rejecting the hypothesis of a particular role for the plasticity of the ovipositor in the invasion success. Overall, the ovipositor shape seems to be a fairly robust trait, indicative of stabilizing selection. The large performance spectrum rather than the flexibility of the ovipositor would thus contribute to the success of D. suzukii worldwide invasion.

scholarly journals Drosophila suzukii wing spot size is robust to developmental temperature

2019 ◽  
Author(s):  
Ceferino Varón-González ◽  
Antoine Fraimout ◽  
Vincent Debat
Keyword(s):  
Sexual Selection ◽  
Phenotypic Plasticity ◽  
Relative Size ◽  
Spot Size ◽  
Invasion Success ◽  
Directional Asymmetry ◽  
Stabilizing Selection ◽  
Wing Size ◽  
Drosophila Suzukii ◽  
Developmental Temperature

ABSTRACTPhenotypic plasticity is an important mechanism allowing adaptation to new environments and as such it has been suggested to facilitate biological invasions. Under this assumption, invasive populations are predicted to exhibit stronger plastic responses than native populations. Drosophila suzukii is an invasive species whose males harbor a spot on the wing tip. In this study, by manipulating developmental temperature, we compare the phenotypic plasticity of wing spot size of two invasive populations with that of a native population. We then compare the results with data obtained from wild-caught flies from different natural populations. While both wing size and spot size are plastic to temperature, no difference in plasticity was detected between native and invasive populations, rejecting the hypothesis of a role of the wing-spot plasticity in the invasion success. In contrast we observed a remarkable stability in the spot-to-wing ratio across temperatures, as well as among geographic populations. This stability suggests either that the spot relative size is under stabilizing selection, or that its variation might be constrained by a tight developmental correlation between spot size and wing size. Our data show that this correlation was lost at high temperature, leading to an increased variation in the relative spot size, particularly marked in the two invasive populations. This suggests (i) that D. suzukii’s development is impaired by hot temperatures, in agreement with the cold-adapted status of this species; (ii) that the spot size can be decoupled from wing size, rejecting the hypothesis of an absolute constraint and suggesting that the wing color pattern might be under stabilizing (sexual) selection; (iii) that such sexual selection might be relaxed in the invasive populations. Finally, a subtle but consistent directional asymmetry in spot size was detected in favor of the right side in all populations and temperatures, possibly indicative of a lateralized sexual behavior.

scholarly journals A Novel Approach for the Combined Use of AR Goggles and Mobile Devices as Communication Tools on the Shopfloor

Procedia CIRP ◽  
2014 ◽  
Vol 25 ◽  
pp. 132-137 ◽  
Author(s):  
G. Pintzos ◽  
L. Rentzos ◽  
N. Papakostas ◽  
G. Chryssolouris
Keyword(s):  
Mobile Devices ◽  
Communication Tools ◽  
Novel Approach ◽  
Combined Use

Carbon Nanotubes Grown on Metallic Wires by Cold Plasma Technique

2002 ◽  
Vol 737 ◽  
Author(s):  
D. Sarangi ◽  
A. Karimi
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Growth Conditions ◽  
Effect Of Temperature ◽  
Rutherford Back Scattering ◽  
Novel Approach ◽  
Transmission Electron ◽  
Back Scattering ◽  
Metallic Wires ◽  
Metal Wires

ABSTRACTCarbon nanotubes on metallic wires may be act as electrode for the field emission (FE) luminescent devices. Growing nanotubes on metallic wires with controlled density, length and alignment are challenging issues for this kind of devices. We, in the present investigation grow carbon nanotubes directly on the metal wires by a powerful but simple technique. A novel approach has been proposed to align nanotubes during growth. Methane, acetylene and dimethylamine have been used as source gases. With the same growth conditions (viz. pressure, growth temperature and plasma) methane does not produce any nanotube but nanotubes grown with dimethylamine show shorter length and radius than acetylene. The effect of temperature to control the radius, time to control the density, plasma conditions to align the nanotubes has been focused. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Rutherford Back Scattering (RBS) are used to characterize the nanotubes.

scholarly journals History of Oilseed Rape Cropping and Geographic Origin Affect the Genetic Structure of Plasmodiophora brassicae Populations

2014 ◽  
Vol 104 (5) ◽  
pp. 532-538 ◽  
Author(s):  
Becke Strehlow ◽  
Friederike de Mol ◽  
Christine Struck
Keyword(s):  
Oilseed Rape ◽  
Plasmodiophora Brassicae ◽  
Gene Diversity ◽  
Spatial Scales ◽  
Field Isolate ◽  
Geographic Origin ◽  
Fixation Index ◽  
Common Disease ◽  
Geographic Differentiation ◽  
Soilborne Pathogen

The soilborne pathogen Plasmodiophora brassicae causes clubroot on Brassica crops, a common disease in many oilseed rape growing regions. Here, we investigate genetic diversity and geographic differentiation of P. brassicae populations from different regions in Germany. We compared three regions that differ in oilseed rape cropping history, oilseed rape acreage, and incidence of clubroot. These regions were either spatially separated or separated by the former inner German border. Plasmodiophora isolates were collected from 59 fields (29, 17, and 13 fields per region, respectively) and 174 amplified fragment length polymorphism (AFLP) markers were analyzed. Every field isolate showed a unique genotype pattern; that is, no genotype was shared among the regions and different fields. The mean gene diversity was 0.27, suggesting that P. brassicae is a genetically diverse species. The comparison of indexes (gene diversity, genotypic diversity, and linkage disequilibrium) between the regions does not support our hypotheses that cropping history, oilseed rape acreage, and incidence of clubroot affect these estimates. Principal component analysis (PCA), fixation index (FST), and generalized linear model (GLM) were suitable to specify regional differences. PCA revealed two clusters of isolates based on the geographic origin of the isolates and FST showed that these clusters were highly differentiated. Hypotheses about association of genotypes with different spatial scales were tested with GLM: the region, reflecting the cropping history, and the individual field had a significant effect on the AFLP pattern. We propose that individual field isolates represent a discrete population and that geographic differentiation results from low levels of gene flow due to the limited dispersal of this soilborne pathogen and from localized selection pressure as unifying force on the genotypes.

