scholarly journals RH mapping by sequencing: chromosome-scale assembly of the duck genome

2019 ◽  
Author(s):  
Man Rao ◽  
Alain Vignal ◽  
Mireille Morisson ◽  
Valérie Fillon ◽  
Sophie Leroux ◽  
...  

AbstractLike many other species, the duck genome has been sequenced thanks to the technological breakthrough provided by the emergence of Next Generation Sequencing (NGS). The resulting de novo assemblies are however made of thousands of scattered scaffolds. To achieve chromosome-scale contiguity, long-range intermediate genome maps remain indispensable. Radiation Hybrid (RH) maps have been used to assist the generation of chromosome-scale genome assemblies by taking advantage of the high density SNP chips that provide a large number of markers that can be efficiently genotyped on the panel.In the absence of such a resource in duck, we sequenced 100 hybrid clones of a duck RH panel enabling direct genotyping of the assembly scaffolds on the panel. The rationale is to use scaffolds as markers and to genotype the scaffolds by sequencing the clones: the presence/absence of a scaffold in a particular sequenced hybrid is attested by the presence/absence of reads mapping specifically to this scaffold. The detection of scaffolds exhibiting a chromosomal breakage resulting from the irradiation process revealed itself to be a critical issue of this genotyping by sequencing process. This process resulted in the construction of RH vectors for 2,027 scaffolds, representing a total of about 1 Gb of sequences (95% of the current Duck genome assembly). The subsequent linkage analysis enabled the construction of RH maps and therefore to organize, i.e. order and orient, the scaffolds into pseudomolecules associated to the corresponding duck chromosomes. We describe here the whole mapping process, from sequence-based genotyping to the construction of comparative maps, as well as few examples of intra-chromosomal rearrangements that have been identified by the comparison with the chicken, turkey and zebra finch genomes and subsequently confirmed by FISH.We describe a method to order and orient sequence scaffolds into super-scaffolds spanning entire chromosomes. The method, which requires a pre-existing RH panel and sequence scaffolds from an NGS assembly, relies on a shallow sequencing of the RH clones. This approach was applied to the duck genome and produced chromosome-scale scaffolds for 29 out of the 41 duck chromosomes.


BMC Biology ◽  
2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Joel-E. Kuon ◽  
Weihong Qi ◽  
Pascal Schläpfer ◽  
Matthias Hirsch-Hoffmann ◽  
Philipp Rogalla von Bieberstein ◽  
...  

Abstract Background Cassava is an important food crop in tropical and sub-tropical regions worldwide. In Africa, cassava production is widely affected by cassava mosaic disease (CMD), which is caused by the African cassava mosaic geminivirus that is transmitted by whiteflies. Cassava breeders often use a single locus, CMD2, for introducing CMD resistance into susceptible cultivars. The CMD2 locus has been genetically mapped to a 10-Mbp region, but its organization and genes as well as their functions are unknown. Results We report haplotype-resolved de novo assemblies and annotations of the genomes for the African cassava cultivar TME (tropical Manihot esculenta), which is the origin of CMD2, and the CMD-susceptible cultivar 60444. The assemblies provide phased haplotype information for over 80% of the genomes. Haplotype comparison identified novel features previously hidden in collapsed and fragmented cassava genomes, including thousands of allelic variants, inter-haplotype diversity in coding regions, and patterns of diversification through allele-specific expression. Reconstruction of the CMD2 locus revealed a highly complex region with nearly identical gene sets but limited microsynteny between the two cultivars. Conclusions The genome maps of the CMD2 locus in both 60444 and TME3, together with the newly annotated genes, will help the identification of the causal genetic basis of CMD2 resistance to geminiviruses. Our de novo cassava genome assemblies will also facilitate genetic mapping approaches to narrow the large CMD2 region to a few candidate genes for better informed strategies to develop robust geminivirus resistance in susceptible cassava cultivars.



2018 ◽  
Vol 16 (05) ◽  
pp. 362-368 ◽  
Author(s):  
Federica Sullo ◽  
Agata Polizzi ◽  
Stefano Catanzaro ◽  
Selene Mantegna ◽  
Francesco Lacarrubba ◽  
...  

Cerebellotrigeminal dermal (CTD) dysplasia is a rare neurocutaneous disorder characterized by a triad of symptoms: bilateral parieto-occipital alopecia, facial anesthesia in the trigeminal area, and rhombencephalosynapsis (RES), confirmed by cranial magnetic resonance imaging. CTD dysplasia is also known as Gómez-López-Hernández syndrome. So far, only 35 cases have been described with varying symptomatology. The etiology remains unknown. Either spontaneous dominant mutations or de novo chromosomal rearrangements have been proposed as possible explanations. In addition to its clinical triad of RES, parietal alopecia, and trigeminal anesthesia, CTD dysplasia is associated with a wide range of phenotypic and neurodevelopmental abnormalities.Treatment is symptomatic and includes physical rehabilitation, special education, dental care, and ocular protection against self-induced corneal trauma that causes ulcers and, later, corneal opacification. The prognosis is correlated to the mental development, motor handicap, corneal–facial anesthesia, and visual problems. Follow-up on a large number of patients with CTD dysplasia has never been reported and experience is limited to few cases to date. High degree of suspicion in a child presenting with characteristic alopecia and RES has a great importance in diagnosis of this syndrome.



