Propagation in and scattering from a matched metamaterial having a zero index of refraction

2004 ◽  
Vol 70 (4) ◽  
Author(s):  
Richard W. Ziolkowski
2014 ◽  
Vol 602-605 ◽  
pp. 2811-2815
Author(s):  
Yan Rong Zhang ◽  
Ji Jun Wang ◽  
Zhi Pan Zhu ◽  
Lei Lei Gong

In this paper, cross metal patches are inserted inside the conventional rectangular microstrip antenna, and thus it can work at two frequencies. The finite difference time domain (FDTD) method is selected to study effect of this left-handed metamaterial with near-zero-index of refraction. Compared with conventional rectangular microstrip antenna, effect of near-zero-index from positive and negative on conventional rectangular microstrip antenna are studied. Simulation results show this antenna works at two frequencies. Compared with conventional microstrip antenna, near-zero-index can improve antenna’s gain obviously.


Author(s):  
F. Hasselbach ◽  
A. Schäfer

Möllenstedt and Wohland proposed in 1980 two methods for measuring the coherence lengths of electron wave packets interferometrically by observing interference fringe contrast in dependence on the longitudinal shift of the wave packets. In both cases an electron beam is split by an electron optical biprism into two coherent wave packets, and subsequently both packets travel part of their way to the interference plane in regions of different electric potential, either in a Faraday cage (Fig. 1a) or in a Wien filter (crossed electric and magnetic fields, Fig. 1b). In the Faraday cage the phase and group velocity of the upper beam (Fig.1a) is retarded or accelerated according to the cage potential. In the Wien filter the group velocity of both beams varies with its excitation while the phase velocity remains unchanged. The phase of the electron wave is not affected at all in the compensated state of the Wien filter since the electron optical index of refraction in this state equals 1 inside and outside of the Wien filter.


Author(s):  
W. E. Lee

An optical waveguide consists of a several-micron wide channel with a slightly different index of refraction than the host substrate; light can be trapped in the channel by total internal reflection.Optical waveguides can be formed from single-crystal LiNbO3 using the proton exhange technique. In this technique, polished specimens are masked with polycrystal1ine chromium in such a way as to leave 3-13 μm wide channels. These are held in benzoic acid at 249°C for 5 minutes allowing protons to exchange for lithium ions within the channels causing an increase in the refractive index of the channel and creating the waveguide. Unfortunately, optical measurements often reveal a loss in waveguiding ability up to several weeks after exchange.


2001 ◽  
Vol 7 (S2) ◽  
pp. 148-149
Author(s):  
C.D. Poweleit ◽  
J Menéndez

Oil immersion lenses have been used in optical microscopy for a long time. The light’s wavelength is decreased by the oil’s index of refraction n and this reduces the minimum spot size. Additionally, the oil medium allows a larger collection angle, thereby increasing the numerical aperture. The SIL is based on the same principle, but offers more flexibility because the higher index material is solid. in particular, SILs can be deployed in cryogenic environments. Using a hemispherical glass the spatial resolution is improved by a factor n with respect to the resolution obtained with the microscope’s objective lens alone. The improvement factor is equal to n2 for truncated spheres.As shown in Fig. 1, the hemisphere SIL is in contact with the sample and does not affect the position of the focal plane. The focused rays from the objective strike the lens at normal incidence, so that no refraction takes place.


2015 ◽  
Vol 9 (1) ◽  
pp. 2303-2310
Author(s):  
Abderrahim Benchaib ◽  
Abdesselam Mdaa ◽  
Izeddine Zorkani ◽  
Anouar Jorio

The vanadium dioxide VO₂ currently became very motivating for the nanotechnologies’ researchers. It makes party of the intelligent materials because these optical properties abruptly change semiconductor state with metal at a critical  temperature θ = 68°C. This transition from reversible phase is carried out from a monoclinical structure characterizing its semiconductor state at low temperature towards the metal state of this material which becomes tétragonal rutile for  θ ˃ 68°C ; it is done during a few nanoseconds. Several studies were made on this material in a massive state and a thin layer. We will simulate by Maple the constant optics of a thin layer of VO₂ thickness z = 82 nm for the metal state according to the energy ω of the incidental photons in the energy interval: 0.001242 ≤ ω(ev) ≤ 6, from the infra-red (I.R) to the ultra-violet (U.V) so as to be able to control the various technological nano applications, like the detectors I.R or the U.V,  the intelligent windows to  increase  the energy efficiency in the buildings in order to save the cost of energy consumption by electric air-conditioning and the paintings containing nano crystals of this material. The constant optics, which we will simulate, is: the index of refraction, the reflectivity, the transmittivity, the coefficient of extinction, the dielectric functions ԑ₁ real part and  ԑ₂  imaginary part of the permittivity complexes ԑ of this material and the coefficient absorption. 


2015 ◽  
Vol 8 (2) ◽  
pp. 2148-2155 ◽  
Author(s):  
Abderrahim Benchaib ◽  
Abdesselam Mdaa ◽  
Izeddine Zorkani ◽  
Anouar Jorio

The vanadium dioxide is a material thermo chromium which sees its optical properties changing at the time of the transition from the phase of semiconductor state ↔ metal, at a critical temperature of 68°C. The study of the optical properties of a thin layer of VO₂ thickness 82 nm, such as the dielectric function, the index of refraction, the coefficient ofextinction, the absorption’s coefficient, the reflectivity, the transmittivity, in the photonic spectrum of energy ω located inthe interval: 0.001242 ≤ ω (ev) ≤ 6, enables us to control well its practical utility in various applications, like the intelligentpanes, the photovoltaic, paintings for increasing energy efficiency in buildings, detectors of infra-red (I.R) or ultra-violet(U.V). We will make simulations with Maple and compare our results with those of the literature


Sign in / Sign up

Export Citation Format

Share Document