Effect of Temperature, Reeling Speed and Pipe Tension on the Performance of Field Joint Coating During Reeling of Offshore Pipelines

2021 ◽  
Author(s):  
Rajaram Dhole ◽  
Ismael Ripoll ◽  
Sabesan Rajaratnam ◽  
Celine Jablonski
Keyword(s):  
Influential Factors ◽  
Influential Factor ◽  
Effect Of Temperature ◽  
Mechanical And Thermal Properties ◽  
Peak Strain ◽  
Element Analysis ◽  
Novel Approach ◽  
Laboratory Test Results ◽  
Coating Design ◽  
Highly Strained

Abstract Pipelines are coated with insulating material that minimizes heat losses to the environment. Reeled pipe can experience nominal bending strain in the order of 1% to 2%. Thick coating on the pipe is inherently more highly strained, because of concentrations that occur at the interface between parent coating and field joint coating. Occasionally, contractors who specialize in pipe-lay using the reeling method have experienced difficulties relating to unexpected disbondment and cracks in coating at these interfaces. Any disbonded coating is routinely identified and repaired, but it is important to understand the influential factors that could lead to this type of coating disbondment. It is known in the industry that parameters such as temperature, reeling speed and pipe tension are influential but the relative influence of the factors is not well understood. In addition, there is currently no industry code or recommended practice that proposes the strain levels that the coating could safely withstand prior to cracking. This paper addresses thermo-mechanical aspects of coating design and presents a novel approach to quantify which parameters have the largest influence. In the presented assessments, coating strain was assessed using finite element analysis. Material input was selected from a combination of typical values and specific laboratory test results for polypropylene (PP) and injection molded polypropylene (IMPP). An essential aspect was that the mechanical and thermal properties of the PP were related to temperature and strain rate. Strain rates in the coating during reeling operations were obtained from global FE models. Detailed local FE models incorporated all the material and load inputs and temperature conditions that are necessary to determine peak strain values in the coating; the peak strain values would indicate the locations of potential coating disbondment. The study is purely a strain assessment and excludes any potential for defects or delamination in the coating that could result from its manufacturing process. This strain-based study revealed that coating temperature during reeling is the most influential factor on strain level in the coating. Reeling speed and pipe tension are parameters providing secondary influences.

Effect of temperature on the development time and life‐time fecundity of Trichopria anastrephae parasitizing Drosophila suzukii

2020 ◽  
Vol 144 (10) ◽  
pp. 857-865
Author(s):  
Julia G. A. Vieira ◽  
Alexandra P. Krüger ◽  
Tiago Scheuneumann ◽  
Amanda M. Garcez ◽  
Maira C. Morais ◽  
...  
Keyword(s):  
Development Time ◽  
Life Time ◽  
Effect Of Temperature ◽  
Drosophila Suzukii

scholarly journals Root flavonoids are related to enhanced AMF colonization of an invasive tree

AoB Plants ◽  
2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Yingchun Pei ◽  
Evan Siemann ◽  
Baoliang Tian ◽  
Jianqing Ding
Keyword(s):  
Arbuscular Mycorrhizal Fungi ◽  
Invasive Plants ◽  
Mycorrhizal Fungi ◽  
Arbuscular Mycorrhizal ◽  
Plant Invasions ◽  
Invasion Success ◽  
Chemical Mechanism ◽  
Introduced Populations ◽  
Native Populations ◽  
Invasive Tree

Abstract Arbuscular mycorrhizal fungi (AMF) are important mutualistic microbes in soil, which have capacity to form mutualistic associations with most land plants. Arbuscular mycorrhizal fungi play an important role in plant invasions and their interactions with invasive plants have received increasing attention. However, the chemical mechanisms underlying the interactions of AMF and invasive plants are still poorly understood. In this study we aim to test whether root secondary chemicals are related to enhanced AMF colonization and rapid growth in an invasive tree. We conducted a common garden experiment in China with Chinese tallow tree (Triadica sebifera) to examine the relationships among AMF colonization and secondary metabolites in roots of plants from introduced (USA) and native (China) populations. We found that AMF colonization rate was higher in introduced populations compared to native populations. Roots of plants from introduced populations had lower levels of phenolics and tannins, but higher levels of flavonoids than those of plants from native populations. Flavonoids were positively correlated with AMF colonization, and this relationship was especially strong for introduced populations. Besides, AMF colonization was positively correlated with plant biomass suggesting that higher root flavonoids and AMF colonization may impact plant performance. This suggests that higher root flavonoids in plants from introduced populations may promote AMF spore germination and/or attract hyphae to their roots, which may subsequently increase plant growth. Overall, our results support a scenario in which invasive plants enhance their AMF association and invasion success via genetic changes in their root flavonoid metabolism. These findings advance our understanding of the mechanisms underlying plant invasion success and the evolutionary interactions between plants and AMF. Understanding such mechanisms of invasive plant success is critical for predicting and managing plant invasions in addition to providing important insights into the chemical mechanism of AMF–plant interactions.

Sign in / Sign up

Export Citation Format

Share Document