Animals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2226
Author(s):  
Sazia Kunvar ◽  
Sylwia Czarnomska ◽  
Cino Pertoldi ◽  
Małgorzata Tokarska

The European bison is a non-model organism; thus, most of its genetic and genomic analyses have been performed using cattle-specific resources, such as BovineSNP50 BeadChip or Illumina Bovine 800 K HD Bead Chip. The problem with non-specific tools is the potential loss of evolutionary diversified information (ascertainment bias) and species-specific markers. Here, we have used a genotyping-by-sequencing (GBS) approach for genotyping 256 samples from the European bison population in Bialowieza Forest (Poland) and performed an analysis using two integrated pipelines of the STACKS software: one is de novo (without reference genome) and the other is a reference pipeline (with reference genome). Moreover, we used a reference pipeline with two different genomes, i.e., Bos taurus and European bison. Genotyping by sequencing (GBS) is a useful tool for SNP genotyping in non-model organisms due to its cost effectiveness. Our results support GBS with a reference pipeline without PCR duplicates as a powerful approach for studying the population structure and genotyping data of non-model organisms. We found more polymorphic markers in the reference pipeline in comparison to the de novo pipeline. The decreased number of SNPs from the de novo pipeline could be due to the extremely low level of heterozygosity in European bison. It has been confirmed that all the de novo/Bos taurus and Bos taurus reference pipeline obtained SNPs were unique and not included in 800 K BovineHD BeadChip.



2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zev N. Kronenberg ◽  
Arang Rhie ◽  
Sergey Koren ◽  
Gregory T. Concepcion ◽  
Paul Peluso ◽  
...  

AbstractHaplotype-resolved genome assemblies are important for understanding how combinations of variants impact phenotypes. To date, these assemblies have been best created with complex protocols, such as cultured cells that contain a single-haplotype (haploid) genome, single cells where haplotypes are separated, or co-sequencing of parental genomes in a trio-based approach. These approaches are impractical in most situations. To address this issue, we present FALCON-Phase, a phasing tool that uses ultra-long-range Hi-C chromatin interaction data to extend phase blocks of partially-phased diploid assembles to chromosome or scaffold scale. FALCON-Phase uses the inherent phasing information in Hi-C reads, skipping variant calling, and reduces the computational complexity of phasing. Our method is validated on three benchmark datasets generated as part of the Vertebrate Genomes Project (VGP), including human, cow, and zebra finch, for which high-quality, fully haplotype-resolved assemblies are available using the trio-based approach. FALCON-Phase is accurate without having parental data and performance is better in samples with higher heterozygosity. For cow and zebra finch the accuracy is 97% compared to 80–91% for human. FALCON-Phase is applicable to any draft assembly that contains long primary contigs and phased associate contigs.



2012 ◽  
Vol 2012 ◽  
pp. 1-4 ◽  
Author(s):  
Marcelo Razera Baruffi ◽  
Deise Helena de Souza ◽  
Rosana Aparecida Bicudo da Silva ◽  
Ester Silveira Ramos ◽  
Danilo Moretti-Ferreira

Balanced X-autosome translocations are rare, and female carriers are a clinically heterogeneous group of patients, with phenotypically normal women, history of recurrent miscarriage, gonadal dysfunction, X-linked disorders or congenital abnormalities, and/or developmental delay. We investigated a patient with ade novoX;19 translocation. The six-year-old girl has been evaluated due to hyperactivity, social interaction impairment, stereotypic and repetitive use of language with echolalia, failure to follow parents/caretakers orders, inconsolable outbursts, and persistent preoccupation with parts of objects. The girl has normal cognitive function. Her measurements are within normal range, and no other abnormalities were found during physical, neurological, or dysmorphological examinations. Conventional cytogenetic analysis showed ade novobalanced translocation, with the karyotype 46,X,t(X;19)(p21.2;q13.4). Replication banding showed a clear preference for inactivation of the normal X chromosome. The translocation was confirmed by FISH and Spectral Karyotyping (SKY). Although abnormal phenotypes associated withde novobalanced chromosomal rearrangements may be the result of disruption of a gene at one of the breakpoints, submicroscopic deletion or duplication, or a position effect, X; autosomal translocations are associated with additional unique risk factors including X-linked disorders, functional autosomal monosomy, or functional X chromosome disomy resulting from the complex X-inactivation process.





2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Jinlong Huang ◽  
Yiping Zhao ◽  
Dongyi Bai ◽  
Wunierfu Shiraigol ◽  
Bei Li ◽  
...  

Abstract The donkey, like the horse, is a promising model for exploring karyotypic instability. We report the de novo whole-genome assemblies of the donkey and the Asiatic wild ass. Our results reflect the distinct characteristics of donkeys, including more effective energy metabolism and better immunity than horses. The donkey shows a steady demographic trajectory. We detected abundant satellite sequences in some inactive centromere regions but not in neocentromere regions, while ribosomal RNAs frequently emerged in neocentromere regions but not in the obsolete centromere regions. Expanded miRNA families and five newly discovered miRNA target genes involved in meiosis may be associated with fast karyotype evolution. APC/C, controlling sister chromatid segregation, cytokinesis and the establishment of the G1 cell cycle phase were identified by analysis of miRNA targets and rapidly evolving genes.



Author(s):  
Mitchell J Sullivan ◽  
Nouri L Ben Zakour ◽  
Brian M Forde ◽  
Mitchell Stanton-Cook ◽  
Scott A Beatson

Contiguity is an interactive software for the visualization and manipulation of de novo genome assemblies. Contiguity creates and displays information on contig adjacency which is contextualized by the simultaneous display of a comparison between assembled contigs and reference sequence. Where scaffolders allow unambiguous connections between contigs to be resolved into a single scaffold, Contiguity allows the user to create all potential scaffolds in ambiguous regions of the genome. This enables the resolution of novel sequence or structural variants from the assembly. In addition, Contiguity provides a sequencing and assembly agnostic approach for the creation of contig adjacency graphs. To maximize the number of contig adjacencies determined, Contiguity combines information from read pair mappings, sequence overlap and De Bruijn graph exploration. We demonstrate how highly sensitive graphs can be achieved using this method. Contig adjacency graphs allow the user to visualize potential arrangements of contigs in unresolvable areas of the genome. By combining adjacency information with comparative genomics, Contiguity provides an intuitive approach for exploring and improving sequence assemblies. It is also useful in guiding manual closure of long read sequence assemblies. Contiguity is an open source application, implemented using Python and the Tkinter GUI package that can run on any Unix, OSX and Windows operating system. It has been designed and optimized for bacterial assemblies. Contiguity is available at http://mjsull.github.io/Contiguity .



Author(s):  
Valentina Peona ◽  
Mozes P.K. Blom ◽  
Luohao Xu ◽  
Reto Burri ◽  
Shawn Sullivan ◽  
...  

AbstractGenome assemblies are currently being produced at an impressive rate by consortia and individual laboratories. The low costs and increasing efficiency of sequencing technologies have opened up a whole new world of genomic biodiversity. Although these technologies generate high-quality genome assemblies, there are still genomic regions difficult to assemble, like repetitive elements and GC-rich regions (genomic “dark matter”). In this study, we compare the efficiency of currently used sequencing technologies (short/linked/long reads and proximity ligation maps) and combinations thereof in assembling genomic dark matter starting from the same sample. By adopting different de-novo assembly strategies, we were able to compare each individual draft assembly to a curated multiplatform one and identify the nature of the previously missing dark matter with a particular focus on transposable elements, multi-copy MHC genes, and GC-rich regions. Thanks to this multiplatform approach, we demonstrate the feasibility of producing a high-quality chromosome-level assembly for a non-model organism (paradise crow) for which only suboptimal samples are available. Our approach was able to reconstruct complex chromosomes like the repeat-rich W sex chromosome and several GC-rich microchromosomes. Telomere-to-telomere assemblies are not a reality yet for most organisms, but by leveraging technology choice it is possible to minimize genome assembly gaps for downstream analysis. We provide a roadmap to tailor sequencing projects around the completeness of both the coding and non-coding parts of the genomes.



2020 ◽  
Author(s):  
Kyle Fletcher ◽  
Lin Zhang ◽  
Juliana Gil ◽  
Rongkui Han ◽  
Keri Cavanaugh ◽  
...  

AbstractBackgroundGenetic maps are an important resource for validation of genome assemblies, trait discovery, and breeding. Next generation sequencing has enabled production of high-density genetic maps constructed with 10,000s of markers. Most current approaches require a genome assembly to identify markers. Our Assembly Free Linkage Analysis Pipeline (AFLAP) removes this requirement by using uniquely segregating k-mers as markers to rapidly construct a genotype table and perform subsequent linkage analysis. This avoids potential biases including preferential read alignment and variant calling.ResultsThe performance of AFLAP was determined in simulations and contrasted to a conventional workflow. We tested AFLAP using 100 F2 individuals of Arabidopsis thaliana, sequenced to low coverage. Genetic maps generated using k-mers contained over 130,000 markers that were concordant with the genomic assembly. The utility of AFLAP was then demonstrated by generating an accurate genetic map using genotyping-by-sequencing data of 235 recombinant inbred lines of Lactuca spp. AFLAP was then applied to 83 F1 individuals of the oomycete Bremia lactucae, sequenced to >5x coverage. The genetic map contained over 90,000 markers ordered in 19 large linkage groups. This genetic map was used to fragment, order, orient, and scaffold the genome, resulting in a much-improved reference assembly.ConclusionsAFLAP can be used to generate high density linkage maps and improve genome assemblies of any organism when a mapping population is available using whole genome sequencing or genotyping-by-sequencing data. Genetic maps produced for B. lactucae were accurately aligned to the genome and guided significant improvements of the reference assembly.



Sign in / Sign up

Export Citation Format

Share Document